From: Jasper Korten Date: Tue, 3 Oct 2023 13:18:30 +0000 (+0200) Subject: arm64: dts: qcom: msm8916-samsung-gt5: Add sound and modem X-Git-Tag: v6.8-rc1~130^2~8^2~231^2~5 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=4f6b5edbcfbaa1061c29e6259cc5653f44b673da;p=thirdparty%2Fkernel%2Flinux.git arm64: dts: qcom: msm8916-samsung-gt5: Add sound and modem Enable sound and modem for the Samsung Galaxy Tab A 2015 tablets. The setup is similar to most MSM8916 devices, i.e.: - QDSP6 audio - Headphones/microphones via digital/analog codec in MSM8916/PM8916. Earpiece exists on samsung-gt58 only. - WWAN Internet via BAM-DMUX except: - gt510: Stereo Maxim MAX98357A codecs for speaker on Quaternary MI2S - gt58: Mono NXP TFA9895 codec for speaker on Quaternary MI2S - For some reason connected to GPIOs where no hardware I2C controller is available -> need to use i2c-gpio - Samsung-specific audio jack detection (not supported yet) Signed-off-by: Jasper Korten Co-developed-by: Siddharth Manthan Signed-off-by: Siddharth Manthan Co-developed-by: Nikita Travkin Signed-off-by: Nikita Travkin [Stephan: Add consistent commit message, minor refactoring] Signed-off-by: Stephan Gerhold Link: https://lore.kernel.org/r/20231003-msm8916-modem-v2-12-61b684be55c0@gerhold.net Signed-off-by: Bjorn Andersson --- diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi index 6a16eb5ce07bb..fbd2caf405d5f 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi @@ -3,9 +3,12 @@ /dts-v1/; #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + #include #include #include +#include / { aliases { @@ -116,6 +119,29 @@ status = "okay"; }; +/* + * For some reason the speaker amplifier is connected to the second SD line + * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the + * device tree, otherwise audio will seemingly play fine on the wrong SD line + * but the speaker stays silent. + * + * When routing audio via QDSP6 (the default) the &lpass node is reserved and + * the definitions from &q6afedai are used. When the modem is disabled audio can + * be alternatively routed directly to the LPASS hardware with reduced latency. + * The definitions for &lpass are here for completeness to simplify changing the + * setup with minor changes to the DT (either manually or with DT overlays). + */ +&lpass { + dai-link@3 { + reg = ; + qcom,playback-sd-lines = <1>; + }; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5400000>; +}; + &pm8916_resin { linux,code = ; status = "okay"; @@ -133,6 +159,13 @@ status = "okay"; }; +&q6afedai { + dai@22 { + reg = ; + qcom,sd-lines = <1>; + }; +}; + &sdhc_1 { status = "okay"; }; @@ -147,6 +180,27 @@ status = "okay"; }; +&sound { + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + sound_link_backend2: backend2-dai-link { + link-name = "Quaternary MI2S"; + + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&speaker_codec>; + }; + }; +}; + &usb { dr_mode = "peripheral"; extcon = <&pm8916_usbin>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts index c3f1acc550781..5b34529b816c8 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts @@ -9,6 +9,14 @@ compatible = "samsung,gt510", "qcom,msm8916"; chassis-type = "tablet"; + speaker_codec: audio-codec { + compatible = "maxim,max98357a"; + sdmode-gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + pinctrl-0 = <&audio_sdmode_default>; + pinctrl-names = "default"; + }; + clk_pwm: pwm { compatible = "clk-pwm"; #pwm-cells = <2>; @@ -146,7 +154,21 @@ remote-endpoint = <&panel_in>; }; +&sound { + model = "samsung-gt510"; + pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>; + pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>; + pinctrl-names = "default", "sleep"; +}; + &tlmm { + audio_sdmode_default: audio-sdmode-default-state { + pins = "gpio55"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + buckbooster_en_default: buckbooster-en-default-state { pins = "gpio51"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts index 998625abd409b..579312ed53ce1 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts @@ -35,6 +35,26 @@ pinctrl-names = "default"; }; + i2c-amplifier { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 55 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 56 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + pinctrl-0 = <&_i2c_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + speaker_codec: audio-codec@34 { + compatible = "nxp,tfa9895"; + reg = <0x34>; + vddd-supply = <&pm8916_l5>; + sound-name-prefix = "Speaker"; + #sound-dai-cells = <0>; + }; + }; + vibrator { compatible = "gpio-vibrator"; enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; @@ -98,7 +118,21 @@ remote-endpoint = <&panel_in>; }; +&sound { + model = "samsung-a2015"; + pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default &secondary_mic_default>; + pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep &secondary_mic_default>; + pinctrl-names = "default", "sleep"; +}; + &tlmm { + amp_i2c_default: amp-i2c-default-state { + pins = "gpio55", "gpio56"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + buckbooster_en_default: buckbooster-en-default-state { pins = "gpio8"; function = "gpio"; @@ -127,6 +161,14 @@ bias-disable; }; + secondary_mic_default: secondary-mic-default-state { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + tsp_int_default: tsp-int-default-state { pins = "gpio13"; function = "gpio";