From: Anurag Dutta <a-dutta@ti.com>
Date: Wed, 27 Nov 2024 07:56:44 +0000 (+0530)
Subject: arm64: dts: ti: k3-j7200: Add node to disable loopback connection
X-Git-Tag: v6.14-rc1~103^2~7^2~9
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=6b51892b31fe83fe7cc8cf69e4bf7721cf08951b;p=thirdparty%2Flinux.git

arm64: dts: ti: k3-j7200: Add node to disable loopback connection

CTRLMMR_MCU_SPI1_CTRL register controls if MCU_SPI1 is directly
connected to SPI3 in the MAIN Domain (default) or if MCU_SPI1
and SPI3 are independently pinned out. By default, the field
SPI1_LINKDIS (Bit 0) is set to 0h. In order to disable the direct
connection, the SPI1_LINKDIS (Bit 0) needs to be set to 1h. Model
this functionality as a "reg-mux" device and based on the idle-state
property, enable/disable the connection bewtween MCU_SPI1 and MAIN_SPI3.

The register field description has been referred from J7200 TRM [1]
(Table 5-517. CTRLMMR_MCU_SPI1_CTRL Register Field Descriptions).

[1] https://www.ti.com/lit/pdf/spruiu1

Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Link: https://lore.kernel.org/r/20241127075644.210759-1-a-dutta@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
---

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index db43e7e10b76d..f684ce6ad9ad2 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -409,6 +409,10 @@
 		      <J7200_SERDES0_LANE2_QSGMII_LANE1>, <J7200_SERDES0_LANE3_IP4_UNUSED>;
 };
 
+&mcu_spi1 {
+	mux-controls = <&spi1_linkdis 0>;
+};
+
 &usb_serdes_mux {
 	idle-states = <1>; /* USB0 to SERDES lane 3 */
 	bootph-all;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 6a84538658746..56ab144fea07e 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -184,6 +184,13 @@
 			reg = <0x4040 0x4>;
 			#phy-cells = <1>;
 		};
+
+		spi1_linkdis: mux-controller@4060 {
+			compatible = "reg-mux";
+			reg = <0x4060 0x4>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x0 0x1>;
+		};
 	};
 
 	wkup_conf: bus@43000000 {