From: Krzysztof Kozlowski <krzk@kernel.org>
Date: Thu, 29 Oct 2020 16:20:21 +0000 (+0100)
Subject: dt-bindings: mtd: gpmi-nand: Fix matching of clocks on different SoCs
X-Git-Tag: v5.11-rc1~98^2^3~17
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=6d912c49af2434688b329db538739a733a65414c;p=thirdparty%2Fkernel%2Flinux.git

dt-bindings: mtd: gpmi-nand: Fix matching of clocks on different SoCs

Driver requires different amount of clocks for different SoCs.  Describe
these requirements properly to fix dtbs_check warnings like:

    arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml: nand-controller@33002000: clock-names:1: 'gpmi_apb' was expected

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201029162021.80839-1-krzk@kernel.org
---

diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
index 28ff8c581837a..9d764e654e1db 100644
--- a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
@@ -9,9 +9,6 @@ title: Freescale General-Purpose Media Interface (GPMI) binding
 maintainers:
   - Han Xu <han.xu@nxp.com>
 
-allOf:
-  - $ref: "nand-controller.yaml"
-
 description: |
   The GPMI nand controller provides an interface to control the NAND
   flash chips. The device tree may optionally contain sub-nodes
@@ -58,22 +55,10 @@ properties:
   clocks:
     minItems: 1
     maxItems: 5
-    items:
-      - description: SoC gpmi io clock
-      - description: SoC gpmi apb clock
-      - description: SoC gpmi bch clock
-      - description: SoC gpmi bch apb clock
-      - description: SoC per1 bch clock
 
   clock-names:
     minItems: 1
     maxItems: 5
-    items:
-      - const: gpmi_io
-      - const: gpmi_apb
-      - const: gpmi_bch
-      - const: gpmi_bch_apb
-      - const: per1_bch
 
   fsl,use-minimum-ecc:
     type: boolean
@@ -107,6 +92,67 @@ required:
 
 unevaluatedProperties: false
 
+allOf:
+  - $ref: "nand-controller.yaml"
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx23-gpmi-nand
+              - fsl,imx28-gpmi-nand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: SoC gpmi io clock
+        clock-names:
+          items:
+            - const: gpmi_io
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6q-gpmi-nand
+              - fsl,imx6sx-gpmi-nand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: SoC gpmi io clock
+            - description: SoC gpmi apb clock
+            - description: SoC gpmi bch clock
+            - description: SoC gpmi bch apb clock
+            - description: SoC per1 bch clock
+        clock-names:
+          items:
+            - const: gpmi_io
+            - const: gpmi_apb
+            - const: gpmi_bch
+            - const: gpmi_bch_apb
+            - const: per1_bch
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx7d-gpmi-nand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: SoC gpmi io clock
+            - description: SoC gpmi bch apb clock
+        clock-names:
+          minItems: 2
+          maxItems: 2
+          items:
+            - const: gpmi_io
+            - const: gpmi_bch_apb
+
 examples:
   - |
     nand-controller@8000c000 {