From: Marco Felsch Date: Thu, 27 Feb 2020 11:02:46 +0000 (+0100) Subject: ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage X-Git-Tag: v5.6~8^2~7^2 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=636b45b8efa91db05553840b6c0120d6fa6b94fa;p=thirdparty%2Fkernel%2Flinux.git ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage The current set minimum voltage of 730000µV seems to be wrong. I don't know the document which specifies that but the imx6qdl datasheets says that the minimum voltage should be 0.925V for VDD_ARM (LDO bypassed, lowest opp) and 1.15V for VDD_SOC (LDO bypassed, lowest opp). Fixes: ddec5d1c0047 ("ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM") Signed-off-by: Marco Felsch Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi index 4d18952658f84..77d871340eb74 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi @@ -112,7 +112,7 @@ regulators { vdd_arm: buck1 { regulator-name = "vdd_arm"; - regulator-min-microvolt = <730000>; + regulator-min-microvolt = <925000>; regulator-max-microvolt = <1380000>; regulator-initial-mode = ; regulator-always-on; @@ -120,7 +120,7 @@ vdd_soc: buck2 { regulator-name = "vdd_soc"; - regulator-min-microvolt = <730000>; + regulator-min-microvolt = <1150000>; regulator-max-microvolt = <1380000>; regulator-initial-mode = ; regulator-always-on;