From: Marc Zyngier Date: Thu, 18 Jul 2019 12:18:51 +0000 (+0100) Subject: dt-bindings: interrupt-controller: arm,gic-v3: Describe EPPI range support X-Git-Tag: v5.4-rc1~161^2^2~17 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=4b049063e0bcbfd302f6bf867de9d55a965d622e;p=thirdparty%2Fkernel%2Flinux.git dt-bindings: interrupt-controller: arm,gic-v3: Describe EPPI range support Update the GICv3 binding to allow interrupts in the EPPI range. Signed-off-by: Marc Zyngier --- diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 98a3ecda8e079..1fe147daca4cb 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -44,12 +44,13 @@ properties: be at least 4. The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI - interrupts, 2 for interrupts in the Extended SPI range. Other values - are reserved for future use. + interrupts, 2 for interrupts in the Extended SPI range, 3 for the + Extended PPI range. Other values are reserved for future use. The 2nd cell contains the interrupt number for the interrupt type. SPI interrupts are in the range [0-987]. PPI interrupts are in the range [0-15]. Extented SPI interrupts are in the range [0-1023]. + Extended PPI interrupts are in the range [0-127]. The 3rd cell is the flags, encoded as follows: bits[3:0] trigger type and level flags.