From: Manorit Chawdhry <m-chawdhry@ti.com>
Date: Thu, 24 Oct 2024 05:21:06 +0000 (+0530)
Subject: arm64: dts: ti: k3-am68-sk*: Add bootph-* properties
X-Git-Tag: v6.13-rc1~140^2~16^2~29
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=781cb8f1ad769c7999ef3b35f216ff150130f3ee;p=thirdparty%2Fkernel%2Flinux.git

arm64: dts: ti: k3-am68-sk*: Add bootph-* properties

Adds bootph-* properties to the leaf nodes to enable bootloaders to
utilise them.

Following adds bootph-* to:
- main_uart8, mcu_uart0(DM), wkup_uart0(TIFS) for Traces
- mmc1, ospi0 for enabling various bootmodes.
- eeprom for board detection

Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-9-2af90e3a4fe7@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---

diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index d5ceab79536ca..11522b36e0cec 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -184,6 +184,7 @@
 			J721S2_IOPAD(0x0d0, PIN_INPUT, 11) /* (AF26) SPI0_CS1.UART8_RXD */
 			J721S2_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AH27) SPI0_CLK.UART8_TXD */
 		>;
+		bootph-all;
 	};
 
 	main_i2c0_pins_default: main-i2c0-default-pins {
@@ -211,6 +212,7 @@
 			J721S2_IOPAD(0x0f0, PIN_INPUT, 0) /* (R22) MMC1_DAT3 */
 			J721S2_IOPAD(0x0e8, PIN_INPUT, 8) /* (AE25) TIMER_IO0.MMC1_SDCD */
 		>;
+		bootph-all;
 	};
 
 	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
@@ -313,6 +315,7 @@
 			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */
 			J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */
 		>;
+		bootph-all;
 	};
 
 	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
@@ -372,6 +375,7 @@
 			J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C24) WKUP_GPIO0_13.MCU_UART0_RXD */
 			J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */
 		>;
+		bootph-all;
 	};
 
 	mcu_rpi_header_gpio0_pins0_default: mcu-rpi-header-gpio0-default-pins-0 {
@@ -413,6 +417,7 @@
 	status = "reserved";
 	pinctrl-names = "default";
 	pinctrl-0 = <&wkup_uart0_pins_default>;
+	bootph-all;
 };
 
 &wkup_i2c0 {
@@ -495,6 +500,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_uart0_pins_default>;
+	bootph-all;
 };
 
 &main_uart8 {
@@ -503,6 +509,7 @@
 	pinctrl-0 = <&main_uart8_pins_default>;
 	/* Shared with TFA on this platform */
 	power-domains = <&k3_pds 357 TI_SCI_PD_SHARED>;
+	bootph-all;
 };
 
 &main_i2c0 {
@@ -597,6 +604,7 @@
 	disable-wp;
 	vmmc-supply = <&vdd_mmc1>;
 	vqmmc-supply = <&vdd_sd_dv>;
+	bootph-all;
 };
 
 &mcu_cpsw {
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
index 5bc0d2fb4b8f3..4ca2d4e2fb9b0 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
@@ -156,6 +156,7 @@
 			J721S2_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (H24) WKUP_I2C0_SCL */
 			J721S2_WKUP_IOPAD(0x09c, PIN_INPUT, 0) /* (H27) WKUP_I2C0_SDA */
 		>;
+		bootph-all;
 	};
 };
 
@@ -169,6 +170,7 @@
 		/* AT24C512C-MAHM-T */
 		compatible = "atmel,24c512";
 		reg = <0x51>;
+		bootph-all;
 	};
 };
 
@@ -190,7 +192,6 @@
 		cdns,read-delay = <4>;
 
 		partitions {
-			bootph-all;
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -226,9 +227,9 @@
 			};
 
 			partition@3fc0000 {
-				bootph-pre-ram;
 				label = "ospi.phypattern";
 				reg = <0x3fc0000 0x40000>;
+				bootph-all;
 			};
 		};
 	};