From: Serge Semin Date: Fri, 10 Jun 2022 10:45:00 +0000 (+0300) Subject: gpio: dwapb: Don't print error on -EPROBE_DEFER X-Git-Tag: v5.19-rc2~6^2 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=77006f6edc0e0f58617eb25e53731f78641e820d;p=thirdparty%2Fkernel%2Flinux.git gpio: dwapb: Don't print error on -EPROBE_DEFER Currently if the APB or Debounce clocks aren't yet ready to be requested the DW GPIO driver will correctly handle that by deferring the probe procedure, but the error is still printed to the system log. It needlessly pollutes the log since there was no real error but a request to postpone the clock request procedure since the clocks subsystem hasn't been fully initialized yet. Let's fix that by using the dev_err_probe method to print the APB/clock request error status. It will correctly handle the deferred probe situation and print the error if it actually happens. Signed-off-by: Serge Semin Reviewed-by: Andy Shevchenko Signed-off-by: Bartosz Golaszewski --- diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c index 04afe728e1874..c22fcaa44a614 100644 --- a/drivers/gpio/gpio-dwapb.c +++ b/drivers/gpio/gpio-dwapb.c @@ -662,10 +662,9 @@ static int dwapb_get_clks(struct dwapb_gpio *gpio) gpio->clks[1].id = "db"; err = devm_clk_bulk_get_optional(gpio->dev, DWAPB_NR_CLOCKS, gpio->clks); - if (err) { - dev_err(gpio->dev, "Cannot get APB/Debounce clocks\n"); - return err; - } + if (err) + return dev_err_probe(gpio->dev, err, + "Cannot get APB/Debounce clocks\n"); err = clk_bulk_prepare_enable(DWAPB_NR_CLOCKS, gpio->clks); if (err) {