From: Wolfram Sang Date: Sun, 7 Jul 2024 08:28:46 +0000 (+0200) Subject: i2c: rcar: bring hardware to known state when probing X-Git-Tag: v6.10~4^2^2~2 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=4e36c0f20cb1c74c7bd7ea31ba432c1c4a989031;p=thirdparty%2Flinux.git i2c: rcar: bring hardware to known state when probing When probing, the hardware is not brought into a known state. This may be a problem when a hypervisor restarts Linux without resetting the hardware, leaving an old state running. Make sure the hardware gets initialized, especially interrupts should be cleared and disabled. Reported-by: Dirk Behme Reported-by: Geert Uytterhoeven Closes: https://lore.kernel.org/r/20240702045535.2000393-1-dirk.behme@de.bosch.com Fixes: 6ccbe607132b ("i2c: add Renesas R-Car I2C driver") Signed-off-by: Wolfram Sang Signed-off-by: Andi Shyti --- diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 828aa2ea0fe4c..ec73463ea9b5e 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -257,6 +257,14 @@ static void rcar_i2c_init(struct rcar_i2c_priv *priv) } } +static void rcar_i2c_reset_slave(struct rcar_i2c_priv *priv) +{ + rcar_i2c_write(priv, ICSIER, 0); + rcar_i2c_write(priv, ICSSR, 0); + rcar_i2c_write(priv, ICSCR, SDBS); + rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */ +} + static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv) { int ret; @@ -1033,11 +1041,8 @@ static int rcar_unreg_slave(struct i2c_client *slave) /* ensure no irq is running before clearing ptr */ disable_irq(priv->irq); - rcar_i2c_write(priv, ICSIER, 0); - rcar_i2c_write(priv, ICSSR, 0); + rcar_i2c_reset_slave(priv); enable_irq(priv->irq); - rcar_i2c_write(priv, ICSCR, SDBS); - rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */ priv->slave = NULL; @@ -1152,7 +1157,9 @@ static int rcar_i2c_probe(struct platform_device *pdev) goto out_pm_disable; } - rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */ + /* Bring hardware to known state */ + rcar_i2c_init(priv); + rcar_i2c_reset_slave(priv); if (priv->devtype < I2C_RCAR_GEN3) { irqflags |= IRQF_NO_THREAD;