From: Stanislav Jakubek <stano.jakubek@gmail.com>
Date: Sun, 9 Jun 2024 11:05:43 +0000 (+0200)
Subject: ARM: dts: qcom: motorola-falcon: add accelerometer, magnetometer
X-Git-Tag: v6.11-rc1~188^2~13^2~9
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=5756101babc5334a9bc99601d1cc0d6776fa9ada;p=thirdparty%2Fkernel%2Flinux.git

ARM: dts: qcom: motorola-falcon: add accelerometer, magnetometer

Add the accelerometer and magnetometer that are present on the Motorola
Moto G (2013) device.

Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Link: https://lore.kernel.org/r/ZmWMh6fuLasvGkR/@standask-GA-A55M-S2HP
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
---

diff --git a/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
index 029e1b1659c93..5dbca83f22309 100644
--- a/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
+++ b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
@@ -96,6 +96,35 @@
 	};
 };
 
+&blsp1_i2c2 {
+	status = "okay";
+
+	magnetometer@c {
+		compatible = "asahi-kasei,ak8963";
+		reg = <0xc>;
+		interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&pm8226_l19>;
+		vid-supply = <&pm8226_lvs1>;
+		pinctrl-0 = <&mag_int_default &mag_reset_default>;
+		pinctrl-names = "default";
+	};
+
+	accelerometer@19 {
+		compatible = "st,lis3dh-accel";
+		reg = <0x19>;
+		interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l19>;
+		vddio-supply = <&pm8226_lvs1>;
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+		mount-matrix = "0", "1", "0",
+			       "1", "0", "0",
+			       "0", "0", "-1";
+		st,drdy-int-pin = <1>;
+	};
+};
+
 &blsp1_i2c3 {
 	status = "okay";
 
@@ -321,6 +350,30 @@
 };
 
 &tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio63";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-disable;
+	};
+
+	mag_int_default: mag-int-default-state {
+		pins = "gpio66";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-disable;
+	};
+
+	mag_reset_default: mag-reset-default-state {
+		pins = "gpio62";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
 	reg_lcd_default: reg-lcd-default-state {
 		pins = "gpio31", "gpio33";
 		function = "gpio";