From: Aksh Garg Date: Thu, 6 Nov 2025 09:23:04 +0000 (+0530) Subject: net: ethernet: ti: am65-cpsw-qos: fix IET verify/response timeout X-Git-Tag: v6.18-rc6~31^2~15^2~1 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=49b3916465176a5abcb29a0e464825f553d55d58;p=thirdparty%2Fkernel%2Flinux.git net: ethernet: ti: am65-cpsw-qos: fix IET verify/response timeout The CPSW module uses the MAC_VERIFY_CNT bit field in the CPSW_PN_IET_VERIFY_REG_k register to set the verify/response timeout count. This register specifies the number of clock cycles to wait before resending a verify packet if the verification fails. The verify/response timeout count, as being set by the function am65_cpsw_iet_set_verify_timeout_count() is hardcoded for 125MHz clock frequency, which varies based on PHY mode and link speed. The respective clock frequencies are as follows: - RGMII mode: * 1000 Mbps: 125 MHz * 100 Mbps: 25 MHz * 10 Mbps: 2.5 MHz - QSGMII/SGMII mode: 125 MHz (all speeds) Fix this by adding logic to calculate the correct timeout counts based on the actual PHY interface mode and link speed. Fixes: 49a2eb9068246 ("net: ethernet: ti: am65-cpsw-qos: Add Frame Preemption MAC Merge support") Signed-off-by: Aksh Garg Link: https://patch.msgid.link/20251106092305.1437347-2-a-garg7@ti.com Signed-off-by: Jakub Kicinski --- diff --git a/drivers/net/ethernet/ti/am65-cpsw-qos.c b/drivers/net/ethernet/ti/am65-cpsw-qos.c index fa96db7c1a130..ad06942ce461a 100644 --- a/drivers/net/ethernet/ti/am65-cpsw-qos.c +++ b/drivers/net/ethernet/ti/am65-cpsw-qos.c @@ -276,9 +276,31 @@ static int am65_cpsw_iet_set_verify_timeout_count(struct am65_cpsw_port *port) /* The number of wireside clocks contained in the verify * timeout counter. The default is 0x1312d0 * (10ms at 125Mhz in 1G mode). + * The frequency of the clock depends on the link speed + * and the PHY interface. */ - val = 125 * HZ_PER_MHZ; /* assuming 125MHz wireside clock */ + switch (port->slave.phy_if) { + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + if (port->qos.link_speed == SPEED_1000) + val = 125 * HZ_PER_MHZ; /* 125 MHz at 1000Mbps*/ + else if (port->qos.link_speed == SPEED_100) + val = 25 * HZ_PER_MHZ; /* 25 MHz at 100Mbps*/ + else + val = (25 * HZ_PER_MHZ) / 10; /* 2.5 MHz at 10Mbps*/ + break; + + case PHY_INTERFACE_MODE_QSGMII: + case PHY_INTERFACE_MODE_SGMII: + val = 125 * HZ_PER_MHZ; /* 125 MHz */ + break; + default: + netdev_err(port->ndev, "selected mode does not supported IET\n"); + return -EOPNOTSUPP; + } val /= MILLIHZ_PER_HZ; /* count per ms timeout */ val *= verify_time_ms; /* count for timeout ms */