From: Jonathan Marek Date: Tue, 9 Jun 2020 19:40:21 +0000 (-0400) Subject: arm64: dts: qcom: sm8150: add apps_smmu node X-Git-Tag: v5.11-rc1~91^2~30^2~51 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=4815623259f533aec4513c72da20a0ac1c80233b;p=thirdparty%2Flinux.git arm64: dts: qcom: sm8150: add apps_smmu node Add the apps_smmu node for sm8150. For UFS, now that the kernel initializes the iommu, the stream mappings set by the bootloader are cleared. Adding the iommus property is required so that new mappings are created for UFS. Signed-off-by: Jonathan Marek Reviewed-by: Sai Prakash Ranjan Tested-by: Sai Prakash Ranjan Link: https://lore.kernel.org/r/20200609194030.17756-4-jonathan@marek.ca Signed-off-by: Bjorn Andersson --- diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 838586140c480..0d932c7d5e956 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -509,6 +509,8 @@ resets = <&gcc GCC_UFS_PHY_BCR>; reset-names = "rst"; + iommus = <&apps_smmu 0x300 0>; + clock-names = "core_clk", "bus_aggr_clk", @@ -929,6 +931,7 @@ compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; interrupts = ; + iommus = <&apps_smmu 0x140 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; phys = <&usb_1_hsphy>, <&usb_1_ssphy>; @@ -994,6 +997,94 @@ cell-index = <0>; }; + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8150-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + remoteproc_adsp: remoteproc@17300000 { compatible = "qcom,sm8150-adsp-pas"; reg = <0x0 0x17300000 0x0 0x4040>;