From: Johan Hovold Date: Fri, 25 Oct 2024 12:16:22 +0000 (+0200) Subject: pinctrl: qcom: spmi: fix debugfs drive strength X-Git-Tag: v6.13-rc1~85^2~2 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=6bc0ebfb1d920f13c522545f114cdabb49e9408a;p=thirdparty%2Flinux.git pinctrl: qcom: spmi: fix debugfs drive strength Commit 723e8462a4fe ("pinctrl: qcom: spmi-gpio: Fix the GPIO strength mapping") fixed a long-standing issue in the Qualcomm SPMI PMIC gpio driver which had the 'low' and 'high' drive strength settings switched but failed to update the debugfs interface which still gets this wrong. Fix the debugfs code so that the exported values match the hardware settings. Note that this probably means that most devicetrees that try to describe the firmware settings got this wrong if the settings were derived from debugfs. Before the above mentioned commit the settings would have actually matched the firmware settings even if they were described incorrectly, but now they are inverted. Fixes: 723e8462a4fe ("pinctrl: qcom: spmi-gpio: Fix the GPIO strength mapping") Fixes: eadff3024472 ("pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver") Cc: Anjelique Melendez Cc: stable@vger.kernel.org # 3.19 Signed-off-by: Johan Hovold Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/20241025121622.1496-1-johan+linaro@kernel.org Signed-off-by: Linus Walleij --- diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index ab07299ef39fa..0c806b8128b63 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -667,7 +667,7 @@ static void pmic_gpio_config_dbg_show(struct pinctrl_dev *pctldev, "push-pull", "open-drain", "open-source" }; static const char *const strengths[] = { - "no", "high", "medium", "low" + "no", "low", "medium", "high" }; pad = pctldev->desc->pins[pin].drv_data;