From: Phil Elwell <phil@raspberrypi.com>
Date: Sun, 23 Feb 2025 12:56:14 +0000 (+0100)
Subject: arm64: dts: bcm2712: PL011 UARTs are actually r1p5
X-Git-Tag: v6.14~25^2~13^2
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=768953614c1c13fdf771be5742f1be573eea8fa4;p=thirdparty%2Fkernel%2Flinux.git

arm64: dts: bcm2712: PL011 UARTs are actually r1p5

The ARM PL011 UART instances in BCM2712 are r1p5 spec, which means they
have 32-entry FIFOs. The correct periphid value for this is 0x00341011.
Thanks to N Buchwitz for pointing this out.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250223125614.3592-3-wahrenst@gmx.net
Fixes: faa3381267d0 ("arm64: dts: broadcom: Add minimal support for Raspberry Pi 5")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---

diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index 689c82b7f596a..9e610a89a3378 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -227,7 +227,7 @@
 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_uart>, <&clk_vpu>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};