From: Erikas Bitovtas Date: Wed, 25 Feb 2026 14:43:24 +0000 (+0200) Subject: arm64: dts: qcom: msm8939-asus-z00t: add ambient light and proximity sensor X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=6c4b960981ddc676cecd929dd76d6e01bc5c424b;p=thirdparty%2Fkernel%2Flinux.git arm64: dts: qcom: msm8939-asus-z00t: add ambient light and proximity sensor This device uses Capella CM36686 as its ambient light and proximity sensor. It is fully compatible with Vishay VCNL4040. Downstream device tree reports Capella CM36283, but upon probe, a device ID for CM36686 is actually found. This commit adds support for Capella CM36686 ambient light and proximity sensor. Signed-off-by: Erikas Bitovtas Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260225-z00t-capella-sensor-v1-1-99f767bc326a@gmail.com Signed-off-by: Bjorn Andersson --- diff --git a/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts index ea90b00a2c8a..1a340fa92755 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts @@ -147,6 +147,17 @@ pinctrl-names = "default"; }; + light-sensor@60 { + compatible = "capella,cm36686", "vishay,vcnl4040"; + reg = <0x60>; + + interrupts-extended = <&tlmm 113 IRQ_TYPE_EDGE_FALLING>; + proximity-near-level = <30>; + + pinctrl-0 = <&light_int_default>; + pinctrl-names = "default"; + }; + imu@68 { compatible = "invensense,mpu6515"; reg = <0x68>; @@ -330,4 +341,11 @@ drive-strength = <2>; bias-disable; }; + + light_int_default: light-int-default-state { + pins = "gpio113"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; };