From: hno <> Date: Mon, 27 Dec 2004 19:08:30 +0000 (+0000) Subject: Bootstrapped X-Git-Tag: SQUID_3_0_PRE4~932 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=7e1c9550f4d1a13a9ebf72beb3069dd888bd14c5;p=thirdparty%2Fsquid.git Bootstrapped --- diff --git a/aclocal.m4 b/aclocal.m4 index 63f06ada83..dcaf38a466 100644 --- a/aclocal.m4 +++ b/aclocal.m4 @@ -1012,1167 +1012,344 @@ if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then fi ]) +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -# serial 40 AC_PROG_LIBTOOL -AC_DEFUN(AC_PROG_LIBTOOL, -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl +# serial 47 AC_PROG_LIBTOOL + + +# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) +# ----------------------------------------------------------- +# If this macro is not defined by Autoconf, define it here. +m4_ifdef([AC_PROVIDE_IFELSE], + [], + [m4_define([AC_PROVIDE_IFELSE], + [m4_ifdef([AC_PROVIDE_$1], + [$2], [$3])])]) + + +# AC_PROG_LIBTOOL +# --------------- +AC_DEFUN([AC_PROG_LIBTOOL], +[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl +dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX +dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. + AC_PROVIDE_IFELSE([AC_PROG_CXX], + [AC_LIBTOOL_CXX], + [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX + ])]) +dnl And a similar setup for Fortran 77 support + AC_PROVIDE_IFELSE([AC_PROG_F77], + [AC_LIBTOOL_F77], + [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 +])]) -# Save cache, so that ltconfig can load it -AC_CACHE_SAVE +dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. +dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run +dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. + AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [ifdef([AC_PROG_GCJ], + [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([A][M_PROG_GCJ], + [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([LT_AC_PROG_GCJ], + [define([LT_AC_PROG_GCJ], + defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) +])])# AC_PROG_LIBTOOL -# Actually configure libtool. ac_aux_dir is where install-sh is found. -CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ -LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ -DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ -${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ -|| AC_MSG_ERROR([libtool configure failed]) -# Reload cache, that may have been modified by ltconfig -AC_CACHE_LOAD +# _AC_PROG_LIBTOOL +# ---------------- +AC_DEFUN([_AC_PROG_LIBTOOL], +[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl +AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl +AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl +AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl # This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" +LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl -# Redirect the config.log output again, so that the ltconfig log is not -# clobbered by the next message. -exec 5>>./config.log -]) +# Prevent multiple expansion +define([AC_PROG_LIBTOOL], []) +])# _AC_PROG_LIBTOOL + -AC_DEFUN(AC_LIBTOOL_SETUP, -[AC_PREREQ(2.13)dnl +# AC_LIBTOOL_SETUP +# ---------------- +AC_DEFUN([AC_LIBTOOL_SETUP], +[AC_PREREQ(2.50)dnl AC_REQUIRE([AC_ENABLE_SHARED])dnl AC_REQUIRE([AC_ENABLE_STATIC])dnl AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_LD])dnl +AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl AC_REQUIRE([AC_PROG_NM])dnl + AC_REQUIRE([AC_PROG_LN_S])dnl +AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl +# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! +AC_REQUIRE([AC_OBJEXT])dnl +AC_REQUIRE([AC_EXEEXT])dnl dnl -case "$target" in -NONE) lt_target="$host" ;; -*) lt_target="$target" ;; -esac +AC_LIBTOOL_SYS_MAX_CMD_LEN +AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +AC_LIBTOOL_OBJDIR -# Check for any special flags to pass to ltconfig. -libtool_flags="--cache-file=$cache_file" -test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" -test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" -test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" -test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" -test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" -ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], -[libtool_flags="$libtool_flags --enable-dlopen"]) -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[libtool_flags="$libtool_flags --enable-win32-dll"]) -AC_ARG_ENABLE(libtool-lock, - [ --disable-libtool-lock avoid locking (might break parallel builds)]) -test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" -test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" +AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +_LT_AC_PROG_ECHO_BACKSLASH -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case "$lt_target" in -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case "`/usr/bin/file conftest.o`" in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES fi - rm -rf conftest* ;; +esac -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e s/^X//' +[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw*) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - ;; -]) -esac -]) +# Same as above, but do not quote variable references. +[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] -# AC_LIBTOOL_DLOPEN - enable checks for dlopen support -AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) - -# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's -AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) - -# AC_ENABLE_SHARED - implement the --enable-shared flag -# Usage: AC_ENABLE_SHARED[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_SHARED, [dnl -define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(shared, -changequote(<<, >>)dnl -<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl -]) +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' -# AC_DISABLE_SHARED - set the default shared flag to --disable-shared -AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no)]) - -# AC_ENABLE_STATIC - implement the --enable-static flag -# Usage: AC_ENABLE_STATIC[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_STATIC, [dnl -define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(static, -changequote(<<, >>)dnl -<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_static=AC_ENABLE_STATIC_DEFAULT)dnl -]) +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' -# AC_DISABLE_STATIC - set the default static flag to --disable-static -AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no)]) - - -# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag -# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl -define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(fast-install, -changequote(<<, >>)dnl -<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl -]) +# Constants: +rm="rm -f" -# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install -AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no)]) +# Global variables: +default_ofile=libtool +can_build_shared=yes -# AC_PROG_LD - find the path to the GNU or non-GNU linker -AC_DEFUN(AC_PROG_LD, -[AC_ARG_WITH(gnu-ld, -[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], -test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -ac_prog=ld -if test "$ac_cv_prog_gcc" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - ac_prog=`($CC -print-prog-name=ld) 2>&5` - case "$ac_prog" in - # Accept absolute paths. -changequote(,)dnl - [\\/]* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' -changequote([,])dnl - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld +# All known linkers require a `.a' archive for static linking (except M$VC, +# which needs '.lib'). +libext=a +ltmain="$ac_aux_dir/ltmain.sh" +ofile="$default_ofile" +with_gnu_ld="$lt_cv_prog_gnu_ld" + +AC_CHECK_TOOL(AR, ar, false) +AC_CHECK_TOOL(RANLIB, ranlib, :) +AC_CHECK_TOOL(STRIP, strip, :) + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AS" && AS=as +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LD" && LD=ld +test -z "$LN_S" && LN_S="ln -s" +test -z "$MAGIC_CMD" && MAGIC_CMD=file +test -z "$NM" && NM=nm +test -z "$SED" && SED=sed +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$RANLIB" && RANLIB=: +test -z "$STRIP" && STRIP=: +test -z "$ac_objext" && ac_objext=o + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" ;; *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown + old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" ;; esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(ac_cv_path_LD, -[if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - ac_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" -else - ac_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$ac_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) -else - AC_MSG_RESULT(no) + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_PROG_LD_GNU -]) -AC_DEFUN(AC_PROG_LD_GNU, -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - ac_cv_prog_gnu_ld=yes -else - ac_cv_prog_gnu_ld=no -fi]) -]) +cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` -# AC_PROG_NM - find the path to a BSD-compatible name lister -AC_DEFUN(AC_PROG_NM, -[AC_MSG_CHECKING([for BSD-compatible nm]) -AC_CACHE_VAL(ac_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - ac_cv_path_NM="$NM" -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" - break - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" - break - else - ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm -fi]) -NM="$ac_cv_path_NM" -AC_MSG_RESULT([$NM]) -]) - -# AC_CHECK_LIBM - check for math library -AC_DEFUN(AC_CHECK_LIBM, -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case "$lt_target" in -*-*-beos* | *-*-cygwin*) - # These system don't have libm - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, main, LIBM="-lm") +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + AC_PATH_MAGIC + fi ;; esac -]) -# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl convenience library and INCLTDL to the include flags for -# the libltdl header and adds --enable-ltdl-convenience to the -# configure arguments. Note that LIBLTDL and INCLTDL are not -# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not -# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed -# with '${top_builddir}/' and INCLTDL will be prefixed with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case "$enable_ltdl_convenience" in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; - esac - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) -]) - -# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl installable library and INCLTDL to the include flags for -# the libltdl header and adds --enable-ltdl-install to the configure -# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is -# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed -# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will -# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed -# with '${top_srcdir}/' (note the single quotes!). If your package is -# not flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, main, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - INCLTDL= - fi -]) +AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) +AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +enable_win32_dll=yes, enable_win32_dll=no) -dnl old names -AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl -AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl -AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl -AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl -AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl -AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl -AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl +AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes -dnl This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL])dnl +AC_ARG_WITH([pic], + [AC_HELP_STRING([--with-pic], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [pic_mode="$withval"], + [pic_mode=default]) +test -z "$pic_mode" && pic_mode=default +# Use C for the default configuration in the libtool script +tagname= +AC_LIBTOOL_LANG_C_CONFIG +_LT_AC_TAGCONFIG +])# AC_LIBTOOL_SETUP -# serial 6 AC_LIB_LTDL -# AC_WITH_LTDL -# ------------ -# Clients of libltdl can use this macro to allow the installer to -# choose between a shipped copy of the ltdl sources or a preinstalled -# version of the library. -AC_DEFUN([AC_WITH_LTDL], -[AC_REQUIRE([AC_LIB_LTDL]) -AC_SUBST([LIBLTDL]) -AC_SUBST([INCLTDL]) +# _LT_AC_SYS_COMPILER +# ------------------- +AC_DEFUN([_LT_AC_SYS_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl -# Unless the user asks us to check, assume no installed ltdl exists. -use_installed_libltdl=no +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} -AC_ARG_WITH([included_ltdl], - [ --with-included-ltdl use the GNU ltdl sources included here]) +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_AC_SYS_COMPILER -if test "x$with_included_ltdl" != xyes; then - # We are not being forced to use the included libltdl sources, so - # decide whether there is a useful installed version we can use. - AC_CHECK_HEADER([ltdl.h], - [AC_CHECK_LIB([ltdl], [lt_dlcaller_register], - [with_included_ltdl=no], - [with_included_ltdl=yes]) - ]) -fi -if test "x$enable_ltdl_install" != xyes; then - # If the user did not specify an installable libltdl, then default - # to a convenience lib. - AC_LIBLTDL_CONVENIENCE -fi +# _LT_AC_SYS_LIBPATH_AIX +# ---------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], +[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi],[]) +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +])# _LT_AC_SYS_LIBPATH_AIX -if test "x$with_included_ltdl" = xno; then - # If the included ltdl is not to be used. then Use the - # preinstalled libltdl we found. - AC_DEFINE([HAVE_LTDL], 1, - [Define this if a modern libltdl is already installed]) - LIBLTDL=-lltdl -fi -# Report our decision... -AC_MSG_CHECKING([whether to use included libltdl]) -AC_MSG_RESULT([$with_included_ltdl]) +# _LT_AC_SHELL_INIT(ARG) +# ---------------------- +AC_DEFUN([_LT_AC_SHELL_INIT], +[ifdef([AC_DIVERSION_NOTICE], + [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], + [AC_DIVERT_PUSH(NOTICE)]) +$1 +AC_DIVERT_POP +])# _LT_AC_SHELL_INIT -AC_CONFIG_SUBDIRS([libltdl]) -])# AC_WITH_LTDL +# _LT_AC_PROG_ECHO_BACKSLASH +# -------------------------- +# Add some code to the start of the generated configure script which +# will find an echo command which doesn't interpret backslashes. +AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], +[_LT_AC_SHELL_INIT([ +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} -# AC_LIB_LTDL -# ----------- -# Perform all the checks necessary for compilation of the ltdl objects -# -- including compiler checks and header checks. -AC_DEFUN([AC_LIB_LTDL], -[AC_PREREQ(2.50) -AC_REQUIRE([AC_PROG_CC]) -AC_REQUIRE([AC_C_CONST]) -AC_REQUIRE([AC_HEADER_STDC]) -AC_REQUIRE([AC_HEADER_DIRENT]) -AC_REQUIRE([_LT_AC_CHECK_DLFCN]) -AC_REQUIRE([AC_LTDL_ENABLE_INSTALL]) -AC_REQUIRE([AC_LTDL_SHLIBEXT]) -AC_REQUIRE([AC_LTDL_SHLIBPATH]) -AC_REQUIRE([AC_LTDL_SYSSEARCHPATH]) -AC_REQUIRE([AC_LTDL_OBJDIR]) -AC_REQUIRE([AC_LTDL_DLPREOPEN]) -AC_REQUIRE([AC_LTDL_DLLIB]) -AC_REQUIRE([AC_LTDL_SYMBOL_USCORE]) -AC_REQUIRE([AC_LTDL_DLSYM_USCORE]) -AC_REQUIRE([AC_LTDL_SYS_DLOPEN_DEPLIBS]) -AC_REQUIRE([AC_LTDL_FUNC_ARGZ]) +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` + ;; +esac -AC_CHECK_HEADERS([assert.h ctype.h errno.h malloc.h memory.h stdlib.h \ - stdio.h unistd.h]) -AC_CHECK_HEADERS([dl.h sys/dl.h dld.h mach-o/dyld.h]) -AC_CHECK_HEADERS([string.h strings.h], [break]) +echo=${ECHO-echo} +if test "X[$]1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X[$]1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} +fi -AC_CHECK_FUNCS([strchr index], [break]) -AC_CHECK_FUNCS([strrchr rindex], [break]) -AC_CHECK_FUNCS([memcpy bcopy], [break]) -AC_CHECK_FUNCS([memmove strcmp]) -AC_CHECK_FUNCS([closedir opendir readdir]) -])# AC_LIB_LTDL +if test "X[$]1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null 2>&1 && unset CDPATH -# AC_LTDL_ENABLE_INSTALL -# ---------------------- -AC_DEFUN([AC_LTDL_ENABLE_INSTALL], -[AC_ARG_ENABLE([ltdl-install], - [AC_HELP_STRING([--enable-ltdl-install], [install libltdl])]) +if test -z "$ECHO"; then +if test "X${echo_test_string+set}" != Xset; then +# find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if (echo_test_string="`eval $cmd`") 2>/dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi -AM_CONDITIONAL(INSTALL_LTDL, test x"${enable_ltdl_install-no}" != xno) -AM_CONDITIONAL(CONVENIENCE_LTDL, test x"${enable_ltdl_convenience-no}" != xno) -])])# AC_LTDL_ENABLE_INSTALL +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. - -# AC_LTDL_SYS_DLOPEN_DEPLIBS -# -------------------------- -AC_DEFUN([AC_LTDL_SYS_DLOPEN_DEPLIBS], -[AC_REQUIRE([AC_CANONICAL_HOST]) -AC_CACHE_CHECK([whether deplibs are loaded by dlopen], - [libltdl_cv_sys_dlopen_deplibs], - [# PORTME does your system automatically load deplibs for dlopen? - # or its logical equivalent (e.g. shl_load for HP-UX < 11) - # For now, we just catch OSes we know something about -- in the - # future, we'll try test this programmatically. - libltdl_cv_sys_dlopen_deplibs=unknown - case "$host_os" in - aix3*|aix4.1.*|aix4.2.*) - # Unknown whether this is true for these versions of AIX, but - # we want this `case' here to explicitly catch those versions. - libltdl_cv_sys_dlopen_deplibs=unknown - ;; - aix[[45]]*) - libltdl_cv_sys_dlopen_deplibs=yes - ;; - darwin*) - # Assuming the user has installed a libdl from somewhere, this is true - # If you are looking for one http://www.opendarwin.org/projects/dlcompat - libltdl_cv_sys_dlopen_deplibs=yes - ;; - gnu* | linux* | kfreebsd*-gnu | knetbsd*-gnu) - # GNU and its variants, using gnu ld.so (Glibc) - libltdl_cv_sys_dlopen_deplibs=yes - ;; - hpux10*|hpux11*) - libltdl_cv_sys_dlopen_deplibs=yes - ;; - irix[[12345]]*|irix6.[[01]]*) - # Catch all versions of IRIX before 6.2, and indicate that we don't - # know how it worked for any of those versions. - libltdl_cv_sys_dlopen_deplibs=unknown - ;; - irix*) - # The case above catches anything before 6.2, and it's known that - # at 6.2 and later dlopen does load deplibs. - libltdl_cv_sys_dlopen_deplibs=yes - ;; - netbsd*) - libltdl_cv_sys_dlopen_deplibs=yes - ;; - openbsd*) - libltdl_cv_sys_dlopen_deplibs=yes - ;; - osf[[1234]]*) - # dlopen did load deplibs (at least at 4.x), but until the 5.x series, - # it did *not* use an RPATH in a shared library to find objects the - # library depends on, so we explictly say `no'. - libltdl_cv_sys_dlopen_deplibs=no - ;; - osf5.0|osf5.0a|osf5.1) - # dlopen *does* load deplibs and with the right loader patch applied - # it even uses RPATH in a shared library to search for shared objects - # that the library depends on, but there's no easy way to know if that - # patch is installed. Since this is the case, all we can really - # say is unknown -- it depends on the patch being installed. If - # it is, this changes to `yes'. Without it, it would be `no'. - libltdl_cv_sys_dlopen_deplibs=unknown - ;; - osf*) - # the two cases above should catch all versions of osf <= 5.1. Read - # the comments above for what we know about them. - # At > 5.1, deplibs are loaded *and* any RPATH in a shared library - # is used to find them so we can finally say `yes'. - libltdl_cv_sys_dlopen_deplibs=yes - ;; - solaris*) - libltdl_cv_sys_dlopen_deplibs=yes - ;; - esac - ]) -if test "$libltdl_cv_sys_dlopen_deplibs" != yes; then - AC_DEFINE([LTDL_DLOPEN_DEPLIBS], [1], - [Define if the OS needs help to load dependent libraries for dlopen().]) -fi -])# AC_LTDL_SYS_DLOPEN_DEPLIBS - - -# AC_LTDL_SHLIBEXT -# ---------------- -AC_DEFUN([AC_LTDL_SHLIBEXT], -[AC_REQUIRE([AC_LIBTOOL_SYS_DYNAMIC_LINKER]) -AC_CACHE_CHECK([which extension is used for loadable modules], - [libltdl_cv_shlibext], -[ -module=yes -eval libltdl_cv_shlibext=$shrext_cmds - ]) -if test -n "$libltdl_cv_shlibext"; then - AC_DEFINE_UNQUOTED(LTDL_SHLIB_EXT, "$libltdl_cv_shlibext", - [Define to the extension used for shared libraries, say, ".so".]) -fi -])# AC_LTDL_SHLIBEXT - - -# AC_LTDL_SHLIBPATH -# ----------------- -AC_DEFUN([AC_LTDL_SHLIBPATH], -[AC_REQUIRE([AC_LIBTOOL_SYS_DYNAMIC_LINKER]) -AC_CACHE_CHECK([which variable specifies run-time library path], - [libltdl_cv_shlibpath_var], [libltdl_cv_shlibpath_var="$shlibpath_var"]) -if test -n "$libltdl_cv_shlibpath_var"; then - AC_DEFINE_UNQUOTED(LTDL_SHLIBPATH_VAR, "$libltdl_cv_shlibpath_var", - [Define to the name of the environment variable that determines the dynamic library search path.]) -fi -])# AC_LTDL_SHLIBPATH - - -# AC_LTDL_SYSSEARCHPATH -# --------------------- -AC_DEFUN([AC_LTDL_SYSSEARCHPATH], -[AC_REQUIRE([AC_LIBTOOL_SYS_DYNAMIC_LINKER]) -AC_CACHE_CHECK([for the default library search path], - [libltdl_cv_sys_search_path], - [libltdl_cv_sys_search_path="$sys_lib_dlsearch_path_spec"]) -if test -n "$libltdl_cv_sys_search_path"; then - sys_search_path= - for dir in $libltdl_cv_sys_search_path; do - if test -z "$sys_search_path"; then - sys_search_path="$dir" - else - sys_search_path="$sys_search_path$PATH_SEPARATOR$dir" - fi - done - AC_DEFINE_UNQUOTED(LTDL_SYSSEARCHPATH, "$sys_search_path", - [Define to the system default library search path.]) -fi -])# AC_LTDL_SYSSEARCHPATH - - -# AC_LTDL_OBJDIR -# -------------- -AC_DEFUN([AC_LTDL_OBJDIR], -[AC_CACHE_CHECK([for objdir], - [libltdl_cv_objdir], - [libltdl_cv_objdir="$objdir" - if test -n "$objdir"; then - : - else - rm -f .libs 2>/dev/null - mkdir .libs 2>/dev/null - if test -d .libs; then - libltdl_cv_objdir=.libs - else - # MS-DOS does not allow filenames that begin with a dot. - libltdl_cv_objdir=_libs - fi - rmdir .libs 2>/dev/null - fi - ]) -AC_DEFINE_UNQUOTED(LTDL_OBJDIR, "$libltdl_cv_objdir/", - [Define to the sub-directory in which libtool stores uninstalled libraries.]) -])# AC_LTDL_OBJDIR - - -# AC_LTDL_DLPREOPEN -# ----------------- -AC_DEFUN([AC_LTDL_DLPREOPEN], -[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE]) -AC_CACHE_CHECK([whether libtool supports -dlopen/-dlpreopen], - [libltdl_cv_preloaded_symbols], - [if test -n "$lt_cv_sys_global_symbol_pipe"; then - libltdl_cv_preloaded_symbols=yes - else - libltdl_cv_preloaded_symbols=no - fi - ]) -if test x"$libltdl_cv_preloaded_symbols" = xyes; then - AC_DEFINE(HAVE_PRELOADED_SYMBOLS, 1, - [Define if libtool can extract symbol lists from object files.]) -fi -])# AC_LTDL_DLPREOPEN - - -# AC_LTDL_DLLIB -# ------------- -AC_DEFUN([AC_LTDL_DLLIB], -[LIBADD_DL= -AC_SUBST(LIBADD_DL) -AC_LANG_PUSH([C]) - -AC_CHECK_FUNC([shl_load], - [AC_DEFINE([HAVE_SHL_LOAD], [1], - [Define if you have the shl_load function.])], - [AC_CHECK_LIB([dld], [shl_load], - [AC_DEFINE([HAVE_SHL_LOAD], [1], - [Define if you have the shl_load function.]) - LIBADD_DL="$LIBADD_DL -ldld"], - [AC_CHECK_LIB([dl], [dlopen], - [AC_DEFINE([HAVE_LIBDL], [1], - [Define if you have the libdl library or equivalent.]) - LIBADD_DL="-ldl" libltdl_cv_lib_dl_dlopen="yes"], - [AC_TRY_LINK([#if HAVE_DLFCN_H -# include -#endif - ], - [dlopen(0, 0);], - [AC_DEFINE([HAVE_LIBDL], [1], - [Define if you have the libdl library or equivalent.]) libltdl_cv_func_dlopen="yes"], - [AC_CHECK_LIB([svld], [dlopen], - [AC_DEFINE([HAVE_LIBDL], [1], - [Define if you have the libdl library or equivalent.]) - LIBADD_DL="-lsvld" libltdl_cv_func_dlopen="yes"], - [AC_CHECK_LIB([dld], [dld_link], - [AC_DEFINE([HAVE_DLD], [1], - [Define if you have the GNU dld library.]) - LIBADD_DL="$LIBADD_DL -ldld"], - [AC_CHECK_FUNC([_dyld_func_lookup], - [AC_DEFINE([HAVE_DYLD], [1], - [Define if you have the _dyld_func_lookup function.])]) - ]) - ]) - ]) - ]) - ]) -]) - -if test x"$libltdl_cv_func_dlopen" = xyes || test x"$libltdl_cv_lib_dl_dlopen" = xyes -then - lt_save_LIBS="$LIBS" - LIBS="$LIBS $LIBADD_DL" - AC_CHECK_FUNCS([dlerror]) - LIBS="$lt_save_LIBS" -fi -AC_LANG_POP -])# AC_LTDL_DLLIB - - -# AC_LTDL_SYMBOL_USCORE -# --------------------- -# does the compiler prefix global symbols with an underscore? -AC_DEFUN([AC_LTDL_SYMBOL_USCORE], -[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE]) -AC_CACHE_CHECK([for _ prefix in compiled symbols], - [ac_cv_sys_symbol_underscore], - [ac_cv_sys_symbol_underscore=no - cat > conftest.$ac_ext < $ac_nlist) && test -s "$ac_nlist"; then - # See whether the symbols have a leading underscore. - if grep '^. _nm_test_func' "$ac_nlist" >/dev/null; then - ac_cv_sys_symbol_underscore=yes - else - if grep '^. nm_test_func ' "$ac_nlist" >/dev/null; then - : - else - echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC - fi - fi - else - echo "configure: cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC - fi - else - echo "configure: failed program was:" >&AC_FD_CC - cat conftest.c >&AC_FD_CC - fi - rm -rf conftest* - ]) -])# AC_LTDL_SYMBOL_USCORE - - -# AC_LTDL_DLSYM_USCORE -# -------------------- -AC_DEFUN([AC_LTDL_DLSYM_USCORE], -[AC_REQUIRE([AC_LTDL_SYMBOL_USCORE]) -if test x"$ac_cv_sys_symbol_underscore" = xyes; then - if test x"$libltdl_cv_func_dlopen" = xyes || - test x"$libltdl_cv_lib_dl_dlopen" = xyes ; then - AC_CACHE_CHECK([whether we have to add an underscore for dlsym], - [libltdl_cv_need_uscore], - [libltdl_cv_need_uscore=unknown - save_LIBS="$LIBS" - LIBS="$LIBS $LIBADD_DL" - _LT_AC_TRY_DLOPEN_SELF( - [libltdl_cv_need_uscore=no], [libltdl_cv_need_uscore=yes], - [], [libltdl_cv_need_uscore=cross]) - LIBS="$save_LIBS" - ]) - fi -fi - -if test x"$libltdl_cv_need_uscore" = xyes; then - AC_DEFINE(NEED_USCORE, 1, - [Define if dlsym() requires a leading underscore in symbol names.]) -fi -])# AC_LTDL_DLSYM_USCORE - -# AC_LTDL_FUNC_ARGZ -# ----------------- -AC_DEFUN([AC_LTDL_FUNC_ARGZ], -[AC_CHECK_HEADERS([argz.h]) - -AC_CHECK_TYPES([error_t], - [], - [AC_DEFINE([error_t], [int], - [Define to a type to use for `error_t' if it is not otherwise available.])], - [#if HAVE_ARGZ_H -# include -#endif]) - -AC_CHECK_FUNCS([argz_append argz_create_sep argz_insert argz_next argz_stringify]) -])# AC_LTDL_FUNC_ARGZ - -# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- - -# serial 47 AC_PROG_LIBTOOL - - -# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) -# ----------------------------------------------------------- -# If this macro is not defined by Autoconf, define it here. -m4_ifdef([AC_PROVIDE_IFELSE], - [], - [m4_define([AC_PROVIDE_IFELSE], - [m4_ifdef([AC_PROVIDE_$1], - [$2], [$3])])]) - - -# AC_PROG_LIBTOOL -# --------------- -AC_DEFUN([AC_PROG_LIBTOOL], -[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl -dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX -dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. - AC_PROVIDE_IFELSE([AC_PROG_CXX], - [AC_LIBTOOL_CXX], - [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX - ])]) -dnl And a similar setup for Fortran 77 support - AC_PROVIDE_IFELSE([AC_PROG_F77], - [AC_LIBTOOL_F77], - [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 -])]) - -dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. -dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run -dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. - AC_PROVIDE_IFELSE([AC_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [ifdef([AC_PROG_GCJ], - [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) - ifdef([A][M_PROG_GCJ], - [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) - ifdef([LT_AC_PROG_GCJ], - [define([LT_AC_PROG_GCJ], - defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) -])])# AC_PROG_LIBTOOL - - -# _AC_PROG_LIBTOOL -# ---------------- -AC_DEFUN([_AC_PROG_LIBTOOL], -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl -AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl -AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl -AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl - -# Prevent multiple expansion -define([AC_PROG_LIBTOOL], []) -])# _AC_PROG_LIBTOOL - - -# AC_LIBTOOL_SETUP -# ---------------- -AC_DEFUN([AC_LIBTOOL_SETUP], -[AC_PREREQ(2.50)dnl -AC_REQUIRE([AC_ENABLE_SHARED])dnl -AC_REQUIRE([AC_ENABLE_STATIC])dnl -AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_LD])dnl -AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl -AC_REQUIRE([AC_PROG_NM])dnl - -AC_REQUIRE([AC_PROG_LN_S])dnl -AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl -# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! -AC_REQUIRE([AC_OBJEXT])dnl -AC_REQUIRE([AC_EXEEXT])dnl -dnl - -AC_LIBTOOL_SYS_MAX_CMD_LEN -AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -AC_LIBTOOL_OBJDIR - -AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -_LT_AC_PROG_ECHO_BACKSLASH - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] - -# Same as above, but do not quote variable references. -[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -# Constants: -rm="rm -f" - -# Global variables: -default_ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except M$VC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" - -AC_CHECK_TOOL(AR, ar, false) -AC_CHECK_TOOL(RANLIB, ranlib, :) -AC_CHECK_TOOL(STRIP, strip, :) - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$SED" && SED=sed -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" - ;; - *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` - -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - AC_PATH_MAGIC - fi - ;; -esac - -AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) -AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], -enable_win32_dll=yes, enable_win32_dll=no) - -AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -AC_ARG_WITH([pic], - [AC_HELP_STRING([--with-pic], - [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], - [pic_mode="$withval"], - [pic_mode=default]) -test -z "$pic_mode" && pic_mode=default - -# Use C for the default configuration in the libtool script -tagname= -AC_LIBTOOL_LANG_C_CONFIG -_LT_AC_TAGCONFIG -])# AC_LIBTOOL_SETUP - - -# _LT_AC_SYS_COMPILER -# ------------------- -AC_DEFUN([_LT_AC_SYS_COMPILER], -[AC_REQUIRE([AC_PROG_CC])dnl - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# Allow CC to be a program name with arguments. -compiler=$CC -])# _LT_AC_SYS_COMPILER - - -# _LT_AC_SYS_LIBPATH_AIX -# ---------------------- -# Links a minimal program and checks the executable -# for the system default hardcoded library path. In most cases, -# this is /usr/lib:/lib, but when the MPI compilers are used -# the location of the communication and MPI libs are included too. -# If we don't find anything, use the default library path according -# to the aix ld manual. -AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], -[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi],[]) -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -])# _LT_AC_SYS_LIBPATH_AIX - - -# _LT_AC_SHELL_INIT(ARG) -# ---------------------- -AC_DEFUN([_LT_AC_SHELL_INIT], -[ifdef([AC_DIVERSION_NOTICE], - [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], - [AC_DIVERT_PUSH(NOTICE)]) -$1 -AC_DIVERT_POP -])# _LT_AC_SHELL_INIT - - -# _LT_AC_PROG_ECHO_BACKSLASH -# -------------------------- -# Add some code to the start of the generated configure script which -# will find an echo command which doesn't interpret backslashes. -AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], -[_LT_AC_SHELL_INIT([ -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` - ;; -esac - -echo=${ECHO-echo} -if test "X[$]1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X[$]1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} -fi - -if test "X[$]1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null 2>&1 && unset CDPATH - -if test -z "$ECHO"; then -if test "X${echo_test_string+set}" != Xset; then -# find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string="`eval $cmd`") 2>/dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" if test "X$echo" = Xecho; then # We didn't find a better echo, so look for alternatives. @@ -6624,1179 +5801,1589 @@ AC_MSG_CHECKING([for $compiler option to produce PIC]) ;; esac fi -], -[ - if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' +], +[ + if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case "$cc_basename" in + xlc*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + esac + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + newsos6) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + linux*) + case $CC in + icc* | ecc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + ccc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + esac + ;; + + osf3* | osf4* | osf5*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + sco3.2v5*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' + ;; + + solaris*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sunos4*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + uts4*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then + AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], + _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), + [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +case "$host_os" in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" + ;; +esac +]) + + +# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) +# ------------------------------------ +# See if the linker supports building shared libraries. +AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], +[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +ifelse([$1],[CXX],[ + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in + aix4* | aix5*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + else + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; + *) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac +],[ + runpath_var= + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)= + _LT_AC_TAGVAR(archive_expsym_cmds, $1)= + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= + _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown + _LT_AC_TAGVAR(hardcode_automatic, $1)=no + _LT_AC_TAGVAR(module_cmds, $1)= + _LT_AC_TAGVAR(module_expsym_cmds, $1)= + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_AC_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + # See if GNU ld supports shared libraries. case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF fi ;; amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + ld_shlibs=no + fi ;; - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - enable_shared=no + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi ;; - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + solaris* | sysv5*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case "$host_cpu" in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac + sunos4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds" + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + if test $supports_anon_versioning = yes; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ +cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +$echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + else + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="$tmp_archive_cmds" + fi + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi ;; esac + + if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + fi else - # PORTME Check for flag to pass linker flags through the system compiler. + # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in - aix*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + aix3*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix4* | aix5*) if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" else - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + else + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' fi - ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case "$cc_basename" in - xlc*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; - esac - ;; - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - hpux9* | hpux10* | hpux11*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case "$host_cpu" in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - ;; + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - irix5* | irix6* | nonstopux*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC (with -KPIC) is the default. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi - newsos6) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds it's shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi ;; - linux*) - case $CC in - icc* | ecc*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - ccc*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All Alpha code is PIC. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - esac + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + # see comment about different semantics on the GNU ld section + _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - osf3* | osf4* | osf5*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All OSF/1 code is PIC. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + bsdi[[45]]*) + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; - sco3.2v5*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; - solaris*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + darwin* | rhapsody*) + case "$host_os" in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case "$cc_basename" in + xlc*) + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi ;; - sunos4*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + dgux*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + freebsd1*) + _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - sysv4*MP*) - if test -d /usr/nec ;then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; - uts4*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | kfreebsd*-gnu) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; - esac - fi -]) -AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then - AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], - _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), - [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], - [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in - "" | " "*) ;; - *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; - esac], - [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) -fi -case "$host_os" in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" - ;; -esac -]) - - -# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) -# ------------------------------------ -# See if the linker supports building shared libraries. -AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], -[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -ifelse([$1],[CXX],[ - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - case $host_os in - aix4* | aix5*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" - ;; - cygwin* | mingw*) - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' - ;; - *) - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac -],[ - runpath_var= - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no - _LT_AC_TAGVAR(archive_cmds, $1)= - _LT_AC_TAGVAR(archive_expsym_cmds, $1)= - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_minus_L, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown - _LT_AC_TAGVAR(hardcode_automatic, $1)=no - _LT_AC_TAGVAR(module_cmds, $1)= - _LT_AC_TAGVAR(module_expsym_cmds, $1)= - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - _LT_AC_TAGVAR(include_expsyms, $1)= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. -EOF + hpux9*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi - ;; + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes - amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - _LT_AC_TAGVAR(ld_shlibs, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + hpux10* | hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac else - _LT_AC_TAGVAR(ld_shlibs, $1)=no + case "$host_cpu" in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + ;; + esac fi - ;; + if test "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + ;; + *) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - else - ld_shlibs=no + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac fi ;; - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; - solaris* | sysv5*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else - _LT_AC_TAGVAR(ld_shlibs, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; - sunos4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= + newsos6) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; - linux*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds" - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - if test $supports_anon_versioning = yes; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ -cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ -$echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - else - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="$tmp_archive_cmds" - fi - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' else - _LT_AC_TAGVAR(ld_shlibs, $1)=no + case $host_os in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac fi ;; - esac - if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. + os2*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - fi + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" + osf3*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - esac + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' + # Both c and cxx compiler support -rpath directly + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' fi + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_AC_TAGVAR(archive_cmds, $1)='' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + sco3.2v5*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ;; + solaris*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - else - # We have old collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds it's shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; - amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - # see comment about different semantics on the GNU ld section - _LT_AC_TAGVAR(ld_shlibs, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; - bsdi[[45]]*) - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + sysv4) + case $host_vendor in + sni) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + sysv4.3*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ;; - darwin* | rhapsody*) - case "$host_os" in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - if test "$GCC" = yes ; then - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - case "$cc_basename" in - xlc*) - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - fi + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4.2uw2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; + + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + runpath_var='LD_RUN_PATH' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv5*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' ;; - dgux*) + uts4*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; - freebsd1*) + *) _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +# +# Do we need to explicitly link libc? +# +case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_AC_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_MSG_CHECKING([whether -lc should be explicitly linked in]) + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | kfreebsd*-gnu) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) + then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + else + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) ;; + esac + fi + ;; +esac +])# AC_LIBTOOL_PROG_LD_SHLIBS + + +# _LT_AC_FILE_LTDLL_C +# ------------------- +# Be careful that the start marker always follows a newline. +AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ +# /* ltdll.c starts here */ +# #define WIN32_LEAN_AND_MEAN +# #include +# #undef WIN32_LEAN_AND_MEAN +# #include +# +# #ifndef __CYGWIN__ +# # ifdef __CYGWIN32__ +# # define __CYGWIN__ __CYGWIN32__ +# # endif +# #endif +# +# #ifdef __cplusplus +# extern "C" { +# #endif +# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +# #ifdef __cplusplus +# } +# #endif +# +# #ifdef __CYGWIN__ +# #include +# DECLARE_CYGWIN_DLL( DllMain ); +# #endif +# HINSTANCE __hDllInstance_base; +# +# BOOL APIENTRY +# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +# { +# __hDllInstance_base = hInst; +# return TRUE; +# } +# /* ltdll.c ends here */ +])# _LT_AC_FILE_LTDLL_C + + +# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) +# --------------------------------- +AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) + + +# old names +AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) +AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) +AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) +AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) +AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) + +# This is just to silence aclocal about the macro not being used +ifelse([AC_DISABLE_FAST_INSTALL]) + +AC_DEFUN([LT_AC_PROG_GCJ], +[AC_CHECK_TOOL(GCJ, gcj, no) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS) +]) + +AC_DEFUN([LT_AC_PROG_RC], +[AC_CHECK_TOOL(RC, windres, no) +]) + +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +# LT_AC_PROG_SED +# -------------- +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +AC_DEFUN([LT_AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && break + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_MSG_RESULT([$SED]) +]) + + +# serial 6 AC_LIB_LTDL + +# AC_WITH_LTDL +# ------------ +# Clients of libltdl can use this macro to allow the installer to +# choose between a shipped copy of the ltdl sources or a preinstalled +# version of the library. +AC_DEFUN([AC_WITH_LTDL], +[AC_REQUIRE([AC_LIB_LTDL]) +AC_SUBST([LIBLTDL]) +AC_SUBST([INCLTDL]) + +# Unless the user asks us to check, assume no installed ltdl exists. +use_installed_libltdl=no + +AC_ARG_WITH([included_ltdl], + [ --with-included-ltdl use the GNU ltdl sources included here]) + +if test "x$with_included_ltdl" != xyes; then + # We are not being forced to use the included libltdl sources, so + # decide whether there is a useful installed version we can use. + AC_CHECK_HEADER([ltdl.h], + [AC_CHECK_LIB([ltdl], [lt_dlcaller_register], + [with_included_ltdl=no], + [with_included_ltdl=yes]) + ]) +fi + +if test "x$enable_ltdl_install" != xyes; then + # If the user did not specify an installable libltdl, then default + # to a convenience lib. + AC_LIBLTDL_CONVENIENCE +fi + +if test "x$with_included_ltdl" = xno; then + # If the included ltdl is not to be used. then Use the + # preinstalled libltdl we found. + AC_DEFINE([HAVE_LTDL], 1, + [Define this if a modern libltdl is already installed]) + LIBLTDL=-lltdl +fi - hpux9*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_direct, $1)=yes +# Report our decision... +AC_MSG_CHECKING([whether to use included libltdl]) +AC_MSG_RESULT([$with_included_ltdl]) - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; +AC_CONFIG_SUBDIRS([libltdl]) +])# AC_WITH_LTDL - hpux10* | hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case "$host_cpu" in - hppa*64*|ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case "$host_cpu" in - hppa*64*|ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - case "$host_cpu" in - hppa*64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - ia64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - ;; - *) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +# AC_LIB_LTDL +# ----------- +# Perform all the checks necessary for compilation of the ltdl objects +# -- including compiler checks and header checks. +AC_DEFUN([AC_LIB_LTDL], +[AC_PREREQ(2.50) +AC_REQUIRE([AC_PROG_CC]) +AC_REQUIRE([AC_C_CONST]) +AC_REQUIRE([AC_HEADER_STDC]) +AC_REQUIRE([AC_HEADER_DIRENT]) +AC_REQUIRE([_LT_AC_CHECK_DLFCN]) +AC_REQUIRE([AC_LTDL_ENABLE_INSTALL]) +AC_REQUIRE([AC_LTDL_SHLIBEXT]) +AC_REQUIRE([AC_LTDL_SHLIBPATH]) +AC_REQUIRE([AC_LTDL_SYSSEARCHPATH]) +AC_REQUIRE([AC_LTDL_OBJDIR]) +AC_REQUIRE([AC_LTDL_DLPREOPEN]) +AC_REQUIRE([AC_LTDL_DLLIB]) +AC_REQUIRE([AC_LTDL_SYMBOL_USCORE]) +AC_REQUIRE([AC_LTDL_DLSYM_USCORE]) +AC_REQUIRE([AC_LTDL_SYS_DLOPEN_DEPLIBS]) +AC_REQUIRE([AC_LTDL_FUNC_ARGZ]) - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - fi - ;; +AC_CHECK_HEADERS([assert.h ctype.h errno.h malloc.h memory.h stdlib.h \ + stdio.h unistd.h]) +AC_CHECK_HEADERS([dl.h sys/dl.h dld.h mach-o/dyld.h]) +AC_CHECK_HEADERS([string.h strings.h], [break]) - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; +AC_CHECK_FUNCS([strchr index], [break]) +AC_CHECK_FUNCS([strrchr rindex], [break]) +AC_CHECK_FUNCS([memcpy bcopy], [break]) +AC_CHECK_FUNCS([memmove strcmp]) +AC_CHECK_FUNCS([closedir opendir readdir]) +])# AC_LIB_LTDL - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - newsos6) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; +# AC_LTDL_ENABLE_INSTALL +# ---------------------- +AC_DEFUN([AC_LTDL_ENABLE_INSTALL], +[AC_ARG_ENABLE([ltdl-install], + [AC_HELP_STRING([--enable-ltdl-install], [install libltdl])]) - openbsd*) - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - else - case $host_os in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - ;; - esac - fi - ;; +AM_CONDITIONAL(INSTALL_LTDL, test x"${enable_ltdl_install-no}" != xno) +AM_CONDITIONAL(CONVENIENCE_LTDL, test x"${enable_ltdl_convenience-no}" != xno) +])])# AC_LTDL_ENABLE_INSTALL - os2*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - osf3*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; +# AC_LTDL_SYS_DLOPEN_DEPLIBS +# -------------------------- +AC_DEFUN([AC_LTDL_SYS_DLOPEN_DEPLIBS], +[AC_REQUIRE([AC_CANONICAL_HOST]) +AC_CACHE_CHECK([whether deplibs are loaded by dlopen], + [libltdl_cv_sys_dlopen_deplibs], + [# PORTME does your system automatically load deplibs for dlopen? + # or its logical equivalent (e.g. shl_load for HP-UX < 11) + # For now, we just catch OSes we know something about -- in the + # future, we'll try test this programmatically. + libltdl_cv_sys_dlopen_deplibs=unknown + case "$host_os" in + aix3*|aix4.1.*|aix4.2.*) + # Unknown whether this is true for these versions of AIX, but + # we want this `case' here to explicitly catch those versions. + libltdl_cv_sys_dlopen_deplibs=unknown + ;; + aix[[45]]*) + libltdl_cv_sys_dlopen_deplibs=yes + ;; + darwin*) + # Assuming the user has installed a libdl from somewhere, this is true + # If you are looking for one http://www.opendarwin.org/projects/dlcompat + libltdl_cv_sys_dlopen_deplibs=yes + ;; + gnu* | linux* | kfreebsd*-gnu | knetbsd*-gnu) + # GNU and its variants, using gnu ld.so (Glibc) + libltdl_cv_sys_dlopen_deplibs=yes + ;; + hpux10*|hpux11*) + libltdl_cv_sys_dlopen_deplibs=yes + ;; + irix[[12345]]*|irix6.[[01]]*) + # Catch all versions of IRIX before 6.2, and indicate that we don't + # know how it worked for any of those versions. + libltdl_cv_sys_dlopen_deplibs=unknown + ;; + irix*) + # The case above catches anything before 6.2, and it's known that + # at 6.2 and later dlopen does load deplibs. + libltdl_cv_sys_dlopen_deplibs=yes + ;; + netbsd*) + libltdl_cv_sys_dlopen_deplibs=yes + ;; + openbsd*) + libltdl_cv_sys_dlopen_deplibs=yes + ;; + osf[[1234]]*) + # dlopen did load deplibs (at least at 4.x), but until the 5.x series, + # it did *not* use an RPATH in a shared library to find objects the + # library depends on, so we explictly say `no'. + libltdl_cv_sys_dlopen_deplibs=no + ;; + osf5.0|osf5.0a|osf5.1) + # dlopen *does* load deplibs and with the right loader patch applied + # it even uses RPATH in a shared library to search for shared objects + # that the library depends on, but there's no easy way to know if that + # patch is installed. Since this is the case, all we can really + # say is unknown -- it depends on the patch being installed. If + # it is, this changes to `yes'. Without it, it would be `no'. + libltdl_cv_sys_dlopen_deplibs=unknown + ;; + osf*) + # the two cases above should catch all versions of osf <= 5.1. Read + # the comments above for what we know about them. + # At > 5.1, deplibs are loaded *and* any RPATH in a shared library + # is used to find them so we can finally say `yes'. + libltdl_cv_sys_dlopen_deplibs=yes + ;; + solaris*) + libltdl_cv_sys_dlopen_deplibs=yes + ;; + esac + ]) +if test "$libltdl_cv_sys_dlopen_deplibs" != yes; then + AC_DEFINE([LTDL_DLOPEN_DEPLIBS], [1], + [Define if the OS needs help to load dependent libraries for dlopen().]) +fi +])# AC_LTDL_SYS_DLOPEN_DEPLIBS - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' - # Both c and cxx compiler support -rpath directly - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - fi - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; +# AC_LTDL_SHLIBEXT +# ---------------- +AC_DEFUN([AC_LTDL_SHLIBEXT], +[AC_REQUIRE([AC_LIBTOOL_SYS_DYNAMIC_LINKER]) +AC_CACHE_CHECK([which extension is used for loadable modules], + [libltdl_cv_shlibext], +[ +module=yes +eval libltdl_cv_shlibext=$shrext_cmds + ]) +if test -n "$libltdl_cv_shlibext"; then + AC_DEFINE_UNQUOTED(LTDL_SHLIB_EXT, "$libltdl_cv_shlibext", + [Define to the extension used for shared libraries, say, ".so".]) +fi +])# AC_LTDL_SHLIBEXT - sco3.2v5*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ;; - solaris*) - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; - esac - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; +# AC_LTDL_SHLIBPATH +# ----------------- +AC_DEFUN([AC_LTDL_SHLIBPATH], +[AC_REQUIRE([AC_LIBTOOL_SYS_DYNAMIC_LINKER]) +AC_CACHE_CHECK([which variable specifies run-time library path], + [libltdl_cv_shlibpath_var], [libltdl_cv_shlibpath_var="$shlibpath_var"]) +if test -n "$libltdl_cv_shlibpath_var"; then + AC_DEFINE_UNQUOTED(LTDL_SHLIBPATH_VAR, "$libltdl_cv_shlibpath_var", + [Define to the name of the environment variable that determines the dynamic library search path.]) +fi +])# AC_LTDL_SHLIBPATH - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - sysv4) - case $host_vendor in - sni) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - ;; - motorola) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; +# AC_LTDL_SYSSEARCHPATH +# --------------------- +AC_DEFUN([AC_LTDL_SYSSEARCHPATH], +[AC_REQUIRE([AC_LIBTOOL_SYS_DYNAMIC_LINKER]) +AC_CACHE_CHECK([for the default library search path], + [libltdl_cv_sys_search_path], + [libltdl_cv_sys_search_path="$sys_lib_dlsearch_path_spec"]) +if test -n "$libltdl_cv_sys_search_path"; then + sys_search_path= + for dir in $libltdl_cv_sys_search_path; do + if test -z "$sys_search_path"; then + sys_search_path="$dir" + else + sys_search_path="$sys_search_path$PATH_SEPARATOR$dir" + fi + done + AC_DEFINE_UNQUOTED(LTDL_SYSSEARCHPATH, "$sys_search_path", + [Define to the system default library search path.]) +fi +])# AC_LTDL_SYSSEARCHPATH - sysv4.3*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' - ;; - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - fi - ;; +# AC_LTDL_OBJDIR +# -------------- +AC_DEFUN([AC_LTDL_OBJDIR], +[AC_CACHE_CHECK([for objdir], + [libltdl_cv_objdir], + [libltdl_cv_objdir="$objdir" + if test -n "$objdir"; then + : + else + rm -f .libs 2>/dev/null + mkdir .libs 2>/dev/null + if test -d .libs; then + libltdl_cv_objdir=.libs + else + # MS-DOS does not allow filenames that begin with a dot. + libltdl_cv_objdir=_libs + fi + rmdir .libs 2>/dev/null + fi + ]) +AC_DEFINE_UNQUOTED(LTDL_OBJDIR, "$libltdl_cv_objdir/", + [Define to the sub-directory in which libtool stores uninstalled libraries.]) +])# AC_LTDL_OBJDIR - sysv4.2uw2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - runpath_var='LD_RUN_PATH' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; +# AC_LTDL_DLPREOPEN +# ----------------- +AC_DEFUN([AC_LTDL_DLPREOPEN], +[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE]) +AC_CACHE_CHECK([whether libtool supports -dlopen/-dlpreopen], + [libltdl_cv_preloaded_symbols], + [if test -n "$lt_cv_sys_global_symbol_pipe"; then + libltdl_cv_preloaded_symbols=yes + else + libltdl_cv_preloaded_symbols=no + fi + ]) +if test x"$libltdl_cv_preloaded_symbols" = xyes; then + AC_DEFINE(HAVE_PRELOADED_SYMBOLS, 1, + [Define if libtool can extract symbol lists from object files.]) +fi +])# AC_LTDL_DLPREOPEN - sysv5*) - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - ;; - uts4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; +# AC_LTDL_DLLIB +# ------------- +AC_DEFUN([AC_LTDL_DLLIB], +[LIBADD_DL= +AC_SUBST(LIBADD_DL) +AC_LANG_PUSH([C]) - *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - fi +AC_CHECK_FUNC([shl_load], + [AC_DEFINE([HAVE_SHL_LOAD], [1], + [Define if you have the shl_load function.])], + [AC_CHECK_LIB([dld], [shl_load], + [AC_DEFINE([HAVE_SHL_LOAD], [1], + [Define if you have the shl_load function.]) + LIBADD_DL="$LIBADD_DL -ldld"], + [AC_CHECK_LIB([dl], [dlopen], + [AC_DEFINE([HAVE_LIBDL], [1], + [Define if you have the libdl library or equivalent.]) + LIBADD_DL="-ldl" libltdl_cv_lib_dl_dlopen="yes"], + [AC_TRY_LINK([#if HAVE_DLFCN_H +# include +#endif + ], + [dlopen(0, 0);], + [AC_DEFINE([HAVE_LIBDL], [1], + [Define if you have the libdl library or equivalent.]) libltdl_cv_func_dlopen="yes"], + [AC_CHECK_LIB([svld], [dlopen], + [AC_DEFINE([HAVE_LIBDL], [1], + [Define if you have the libdl library or equivalent.]) + LIBADD_DL="-lsvld" libltdl_cv_func_dlopen="yes"], + [AC_CHECK_LIB([dld], [dld_link], + [AC_DEFINE([HAVE_DLD], [1], + [Define if you have the GNU dld library.]) + LIBADD_DL="$LIBADD_DL -ldld"], + [AC_CHECK_FUNC([_dyld_func_lookup], + [AC_DEFINE([HAVE_DYLD], [1], + [Define if you have the _dyld_func_lookup function.])]) + ]) + ]) + ]) + ]) + ]) ]) -AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +if test x"$libltdl_cv_func_dlopen" = xyes || test x"$libltdl_cv_lib_dl_dlopen" = xyes +then + lt_save_LIBS="$LIBS" + LIBS="$LIBS $LIBADD_DL" + AC_CHECK_FUNCS([dlerror]) + LIBS="$lt_save_LIBS" fi +AC_LANG_POP +])# AC_LTDL_DLLIB -# -# Do we need to explicitly link libc? -# -case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in -x|xyes) - # Assume -lc should be added - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $_LT_AC_TAGVAR(archive_cmds, $1) in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_MSG_CHECKING([whether -lc should be explicitly linked in]) - $rm conftest* - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) - then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +# AC_LTDL_SYMBOL_USCORE +# --------------------- +# does the compiler prefix global symbols with an underscore? +AC_DEFUN([AC_LTDL_SYMBOL_USCORE], +[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE]) +AC_CACHE_CHECK([for _ prefix in compiled symbols], + [ac_cv_sys_symbol_underscore], + [ac_cv_sys_symbol_underscore=no + cat > conftest.$ac_ext < $ac_nlist) && test -s "$ac_nlist"; then + # See whether the symbols have a leading underscore. + if grep '^. _nm_test_func' "$ac_nlist" >/dev/null; then + ac_cv_sys_symbol_underscore=yes + else + if grep '^. nm_test_func ' "$ac_nlist" >/dev/null; then + : else - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC fi - _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 fi - $rm conftest* - AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) - ;; - esac + else + echo "configure: cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC + fi + else + echo "configure: failed program was:" >&AC_FD_CC + cat conftest.c >&AC_FD_CC fi - ;; -esac -])# AC_LIBTOOL_PROG_LD_SHLIBS - - -# _LT_AC_FILE_LTDLL_C -# ------------------- -# Be careful that the start marker always follows a newline. -AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ -])# _LT_AC_FILE_LTDLL_C - - -# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) -# --------------------------------- -AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) + rm -rf conftest* + ]) +])# AC_LTDL_SYMBOL_USCORE -# old names -AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) -AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) -AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) -AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) -AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) +# AC_LTDL_DLSYM_USCORE +# -------------------- +AC_DEFUN([AC_LTDL_DLSYM_USCORE], +[AC_REQUIRE([AC_LTDL_SYMBOL_USCORE]) +if test x"$ac_cv_sys_symbol_underscore" = xyes; then + if test x"$libltdl_cv_func_dlopen" = xyes || + test x"$libltdl_cv_lib_dl_dlopen" = xyes ; then + AC_CACHE_CHECK([whether we have to add an underscore for dlsym], + [libltdl_cv_need_uscore], + [libltdl_cv_need_uscore=unknown + save_LIBS="$LIBS" + LIBS="$LIBS $LIBADD_DL" + _LT_AC_TRY_DLOPEN_SELF( + [libltdl_cv_need_uscore=no], [libltdl_cv_need_uscore=yes], + [], [libltdl_cv_need_uscore=cross]) + LIBS="$save_LIBS" + ]) + fi +fi -# This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL]) +if test x"$libltdl_cv_need_uscore" = xyes; then + AC_DEFINE(NEED_USCORE, 1, + [Define if dlsym() requires a leading underscore in symbol names.]) +fi +])# AC_LTDL_DLSYM_USCORE -AC_DEFUN([LT_AC_PROG_GCJ], -[AC_CHECK_TOOL(GCJ, gcj, no) - test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" - AC_SUBST(GCJFLAGS) -]) +# AC_LTDL_FUNC_ARGZ +# ----------------- +AC_DEFUN([AC_LTDL_FUNC_ARGZ], +[AC_CHECK_HEADERS([argz.h]) -AC_DEFUN([LT_AC_PROG_RC], -[AC_CHECK_TOOL(RC, windres, no) -]) +AC_CHECK_TYPES([error_t], + [], + [AC_DEFINE([error_t], [int], + [Define to a type to use for `error_t' if it is not otherwise available.])], + [#if HAVE_ARGZ_H +# include +#endif]) -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_SED. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # -# LT_AC_PROG_SED -# -------------- -# Check for a fully-functional sed program, that truncates -# as few characters as possible. Prefer GNU sed if found. -AC_DEFUN([LT_AC_PROG_SED], -[AC_MSG_CHECKING([for a sed that does not truncate output]) -AC_CACHE_VAL(lt_cv_path_SED, -[# Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi - done - done -done -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && break - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break - fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break - lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed - fi - done -done -]) -SED=$lt_cv_path_SED -AC_MSG_RESULT([$SED]) -]) +AC_CHECK_FUNCS([argz_append argz_create_sep argz_insert argz_next argz_stringify]) +])# AC_LTDL_FUNC_ARGZ diff --git a/lib/cppunit-1.10.0/Makefile.in b/lib/cppunit-1.10.0/Makefile.in index e4f6a9de65..b766ff5242 100644 --- a/lib/cppunit-1.10.0/Makefile.in +++ b/lib/cppunit-1.10.0/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/aclocal.m4 b/lib/cppunit-1.10.0/aclocal.m4 index bca2016f4b..ab38ca1d36 100644 --- a/lib/cppunit-1.10.0/aclocal.m4 +++ b/lib/cppunit-1.10.0/aclocal.m4 @@ -882,81 +882,463 @@ AC_MSG_RESULT($_am_result) rm -f confinc confmf ]) +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- + +# serial 47 AC_PROG_LIBTOOL -# serial 40 AC_PROG_LIBTOOL -AC_DEFUN(AC_PROG_LIBTOOL, -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl -# Save cache, so that ltconfig can load it -AC_CACHE_SAVE +# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) +# ----------------------------------------------------------- +# If this macro is not defined by Autoconf, define it here. +m4_ifdef([AC_PROVIDE_IFELSE], + [], + [m4_define([AC_PROVIDE_IFELSE], + [m4_ifdef([AC_PROVIDE_$1], + [$2], [$3])])]) -# Actually configure libtool. ac_aux_dir is where install-sh is found. -CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ -LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ -DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ -${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ -|| AC_MSG_ERROR([libtool configure failed]) -# Reload cache, that may have been modified by ltconfig -AC_CACHE_LOAD +# AC_PROG_LIBTOOL +# --------------- +AC_DEFUN([AC_PROG_LIBTOOL], +[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl +dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX +dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. + AC_PROVIDE_IFELSE([AC_PROG_CXX], + [AC_LIBTOOL_CXX], + [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX + ])]) +dnl And a similar setup for Fortran 77 support + AC_PROVIDE_IFELSE([AC_PROG_F77], + [AC_LIBTOOL_F77], + [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 +])]) + +dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. +dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run +dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. + AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [ifdef([AC_PROG_GCJ], + [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([A][M_PROG_GCJ], + [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([LT_AC_PROG_GCJ], + [define([LT_AC_PROG_GCJ], + defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) +])])# AC_PROG_LIBTOOL + + +# _AC_PROG_LIBTOOL +# ---------------- +AC_DEFUN([_AC_PROG_LIBTOOL], +[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl +AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl +AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl +AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl # This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" +LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl -# Redirect the config.log output again, so that the ltconfig log is not -# clobbered by the next message. -exec 5>>./config.log -]) +# Prevent multiple expansion +define([AC_PROG_LIBTOOL], []) +])# _AC_PROG_LIBTOOL + -AC_DEFUN(AC_LIBTOOL_SETUP, -[AC_PREREQ(2.13)dnl +# AC_LIBTOOL_SETUP +# ---------------- +AC_DEFUN([AC_LIBTOOL_SETUP], +[AC_PREREQ(2.50)dnl AC_REQUIRE([AC_ENABLE_SHARED])dnl AC_REQUIRE([AC_ENABLE_STATIC])dnl AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_LD])dnl +AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl AC_REQUIRE([AC_PROG_NM])dnl + AC_REQUIRE([AC_PROG_LN_S])dnl +AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl +# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! +AC_REQUIRE([AC_OBJEXT])dnl +AC_REQUIRE([AC_EXEEXT])dnl dnl -case "$target" in -NONE) lt_target="$host" ;; -*) lt_target="$target" ;; +AC_LIBTOOL_SYS_MAX_CMD_LEN +AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +AC_LIBTOOL_OBJDIR + +AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +_LT_AC_PROG_ECHO_BACKSLASH + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e s/^X//' +[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] + +# Same as above, but do not quote variable references. +[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +# Constants: +rm="rm -f" + +# Global variables: +default_ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except M$VC, +# which needs '.lib'). +libext=a +ltmain="$ac_aux_dir/ltmain.sh" +ofile="$default_ofile" +with_gnu_ld="$lt_cv_prog_gnu_ld" + +AC_CHECK_TOOL(AR, ar, false) +AC_CHECK_TOOL(RANLIB, ranlib, :) +AC_CHECK_TOOL(STRIP, strip, :) + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AS" && AS=as +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LD" && LD=ld +test -z "$LN_S" && LN_S="ln -s" +test -z "$MAGIC_CMD" && MAGIC_CMD=file +test -z "$NM" && NM=nm +test -z "$SED" && SED=sed +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$RANLIB" && RANLIB=: +test -z "$STRIP" && STRIP=: +test -z "$ac_objext" && ac_objext=o + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" + ;; + *) + old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` + +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + AC_PATH_MAGIC + fi + ;; +esac + +AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) +AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +enable_win32_dll=yes, enable_win32_dll=no) + +AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +AC_ARG_WITH([pic], + [AC_HELP_STRING([--with-pic], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [pic_mode="$withval"], + [pic_mode=default]) +test -z "$pic_mode" && pic_mode=default + +# Use C for the default configuration in the libtool script +tagname= +AC_LIBTOOL_LANG_C_CONFIG +_LT_AC_TAGCONFIG +])# AC_LIBTOOL_SETUP + + +# _LT_AC_SYS_COMPILER +# ------------------- +AC_DEFUN([_LT_AC_SYS_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_AC_SYS_COMPILER + + +# _LT_AC_SYS_LIBPATH_AIX +# ---------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], +[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi],[]) +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +])# _LT_AC_SYS_LIBPATH_AIX + + +# _LT_AC_SHELL_INIT(ARG) +# ---------------------- +AC_DEFUN([_LT_AC_SHELL_INIT], +[ifdef([AC_DIVERSION_NOTICE], + [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], + [AC_DIVERT_PUSH(NOTICE)]) +$1 +AC_DIVERT_POP +])# _LT_AC_SHELL_INIT + + +# _LT_AC_PROG_ECHO_BACKSLASH +# -------------------------- +# Add some code to the start of the generated configure script which +# will find an echo command which doesn't interpret backslashes. +AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], +[_LT_AC_SHELL_INIT([ +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` + ;; esac -# Check for any special flags to pass to ltconfig. -libtool_flags="--cache-file=$cache_file" -test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" -test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" -test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" -test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" -test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" -ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], -[libtool_flags="$libtool_flags --enable-dlopen"]) -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[libtool_flags="$libtool_flags --enable-win32-dll"]) -AC_ARG_ENABLE(libtool-lock, - [ --disable-libtool-lock avoid locking (might break parallel builds)]) -test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" -test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" +echo=${ECHO-echo} +if test "X[$]1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X[$]1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} +fi + +if test "X[$]1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null 2>&1 && unset CDPATH + +if test -z "$ECHO"; then +if test "X${echo_test_string+set}" != Xset; then +# find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if (echo_test_string="`eval $cmd`") 2>/dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL [$]0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL [$]0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "[$]0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" +fi + +AC_SUBST(ECHO) +])])# _LT_AC_PROG_ECHO_BACKSLASH + + +# _LT_AC_LOCK +# ----------- +AC_DEFUN([_LT_AC_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. -case "$lt_target" in +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then - case "`/usr/bin/file conftest.o`" in + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; @@ -967,6 +1349,49 @@ case "$lt_target" in LD="${LD-ld} -64" ;; esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case "`/usr/bin/file conftest.o`" in + *32-bit*) + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac fi rm -rf conftest* ;; @@ -976,324 +1401,5451 @@ case "$lt_target" in SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])]) + [AC_LANG_PUSH(C) + AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; - -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw*) +AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +[*-*-cygwin* | *-*-mingw* | *-*-pw32*) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) ;; -]) + ]) esac -]) -# AC_LIBTOOL_DLOPEN - enable checks for dlopen support -AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) - -# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's -AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) - -# AC_ENABLE_SHARED - implement the --enable-shared flag -# Usage: AC_ENABLE_SHARED[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_SHARED, [dnl -define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(shared, -changequote(<<, >>)dnl -<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl +need_locks="$enable_libtool_lock" + +])# _LT_AC_LOCK + + +# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], +[AC_REQUIRE([LT_AC_PROG_SED]) +AC_CACHE_CHECK([$1], [$2], + [$2=no + ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s conftest.err; then + $2=yes + fi + fi + $rm conftest* ]) -# AC_DISABLE_SHARED - set the default shared flag to --disable-shared -AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no)]) - -# AC_ENABLE_STATIC - implement the --enable-static flag -# Usage: AC_ENABLE_STATIC[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_STATIC, [dnl -define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(static, -changequote(<<, >>)dnl -<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_static=AC_ENABLE_STATIC_DEFAULT)dnl +if test x"[$]$2" = xyes; then + ifelse([$5], , :, [$5]) +else + ifelse([$6], , :, [$6]) +fi +])# AC_LIBTOOL_COMPILER_OPTION + + +# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ------------------------------------------------------------ +# Check whether the given compiler option works +AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], +[AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" + printf "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + else + $2=yes + fi + fi + $rm conftest* + LDFLAGS="$save_LDFLAGS" ]) -# AC_DISABLE_STATIC - set the default static flag to --disable-static -AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no)]) +if test x"[$]$2" = xyes; then + ifelse([$4], , :, [$4]) +else + ifelse([$5], , :, [$5]) +fi +])# AC_LIBTOOL_LINKER_OPTION + + +# AC_LIBTOOL_SYS_MAX_CMD_LEN +# -------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], +[# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; -# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag -# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl -define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(fast-install, -changequote(<<, >>)dnl -<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes + cygwin* | mingw*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* ) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for *BSD fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + ;; + + *) + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ + = "XX$teststring") >/dev/null 2>&1 && + new_result=`expr "X$teststring" : ".*" 2>&1` && + lt_cv_sys_max_cmd_len=$new_result && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + teststring= + # Add a significant safety factor because C++ compilers can tack on massive + # amounts of additional arguments before passing them to the linker. + # It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + ;; + esac ]) +if test -n $lt_cv_sys_max_cmd_len ; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +])# AC_LIBTOOL_SYS_MAX_CMD_LEN -# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install -AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no)]) -# AC_PROG_LD - find the path to the GNU or non-GNU linker -AC_DEFUN(AC_PROG_LD, -[AC_ARG_WITH(gnu-ld, -[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], -test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -ac_prog=ld -if test "$ac_cv_prog_gcc" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - ac_prog=`($CC -print-prog-name=ld) 2>&5` - case "$ac_prog" in - # Accept absolute paths. -changequote(,)dnl - [\\/]* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' -changequote([,])dnl - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld +# _LT_AC_CHECK_DLFCN +# -------------------- +AC_DEFUN([_LT_AC_CHECK_DLFCN], +[AC_CHECK_HEADERS(dlfcn.h)dnl +])# _LT_AC_CHECK_DLFCN + + +# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ------------------------------------------------------------------ +AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], +[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +if test "$cross_compiling" = yes; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +}] +EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_unknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_AC_TRY_DLOPEN_SELF + + +# AC_LIBTOOL_DLOPEN_SELF +# ------------------- +AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], +[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes ;; + + mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) + ]) + ]) + ]) + ]) + ]) ;; esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +])# AC_LIBTOOL_DLOPEN_SELF + + +# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) +# --------------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler +AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], +[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s out/conftest.err; then + _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* +]) +])# AC_LIBTOOL_PROG_CC_C_O + + +# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) +# ----------------------------------------- +# Check to see if we can do hard links to lock some files if needed +AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], +[AC_REQUIRE([_LT_AC_LOCK])dnl + +hard_links="nottested" +if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + need_locks=warn + fi else - AC_MSG_CHECKING([for non-GNU ld]) + need_locks=no fi -AC_CACHE_VAL(ac_cv_path_LD, -[if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - ac_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" +])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS + + +# AC_LIBTOOL_OBJDIR +# ----------------- +AC_DEFUN([AC_LIBTOOL_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs else - ac_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$ac_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +])# AC_LIBTOOL_OBJDIR + + +# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) +# ---------------------------------------------- +# Check hardcoding attributes. +AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_AC_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ + test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ + test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. + _LT_AC_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_AC_TAGVAR(hardcode_action, $1)=immediate + fi else - AC_MSG_RESULT(no) + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_AC_TAGVAR(hardcode_action, $1)=unsupported fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_PROG_LD_GNU -]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) -AC_DEFUN(AC_PROG_LD_GNU, -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - ac_cv_prog_gnu_ld=yes +if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi +])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH + + +# AC_LIBTOOL_SYS_LIB_STRIP +# ------------------------ +AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], +[striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) else - ac_cv_prog_gnu_ld=no -fi]) -]) +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) +fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +])# AC_LIBTOOL_SYS_LIB_STRIP -# AC_PROG_NM - find the path to a BSD-compatible name lister -AC_DEFUN(AC_PROG_NM, -[AC_MSG_CHECKING([for BSD-compatible nm]) -AC_CACHE_VAL(ac_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - ac_cv_path_NM="$NM" + +# AC_LIBTOOL_SYS_DYNAMIC_LINKER +# ----------------------------- +# PORTME Fill in your ld.so characteristics +AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], +[AC_MSG_CHECKING([dynamic linker characteristics]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" - break - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" - break + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix4* | aix5*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : else - ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags + can_build_shared=no fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm -fi]) -NM="$ac_cv_path_NM" -AC_MSG_RESULT([$NM]) -]) + shlibpath_var=LIBPATH + fi + ;; -# AC_CHECK_LIBM - check for math library -AC_DEFUN(AC_CHECK_LIBM, -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case "$lt_target" in -*-*-beos* | *-*-cygwin*) - # These system don't have libm +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH ;; -*) - AC_CHECK_LIB(m, main, LIBM="-lm") + +bsdi[[45]]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +kfreebsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + *) # from 3.2 on + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case "$host_cpu" in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no +])# AC_LIBTOOL_SYS_DYNAMIC_LINKER + + +# _LT_AC_TAGCONFIG +# ---------------- +AC_DEFUN([_LT_AC_TAGCONFIG], +[AC_ARG_WITH([tags], + [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], + [include additional configurations @<:@automatic@:>@])], + [tagnames="$withval"]) + +if test -f "$ltmain" && test -n "$tagnames"; then + if test ! -f "${ofile}"; then + AC_MSG_WARN([output file `$ofile' does not exist]) + fi + + if test -z "$LTCC"; then + eval "`$SHELL ${ofile} --config | grep '^LTCC='`" + if test -z "$LTCC"; then + AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) + else + AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) + fi + fi + + # Extract list of available tagged configurations in $ofile. + # Note that this assumes the entire list is on one line. + available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` + + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for tagname in $tagnames; do + IFS="$lt_save_ifs" + # Check whether tagname contains only valid characters + case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in + "") ;; + *) AC_MSG_ERROR([invalid tag name: $tagname]) + ;; + esac + + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null + then + AC_MSG_ERROR([tag name \"$tagname\" already exists]) + fi + + # Update the list of available tags. + if test -n "$tagname"; then + echo appending configuration tag \"$tagname\" to $ofile + + case $tagname in + CXX) + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_LIBTOOL_LANG_CXX_CONFIG + else + tagname="" + fi + ;; + + F77) + if test -n "$F77" && test "X$F77" != "Xno"; then + AC_LIBTOOL_LANG_F77_CONFIG + else + tagname="" + fi + ;; + + GCJ) + if test -n "$GCJ" && test "X$GCJ" != "Xno"; then + AC_LIBTOOL_LANG_GCJ_CONFIG + else + tagname="" + fi + ;; + + RC) + AC_LIBTOOL_LANG_RC_CONFIG + ;; + + *) + AC_MSG_ERROR([Unsupported tag name: $tagname]) + ;; + esac + + # Append the new tag name to the list of available tags. + if test -n "$tagname" ; then + available_tags="$available_tags $tagname" + fi + fi + done + IFS="$lt_save_ifs" + + # Now substitute the updated list of available tags. + if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then + mv "${ofile}T" "$ofile" + chmod +x "$ofile" + else + rm -f "${ofile}T" + AC_MSG_ERROR([unable to update list of available tagged configurations.]) + fi +fi +])# _LT_AC_TAGCONFIG + + +# AC_LIBTOOL_DLOPEN +# ----------------- +# enable checks for dlopen support +AC_DEFUN([AC_LIBTOOL_DLOPEN], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) +])# AC_LIBTOOL_DLOPEN + + +# AC_LIBTOOL_WIN32_DLL +# -------------------- +# declare package support for building win32 dll's +AC_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) +])# AC_LIBTOOL_WIN32_DLL + + +# AC_ENABLE_SHARED([DEFAULT]) +# --------------------------- +# implement the --enable-shared flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_SHARED], +[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([shared], + [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_shared=]AC_ENABLE_SHARED_DEFAULT) +])# AC_ENABLE_SHARED + + +# AC_DISABLE_SHARED +# ----------------- +#- set the default shared flag to --disable-shared +AC_DEFUN([AC_DISABLE_SHARED], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_SHARED(no) +])# AC_DISABLE_SHARED + + +# AC_ENABLE_STATIC([DEFAULT]) +# --------------------------- +# implement the --enable-static flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_STATIC], +[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([static], + [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_static=]AC_ENABLE_STATIC_DEFAULT) +])# AC_ENABLE_STATIC + + +# AC_DISABLE_STATIC +# ----------------- +# set the default static flag to --disable-static +AC_DEFUN([AC_DISABLE_STATIC], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_STATIC(no) +])# AC_DISABLE_STATIC + + +# AC_ENABLE_FAST_INSTALL([DEFAULT]) +# --------------------------------- +# implement the --enable-fast-install flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_FAST_INSTALL], +[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([fast-install], + [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) +])# AC_ENABLE_FAST_INSTALL + + +# AC_DISABLE_FAST_INSTALL +# ----------------------- +# set the default to --disable-fast-install +AC_DEFUN([AC_DISABLE_FAST_INSTALL], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_FAST_INSTALL(no) +])# AC_DISABLE_FAST_INSTALL + + +# AC_LIBTOOL_PICMODE([MODE]) +# -------------------------- +# implement the --with-pic flag +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +AC_DEFUN([AC_LIBTOOL_PICMODE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +pic_mode=ifelse($#,1,$1,default) +])# AC_LIBTOOL_PICMODE + + +# AC_PROG_EGREP +# ------------- +# This is predefined starting with Autoconf 2.54, so this conditional +# definition can be removed once we require Autoconf 2.54 or later. +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], +[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], + [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi]) + EGREP=$ac_cv_prog_egrep + AC_SUBST([EGREP]) +])]) + + +# AC_PATH_TOOL_PREFIX +# ------------------- +# find a file program which can recognise shared library +AC_DEFUN([AC_PATH_TOOL_PREFIX], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="ifelse([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +])# AC_PATH_TOOL_PREFIX + + +# AC_PATH_MAGIC +# ------------- +# find a file program which can recognise a shared library +AC_DEFUN([AC_PATH_MAGIC], +[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# AC_PATH_MAGIC + + +# AC_PROG_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([AC_PROG_LD], +[AC_ARG_WITH([gnu-ld], + [AC_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no]) +AC_REQUIRE([LT_AC_PROG_SED])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case "$host_cpu" in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux*) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +nto-qnx*) + lt_cv_deplibs_check_method=unknown + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +sco3.2v5*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown +])# AC_DEPLIBS_CHECK_METHOD + + +# AC_PROG_NM +# ---------- +# find the pathname to a BSD-compatible name lister +AC_DEFUN([AC_PROG_NM], +[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/${ac_tool_prefix}nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + esac + fi + done + IFS="$lt_save_ifs" + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +fi]) +NM="$lt_cv_path_NM" +])# AC_PROG_NM + + +# AC_CHECK_LIBM +# ------------- +# check for math library +AC_DEFUN([AC_CHECK_LIBM], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM="-lm") + ;; +esac +])# AC_CHECK_LIBM + + +# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) +# ----------------------------------- +# sets LIBLTDL to the link flags for the libltdl convenience library and +# LTDLINCL to the include flags for the libltdl header and adds +# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL +# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If +# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will +# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with +# '${top_srcdir}/' (note the single quotes!). If your package is not +# flat and you're not using automake, define top_builddir and +# top_srcdir appropriately in the Makefiles. +AC_DEFUN([AC_LIBLTDL_CONVENIENCE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + case $enable_ltdl_convenience in + no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; + "") enable_ltdl_convenience=yes + ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; + esac + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" +])# AC_LIBLTDL_CONVENIENCE + + +# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) +# ----------------------------------- +# sets LIBLTDL to the link flags for the libltdl installable library and +# LTDLINCL to the include flags for the libltdl header and adds +# --enable-ltdl-install to the configure arguments. Note that LIBLTDL +# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If +# DIRECTORY is not provided and an installed libltdl is not found, it is +# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' +# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single +# quotes!). If your package is not flat and you're not using automake, +# define top_builddir and top_srcdir appropriately in the Makefiles. +# In the future, this macro may have to be called after AC_PROG_LIBTOOL. +AC_DEFUN([AC_LIBLTDL_INSTALLABLE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + AC_CHECK_LIB(ltdl, lt_dlinit, + [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], + [if test x"$enable_ltdl_install" = xno; then + AC_MSG_WARN([libltdl not installed, but installation disabled]) + else + enable_ltdl_install=yes + fi + ]) + if test x"$enable_ltdl_install" = x"yes"; then + ac_configure_args="$ac_configure_args --enable-ltdl-install" + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + else + ac_configure_args="$ac_configure_args --enable-ltdl-install=no" + LIBLTDL="-lltdl" + LTDLINCL= + fi + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" +])# AC_LIBLTDL_INSTALLABLE + + +# AC_LIBTOOL_CXX +# -------------- +# enable support for C++ libraries +AC_DEFUN([AC_LIBTOOL_CXX], +[AC_REQUIRE([_LT_AC_LANG_CXX]) +])# AC_LIBTOOL_CXX + + +# _LT_AC_LANG_CXX +# --------------- +AC_DEFUN([_LT_AC_LANG_CXX], +[AC_REQUIRE([AC_PROG_CXX]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) +])# _LT_AC_LANG_CXX + +# _LT_AC_PROG_CXXCPP +# --------------- +AC_DEFUN([_LT_AC_PROG_CXXCPP], +[ +AC_REQUIRE([AC_PROG_CXX]) +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +fi +])# _LT_AC_PROG_CXXCPP + +# AC_LIBTOOL_F77 +# -------------- +# enable support for Fortran 77 libraries +AC_DEFUN([AC_LIBTOOL_F77], +[AC_REQUIRE([_LT_AC_LANG_F77]) +])# AC_LIBTOOL_F77 + + +# _LT_AC_LANG_F77 +# --------------- +AC_DEFUN([_LT_AC_LANG_F77], +[AC_REQUIRE([AC_PROG_F77]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) +])# _LT_AC_LANG_F77 + + +# AC_LIBTOOL_GCJ +# -------------- +# enable support for GCJ libraries +AC_DEFUN([AC_LIBTOOL_GCJ], +[AC_REQUIRE([_LT_AC_LANG_GCJ]) +])# AC_LIBTOOL_GCJ + + +# _LT_AC_LANG_GCJ +# --------------- +AC_DEFUN([_LT_AC_LANG_GCJ], +[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], + [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], + [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], + [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) +])# _LT_AC_LANG_GCJ + + +# AC_LIBTOOL_RC +# -------------- +# enable support for Windows resource files +AC_DEFUN([AC_LIBTOOL_RC], +[AC_REQUIRE([LT_AC_PROG_RC]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) +])# AC_LIBTOOL_RC + + +# AC_LIBTOOL_LANG_C_CONFIG +# ------------------------ +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) +AC_DEFUN([_LT_AC_LANG_C_CONFIG], +[lt_save_CC="$CC" +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}\n' + +_LT_AC_SYS_COMPILER + +# +# Check for any special shared library compilation flags. +# +_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= +if test "$GCC" = no; then + case $host_os in + sco3.2v5*) + _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' + ;; + esac +fi +if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then + AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) + if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ ]]" >/dev/null; then : + else + AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) + _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no + fi +fi + + +# +# Check to make sure the static flag actually works. +# +AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works], + _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), + $_LT_AC_TAGVAR(lt_prog_compiler_static, $1), + [], + [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) + + +AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP +AC_LIBTOOL_DLOPEN_SELF($1) + +# Report which librarie types wil actually be built +AC_MSG_CHECKING([if libtool supports shared libraries]) +AC_MSG_RESULT([$can_build_shared]) + +AC_MSG_CHECKING([whether to build shared libraries]) +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + +aix4* | aix5*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; +esac +AC_MSG_RESULT([$enable_shared]) + +AC_MSG_CHECKING([whether to build static libraries]) +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +AC_MSG_RESULT([$enable_static]) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_POP +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_C_CONFIG + + +# AC_LIBTOOL_LANG_CXX_CONFIG +# -------------------------- +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) +AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], +[AC_LANG_PUSH(C++) +AC_REQUIRE([AC_PROG_CXX]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) + +_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_AC_TAGVAR(allow_undefined_flag, $1)= +_LT_AC_TAGVAR(always_export_symbols, $1)=no +_LT_AC_TAGVAR(archive_expsym_cmds, $1)= +_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_direct, $1)=no +_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +_LT_AC_TAGVAR(hardcode_minus_L, $1)=no +_LT_AC_TAGVAR(hardcode_automatic, $1)=no +_LT_AC_TAGVAR(module_cmds, $1)= +_LT_AC_TAGVAR(module_expsym_cmds, $1)= +_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_AC_TAGVAR(no_undefined_flag, $1)= +_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Dependencies to place before and after the object being linked: +_LT_AC_TAGVAR(predep_objects, $1)= +_LT_AC_TAGVAR(postdep_objects, $1)= +_LT_AC_TAGVAR(predeps, $1)= +_LT_AC_TAGVAR(postdeps, $1)= +_LT_AC_TAGVAR(compiler_lib_search_path, $1)= + +# Source file extension for C++ test sources. +ac_ext=cc + +# Object file extension for compiled C++ test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_LD=$LD +lt_save_GCC=$GCC +GCC=$GXX +lt_save_with_gnu_ld=$with_gnu_ld +lt_save_path_LD=$lt_cv_path_LD +if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +else + unset lt_cv_prog_gnu_ld +fi +if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX +else + unset lt_cv_path_LD +fi +test -z "${LDCXX+set}" || LD=$LDCXX +CC=${CXX-"c++"} +compiler=$CC +_LT_AC_TAGVAR(compiler, $1)=$CC +cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` + +# We don't want -fno-exception wen compiling C++ code, so set the +# no_builtin_flag separately +if test "$GXX" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' +else + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= +fi + +if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + AC_PROG_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ + grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + +else + GXX=no + with_gnu_ld=no + wlarc= +fi + +# PORTME: fill in a description of your system's C++ link characteristics +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +_LT_AC_TAGVAR(ld_shlibs, $1)=yes +case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GXX" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds it's shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + darwin* | rhapsody*) + case "$host_os" in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GXX" = yes ; then + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + fi + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case "$cc_basename" in + xlc*) + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi + ;; + + dgux*) + case $cc_basename in + ec++) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + freebsd[12]*) + # C++ shared libraries reported to be fairly broken before switch to ELF + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + freebsd-elf*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + freebsd* | kfreebsd*-gnu) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + ;; + gnu*) + ;; + hpux9*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aCC) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + case "$host_cpu" in + hppa*64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + ;; + *) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi + case "$host_cpu" in + hppa*64*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + *) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aCC) + case "$host_cpu" in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case "$host_cpu" in + ia64*|hppa*64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + irix5* | irix6*) + case $cc_basename in + CC) + # SGI C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + fi + fi + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + linux*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + cxx) + # Compaq C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + esac + ;; + lynxos*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + m88k*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + mvs*) + case $cc_basename in + cxx) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + openbsd2*) + # C++ shared libraries are fairly broken + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd='echo' + ;; + osf3*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + + ;; + RCC) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + cxx) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + osf4* | osf5*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' + ;; + RCC) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + cxx) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ + $rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + psos*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + sco*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + lcc) + # Lucid + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + solaris*) + case $cc_basename in + CC) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The C++ compiler is used as linker so we must use $wl + # flag to pass the commands to the underlying system + # linker. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | grep -v '^2\.7' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + fi + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + fi + ;; + esac + ;; + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + tandem*) + case $cc_basename in + NCC) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + vxworks*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +esac +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +_LT_AC_TAGVAR(GCC, $1)="$GXX" +_LT_AC_TAGVAR(LD, $1)="$LD" + +AC_LIBTOOL_POSTDEP_PREDEP($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP +AC_LIBTOOL_DLOPEN_SELF($1) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_POP +CC=$lt_save_CC +LDCXX=$LD +LD=$lt_save_LD +GCC=$lt_save_GCC +with_gnu_ldcxx=$with_gnu_ld +with_gnu_ld=$lt_save_with_gnu_ld +lt_cv_path_LDCXX=$lt_cv_path_LD +lt_cv_path_LD=$lt_save_path_LD +lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +])# AC_LIBTOOL_LANG_CXX_CONFIG + +# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) +# ------------------------ +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext <> "$cfgfile" +ifelse([$1], [], +[#! $SHELL + +# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. +# +# This file is part of GNU Libtool: +# Originally by Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="$SED -e s/^X//" + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# The names of the tagged configurations supported by this script. +available_tags= + +# ### BEGIN LIBTOOL CONFIG], +[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# A language-specific compiler. +CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) + +# Is the compiler the GNU C compiler? +with_gcc=$_LT_AC_TAGVAR(GCC, $1) + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_[]_LT_AC_TAGVAR(LD, $1) + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) + +# Must we lock files when doing compilation ? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) + +# Commands used to build and install a shared archive. +archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) +archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) +module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" + +# Set to yes if exported symbols are required. +always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) + +# The commands to list exported symbols. +export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) + +# Symbols that must always be exported. +include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) + +ifelse([$1],[], +[# ### END LIBTOOL CONFIG], +[# ### END LIBTOOL TAG CONFIG: $tagname]) + +__EOF__ + +ifelse([$1],[], [ + case $host_os in + aix3*) + cat <<\EOF >> "$cfgfile" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + esac + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || \ + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +]) +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi +])# AC_LIBTOOL_CONFIG + + +# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------------------- +AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], +[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl + +_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + + AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI + + +# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +# --------------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], +[AC_REQUIRE([AC_CANONICAL_HOST]) +AC_REQUIRE([AC_PROG_NM]) +AC_REQUIRE([AC_OBJEXT]) +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Transform the above into a raw symbol and a C symbol. +symxfrm='\1 \2\3 \3' + +# Transform an extracted symbol line into a proper C declaration +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) # Its linker distinguishes data from code symbols + if test "$host_cpu" = ia64; then + symcode='[[ABCDEGRST]]' + fi + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDGIRSTW]]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +osf*) + symcode='[[BCDEGQRST]]' + ;; +solaris* | sysv5*) + symcode='[[BDRT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGIRSTW]]' ;; +esac + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + # Write the raw and C identifiers. + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if grep ' nm_test_var$' "$nlist" >/dev/null; then + if grep ' nm_test_func$' "$nlist" >/dev/null; then + cat < conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' + + cat <> conftest.$ac_ext +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +lt_preloaded_symbols[[]] = +{ +EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr_t) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -f conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi +]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE + + +# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) +# --------------------------------------- +AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], +[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= + +AC_MSG_CHECKING([for $compiler option to produce PIC]) + ifelse([$1],[CXX],[ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | os2* | pw32*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix4* | aix5*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68) + # Green Hills C++ Compiler + # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case "$cc_basename" in + xlc*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + esac + ;; + dgux*) + case $cc_basename in + ec++) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | kfreebsd*-gnu) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux*) + case $cc_basename in + KCC) + # KAI C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + icpc) + # Intel C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + cxx) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd*) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC) + # Rational C++ 2.4.1 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx) + # Digital/Compaq C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + sco*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + *) + ;; + esac + ;; + solaris*) + case $cc_basename in + CC) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC) + # Sun C++ 4.x + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc) + # Lucid + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC) + # NonStop-UX NCC 3.20 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + unixware*) + ;; + vxworks*) + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case "$cc_basename" in + xlc*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + esac + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + newsos6) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + linux*) + case $CC in + icc* | ecc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + ccc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + esac + ;; + + osf3* | osf4* | osf5*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + sco3.2v5*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' + ;; + + solaris*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sunos4*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + uts4*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then + AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], + _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), + [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +case "$host_os" in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" + ;; esac ]) -# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl convenience library and INCLTDL to the include flags for -# the libltdl header and adds --enable-ltdl-convenience to the -# configure arguments. Note that LIBLTDL and INCLTDL are not -# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not -# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed -# with '${top_builddir}/' and INCLTDL will be prefixed with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case "$enable_ltdl_convenience" in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; + +# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) +# ------------------------------------ +# See if the linker supports building shared libraries. +AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], +[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +ifelse([$1],[CXX],[ + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in + aix4* | aix5*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + else + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; + *) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac +],[ + runpath_var= + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)= + _LT_AC_TAGVAR(archive_expsym_cmds, $1)= + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= + _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown + _LT_AC_TAGVAR(hardcode_automatic, $1)=no + _LT_AC_TAGVAR(module_cmds, $1)= + _LT_AC_TAGVAR(module_expsym_cmds, $1)= + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_AC_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + openbsd*) + with_gnu_ld=no + ;; esac - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) -]) -# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl installable library and INCLTDL to the include flags for -# the libltdl header and adds --enable-ltdl-install to the configure -# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is -# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed -# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will -# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed -# with '${top_srcdir}/' (note the single quotes!). If your package is -# not flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, main, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + fi + ;; + + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris* | sysv5*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + sunos4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds" + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + if test $supports_anon_versioning = yes; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ +cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +$echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + else + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="$tmp_archive_cmds" + fi + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + fi else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - INCLTDL= + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + else + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds it's shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + # see comment about different semantics on the GNU ld section + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + bsdi[[45]]*) + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + darwin* | rhapsody*) + case "$host_os" in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case "$cc_basename" in + xlc*) + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi + ;; + + dgux*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + freebsd1*) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | kfreebsd*-gnu) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + + hpux10* | hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case "$host_cpu" in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + ;; + *) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + else + case $host_os in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + sco3.2v5*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ;; + + solaris*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + case $host_vendor in + sni) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4.3*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4.2uw2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; + + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + runpath_var='LD_RUN_PATH' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv5*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + ;; + + uts4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +# +# Do we need to explicitly link libc? +# +case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_AC_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_MSG_CHECKING([whether -lc should be explicitly linked in]) + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) + then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + else + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) + ;; + esac fi + ;; +esac +])# AC_LIBTOOL_PROG_LD_SHLIBS + + +# _LT_AC_FILE_LTDLL_C +# ------------------- +# Be careful that the start marker always follows a newline. +AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ +# /* ltdll.c starts here */ +# #define WIN32_LEAN_AND_MEAN +# #include +# #undef WIN32_LEAN_AND_MEAN +# #include +# +# #ifndef __CYGWIN__ +# # ifdef __CYGWIN32__ +# # define __CYGWIN__ __CYGWIN32__ +# # endif +# #endif +# +# #ifdef __cplusplus +# extern "C" { +# #endif +# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +# #ifdef __cplusplus +# } +# #endif +# +# #ifdef __CYGWIN__ +# #include +# DECLARE_CYGWIN_DLL( DllMain ); +# #endif +# HINSTANCE __hDllInstance_base; +# +# BOOL APIENTRY +# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +# { +# __hDllInstance_base = hInst; +# return TRUE; +# } +# /* ltdll.c ends here */ +])# _LT_AC_FILE_LTDLL_C + + +# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) +# --------------------------------- +AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) + + +# old names +AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) +AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) +AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) +AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) +AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) + +# This is just to silence aclocal about the macro not being used +ifelse([AC_DISABLE_FAST_INSTALL]) + +AC_DEFUN([LT_AC_PROG_GCJ], +[AC_CHECK_TOOL(GCJ, gcj, no) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS) ]) -dnl old names -AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl -AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl -AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl -AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl -AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl -AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl -AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl +AC_DEFUN([LT_AC_PROG_RC], +[AC_CHECK_TOOL(RC, windres, no) +]) -dnl This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL])dnl +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +# LT_AC_PROG_SED +# -------------- +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +AC_DEFUN([LT_AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && break + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_MSG_RESULT([$SED]) +]) # AC_LTDL_DLLIB @@ -1383,7 +6935,7 @@ dnl dnl If the compiler supports Run-Time Type Identification (typeinfo dnl header and typeid keyword), define HAVE_RTTI. dnl -dnl @version $Id: aclocal.m4,v 1.4 2004/12/27 11:31:01 hno Exp $ +dnl @version $Id: aclocal.m4,v 1.5 2004/12/27 12:08:30 hno Exp $ dnl @author Luc Maisonobe dnl AC_DEFUN([AC_CXX_RTTI], @@ -1420,7 +6972,7 @@ dnl and abi::__cxa_demangle() function), define HAVE_GCC_ABI_DEMANGLE dnl dnl Adapted from AC_CXX_RTTI by Luc Maisonobe dnl -dnl @version $Id: aclocal.m4,v 1.4 2004/12/27 11:31:01 hno Exp $ +dnl @version $Id: aclocal.m4,v 1.5 2004/12/27 12:08:30 hno Exp $ dnl @author Neil Ferguson dnl AC_DEFUN([AX_CXX_GCC_ABI_DEMANGLE], @@ -1487,7 +7039,7 @@ dnl dnl If the compiler can prevent names clashes using namespaces, define dnl HAVE_NAMESPACES. dnl -dnl @version $Id: aclocal.m4,v 1.4 2004/12/27 11:31:01 hno Exp $ +dnl @version $Id: aclocal.m4,v 1.5 2004/12/27 12:08:30 hno Exp $ dnl @author Luc Maisonobe dnl AC_DEFUN([AC_CXX_NAMESPACES], @@ -1510,7 +7062,7 @@ dnl dnl If the C++ library has a working stringstream, define HAVE_SSTREAM. dnl dnl @author Ben Stanley -dnl @version $Id: aclocal.m4,v 1.4 2004/12/27 11:31:01 hno Exp $ +dnl @version $Id: aclocal.m4,v 1.5 2004/12/27 12:08:30 hno Exp $ dnl AC_DEFUN([AC_CXX_HAVE_SSTREAM], [AC_CACHE_CHECK(whether the compiler has stringstream, @@ -1613,7 +7165,7 @@ dnl library (that has some headers) where some functionality is dnl dependent on the OS-features detected at compile-time. No dnl need to invent some "testpkg-confdefs.h.in" manually. :-) dnl -dnl @version $Id: aclocal.m4,v 1.4 2004/12/27 11:31:01 hno Exp $ +dnl @version $Id: aclocal.m4,v 1.5 2004/12/27 12:08:30 hno Exp $ dnl @author Guido Draheim AC_DEFUN([AC_CREATE_PREFIX_CONFIG_H], diff --git a/lib/cppunit-1.10.0/config/config.h.in b/lib/cppunit-1.10.0/config/config.h.in index 75756cf7fb..0a921df4a5 100644 --- a/lib/cppunit-1.10.0/config/config.h.in +++ b/lib/cppunit-1.10.0/config/config.h.in @@ -15,6 +15,9 @@ /* Define to 1 if you have the `dlerror' function. */ #undef HAVE_DLERROR +/* Define to 1 if you have the header file. */ +#undef HAVE_DLFCN_H + /* define if the compiler supports GCC C++ ABI name demangling */ #undef HAVE_GCC_ABI_DEMANGLE diff --git a/lib/cppunit-1.10.0/configure b/lib/cppunit-1.10.0/configure index 9648f59796..8a73befd41 100755 --- a/lib/cppunit-1.10.0/configure +++ b/lib/cppunit-1.10.0/configure @@ -241,6 +241,160 @@ IFS=" $as_nl" $as_unset CDPATH + +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` + ;; +esac + +echo=${ECHO-echo} +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "$0" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null 2>&1 && unset CDPATH + +if test -z "$ECHO"; then +if test "X${echo_test_string+set}" != Xset; then +# find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if (echo_test_string="`eval $cmd`") 2>/dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL $0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL $0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "$0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" +fi + + + + +tagnames=${tagnames+${tagnames},}CXX + +tagnames=${tagnames+${tagnames},}F77 + # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. @@ -309,7 +463,7 @@ ac_includes_default="\ # include #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CPPUNIT_MAJOR_VERSION CPPUNIT_MINOR_VERSION CPPUNIT_MICRO_VERSION CPPUNIT_INTERFACE_AGE CPPUNIT_BINARY_AGE CPPUNIT_VERSION LT_RELEASE LT_CURRENT LT_REVISION LT_AGE INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE am__leading_dot CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os RANLIB ac_ct_RANLIB LN_S LIBTOOL LIBADD_DL DOXYGEN DOT DOC_TRUE DOC_FALSE enable_dot enable_html_docs enable_latex_docs CXXCPP EGREP LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CPPUNIT_MAJOR_VERSION CPPUNIT_MINOR_VERSION CPPUNIT_MICRO_VERSION CPPUNIT_INTERFACE_AGE CPPUNIT_BINARY_AGE CPPUNIT_VERSION LT_RELEASE LT_CURRENT LT_REVISION LT_AGE INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE am__leading_dot CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CPP CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBADD_DL DOXYGEN DOT DOC_TRUE DOC_FALSE enable_dot enable_html_docs enable_latex_docs LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. @@ -774,10 +928,22 @@ ac_env_CXXFLAGS_set=${CXXFLAGS+set} ac_env_CXXFLAGS_value=$CXXFLAGS ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set} ac_cv_env_CXXFLAGS_value=$CXXFLAGS +ac_env_CPP_set=${CPP+set} +ac_env_CPP_value=$CPP +ac_cv_env_CPP_set=${CPP+set} +ac_cv_env_CPP_value=$CPP ac_env_CXXCPP_set=${CXXCPP+set} ac_env_CXXCPP_value=$CXXCPP ac_cv_env_CXXCPP_set=${CXXCPP+set} ac_cv_env_CXXCPP_value=$CXXCPP +ac_env_F77_set=${F77+set} +ac_env_F77_value=$F77 +ac_cv_env_F77_set=${F77+set} +ac_cv_env_F77_value=$F77 +ac_env_FFLAGS_set=${FFLAGS+set} +ac_env_FFLAGS_value=$FFLAGS +ac_cv_env_FFLAGS_set=${FFLAGS+set} +ac_cv_env_FFLAGS_value=$FFLAGS # # Report the --help message. @@ -861,9 +1027,12 @@ Optional Features: (and sometimes confusing) to the casual installer --disable-dependency-tracking Speeds up one-time builds --enable-dependency-tracking Do not reject slow dependency extractors - --enable-shared=PKGS build shared libraries default=yes - --enable-static=PKGS build static libraries default=yes - --enable-fast-install=PKGS optimize for fast installation default=yes + --enable-shared[=PKGS] + build shared libraries [default=yes] + --enable-static[=PKGS] + build static libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) --enable-doxygen enable documentation generation with doxygen (auto) --enable-dot use 'dot' to generate graphs in doxygen (auto) @@ -874,7 +1043,11 @@ Optional Features: Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-gnu-ld assume the C compiler uses GNU ld default=no + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-pic try to use only PIC/non-PIC objects [default=use + both] + --with-tags[=TAGS] + include additional configurations [automatic] Some influential environment variables: CC C compiler command @@ -885,7 +1058,10 @@ Some influential environment variables: headers in a nonstandard directory CXX C++ compiler command CXXFLAGS C++ compiler flags + CPP C preprocessor CXXCPP C++ preprocessor + F77 Fortran 77 compiler command + FFLAGS Fortran 77 compiler flags Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. @@ -3444,68 +3620,74 @@ ac_compiler_gnu=$ac_cv_cxx_compiler_gnu if test "${enable_shared+set}" = set; then enableval="$enable_shared" p=${PACKAGE-default} -case "$enableval" in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac else enable_shared=yes fi; + # Check whether --enable-static or --disable-static was given. if test "${enable_static+set}" = set; then enableval="$enable_static" p=${PACKAGE-default} -case "$enableval" in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac else enable_static=yes fi; + # Check whether --enable-fast-install or --disable-fast-install was given. if test "${enable_fast_install+set}" = set; then enableval="$enable_fast_install" p=${PACKAGE-default} -case "$enableval" in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac else enable_fast_install=yes fi; + # Make sure we can run config.sub. $ac_config_sub sun4 >/dev/null 2>&1 || { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 @@ -3560,85 +3742,77 @@ host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_RANLIB+set}" = set; then +echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 +echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6 +if test "${lt_cv_path_SED+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else + # Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done done +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && break + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done done -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 fi -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done +SED=$lt_cv_path_SED +echo "$as_me:$LINENO: result: $SED" >&5 +echo "${ECHO_T}$SED" >&6 - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -echo "${ECHO_T}$ac_ct_RANLIB" >&6 +echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +if test "${ac_cv_prog_egrep+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi fi +echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +echo "${ECHO_T}$ac_cv_prog_egrep" >&6 + EGREP=$ac_cv_prog_egrep - RANLIB=$ac_ct_RANLIB -else - RANLIB="$ac_cv_prog_RANLIB" -fi # Check whether --with-gnu-ld or --without-gnu-ld was given. @@ -3649,19 +3823,25 @@ else with_gnu_ld=no fi; ac_prog=ld -if test "$ac_cv_c_compiler_gnu" = yes; then +if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. - echo "$as_me:$LINENO: checking for ld used by GCC" >&5 -echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6 - ac_prog=`($CC -print-prog-name=ld) 2>&5` - case "$ac_prog" in + echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in # Accept absolute paths. - [\\/]* | [A-Za-z]:[\\/]*) + [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + # Canonicalize the pathname of ld + ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; @@ -3681,32 +3861,36 @@ else echo "$as_me:$LINENO: checking for non-GNU ld" >&5 echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 fi -if test "${ac_cv_path_LD+set}" = set; then +if test "${lt_cv_path_LD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do + IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - ac_cv_path_LD="$ac_dir/$ac_prog" + lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. - if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + case `"$lt_cv_path_LD" -v 2>&1 &5 echo "${ECHO_T}$LD" >&6 @@ -3719,56 +3903,94 @@ echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} { (exit 1); exit 1; }; } echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 -if test "${ac_cv_prog_gnu_ld+set}" = set; then +if test "${lt_cv_prog_gnu_ld+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - ac_cv_prog_gnu_ld=yes -else - ac_cv_prog_gnu_ld=no -fi +case `$LD -v 2>&1 &5 -echo "${ECHO_T}$ac_cv_prog_gnu_ld" >&6 +echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 +echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 +with_gnu_ld=$lt_cv_prog_gnu_ld +echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 +echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 +if test "${lt_cv_ld_reload_flag+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_ld_reload_flag='-r' +fi +echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 +echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + darwin*) + if test "$GCC" = yes; then + reload_cmds='$CC -nostdlib ${wl}-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac + echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6 -if test "${ac_cv_path_NM+set}" = set; then +if test "${lt_cv_path_NM+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$NM"; then # Let the user override the test. - ac_cv_path_NM="$NM" + lt_cv_path_NM="$NM" else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then + tmp_nm="$ac_dir/${ac_tool_prefix}nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" - break - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" break - else - ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + esac fi done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm + IFS="$lt_save_ifs" + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi fi - -NM="$ac_cv_path_NM" -echo "$as_me:$LINENO: result: $NM" >&5 -echo "${ECHO_T}$NM" >&6 +echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 +echo "${ECHO_T}$lt_cv_path_NM" >&6 +NM="$lt_cv_path_NM" echo "$as_me:$LINENO: checking whether ln -s works" >&5 echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 @@ -3781,20 +4003,192 @@ else echo "${ECHO_T}no, using $LN_S" >&6 fi +echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5 +echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6 +if test "${lt_cv_deplibs_check_method+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given extended regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix4* | aix5*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump'. + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | kfreebsd*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case "$host_cpu" in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux*) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +nto-qnx*) + lt_cv_deplibs_check_method=unknown + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +sco3.2v5*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; -case "$target" in -NONE) lt_target="$host" ;; -*) lt_target="$target" ;; +sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; esac -# Check for any special flags to pass to ltconfig. -libtool_flags="--cache-file=$cache_file" -test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" -test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" -test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" -test "$ac_cv_c_compiler_gnu" = yes && libtool_flags="$libtool_flags --with-gcc" -test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" +fi +echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 +echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# Allow CC to be a program name with arguments. +compiler=$CC # Check whether --enable-libtool-lock or --disable-libtool-lock was given. @@ -3802,31 +4196,109 @@ if test "${enable_libtool_lock+set}" = set; then enableval="$enable_libtool_lock" fi; -test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" -test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. -case "$lt_target" in -*-*-irix6*) +case $host in +ia64-*-hpux*) # Find out which ABI we are using. - echo '#line 3813 "configure"' > conftest.$ac_ext + echo 'int i;' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then - case "`/usr/bin/file conftest.o`" in - *32-bit*) - LD="${LD-ld} -32" + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" ;; - *N32*) - LD="${LD-ld} -n32" + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '#line 4225 "configure"' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case "`/usr/bin/file conftest.o`" in + *32-bit*) + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac fi rm -rf conftest* ;; @@ -3840,7 +4312,13 @@ echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 if test "${lt_cv_cc_needs_belf+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat >conftest.$ac_ext <<_ACEOF + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext @@ -3864,7 +4342,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 @@ -3886,6 +4364,12 @@ lt_cv_cc_needs_belf=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + fi echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 @@ -3895,351 +4379,250 @@ echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 fi ;; - esac +need_locks="$enable_libtool_lock" -# Save cache, so that ltconfig can load it -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -{ - (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} | - sed ' - t clear - : clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - : end' >>confcache -if diff $cache_file confcache >/dev/null 2>&1; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" - cat confcache >$cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -# Actually configure libtool. ac_aux_dir is where install-sh is found. -CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ -LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ -DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ -${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ -|| { { echo "$as_me:$LINENO: error: libtool configure failed" >&5 -echo "$as_me: error: libtool configure failed" >&2;} - { (exit 1); exit 1; }; } -# Reload cache, that may have been modified by ltconfig -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . $cache_file;; - *) . ./$cache_file;; - esac - fi -else - { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= fi - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - -# Redirect the config.log output again, so that the ltconfig log is not -# clobbered by the next message. -exec 5>>./config.log - - -# check for dlopen,dlsym... or shl_load, shl_findsym... -LIBADD_DL= - - -echo "$as_me:$LINENO: checking for shl_load" >&5 -echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 -if test "${ac_cv_func_shl_load+set}" = set; then +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Define shl_load to an innocuous variant, in case declares shl_load. - For example, HP-UX 11i declares gettimeofday. */ -#define shl_load innocuous_shl_load - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - #ifdef __STDC__ # include #else # include #endif - -#undef shl_load - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_shl_load) || defined (__stub___shl_load) -choke me -#else -char (*f) () = shl_load; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != shl_load; - ; - return 0; -} + Syntax error _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_shl_load=yes + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_func_shl_load=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + # Broken: fails on valid input. +continue fi -echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -echo "${ECHO_T}$ac_cv_func_shl_load" >&6 -if test $ac_cv_func_shl_load = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_SHL_LOAD 1 -_ACEOF +rm -f conftest.err conftest.$ac_ext -else - echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -int -main () -{ -shl_load (); - ; - return 0; -} +#include _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_shl_load=yes + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_dld_shl_load=no + # Passes both tests. +ac_preproc_ok=: +break fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 -if test $ac_cv_lib_dld_shl_load = yes; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_SHL_LOAD 1 -_ACEOF + done + ac_cv_prog_CPP=$CPP - LIBADD_DL="$LIBADD_DL -ldld" -else - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +fi + CPP=$ac_cv_prog_CPP else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF + ac_cv_prog_CPP=$CPP +fi +echo "$as_me:$LINENO: result: $CPP" >&5 +echo "${ECHO_T}$CPP" >&6 +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" +#ifdef __STDC__ +# include +#else +# include #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} + Syntax error _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dl_dlopen=yes + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_dl_dlopen=no + # Passes both tests. +ac_preproc_ok=: +break fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_LIBDL 1 -_ACEOF +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu - LIBADD_DL="-ldl" + +echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ @@ -4247,222 +4630,178 @@ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#if HAVE_DLFCN_H -# include -#endif +#include +#include +#include +#include int main () { -dlopen(0, 0); + ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_LIBDL 1 -_ACEOF - + ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 -if test "${ac_cv_lib_svld_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat >conftest.$ac_ext <<_ACEOF +ac_cv_header_stdc=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ +#include -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_svld_dlopen=yes +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_svld_dlopen=no + ac_cv_header_stdc=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS +rm -f conftest* + fi -echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 -if test $ac_cv_lib_svld_dlopen = yes; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_LIBDL 1 +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ _ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include - LIBADD_DL="-lsvld" +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : else - echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_dld_link+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dld_link (); + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { -dld_link (); - ; - return 0; + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + exit(2); + exit (0); } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext +rm -f conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_lib_dld_dld_link=yes + : else - echo "$as_me: failed program was:" >&5 + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_dld_dld_link=no +( exit $ac_status ) +ac_cv_header_stdc=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 -if test $ac_cv_lib_dld_dld_link = yes; then +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6 +if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF -#define HAVE_DLD 1 +#define STDC_HEADERS 1 _ACEOF - LIBADD_DL="$LIBADD_DL -ldld" - -fi - - fi +# On IRIX 5.3, sys/types and inttypes.h are conflicting. -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -fi -fi -if test "x$ac_cv_func_dlopen" = xyes || test "x$ac_cv_lib_dl_dlopen" = xyes; then - LIBS_SAVE="$LIBS" - LIBS="$LIBS $LIBADD_DL" -for ac_func in dlerror +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h do -as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 -if eval "test \"\${$as_ac_var+set}\" = set"; then +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF @@ -4471,269 +4810,14747 @@ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -char (*f) () = $ac_func; -#endif -#ifdef __cplusplus -} -#endif +$ac_includes_default -int -main () -{ -return f != $ac_func; - ; - return 0; -} +#include <$ac_header> _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - eval "$as_ac_var=yes" + eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -eval "$as_ac_var=no" +eval "$as_ac_Header=no" fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 -if test `eval echo '${'$as_ac_var'}'` = yes; then +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi -done - - LIBS="$LIBS_SAVE" -fi - - -# check for doxygen -# Check whether --enable-doxygen or --disable-doxygen was given. -if test "${enable_doxygen+set}" = set; then - enableval="$enable_doxygen" +done -fi; -# Check whether --enable-dot or --disable-dot was given. -if test "${enable_dot+set}" = set; then - enableval="$enable_dot" -fi; -# Check whether --enable-html-docs or --disable-html-docs was given. -if test "${enable_html_docs+set}" = set; then - enableval="$enable_html_docs" +for ac_header in dlfcn.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else - enable_html_docs=yes -fi; -# Check whether --enable-latex-docs or --disable-latex-docs was given. -if test "${enable_latex_docs+set}" = set; then - enableval="$enable_latex_docs" + # Is the header compilable? +echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 +# Is the header present? +echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi else - enable_latex_docs=no -fi; -if test "x$enable_doxygen" = xno; then - enable_doc=no + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes else - # Extract the first word of "doxygen", so it can be a program name with args. -set dummy doxygen; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_path_DOXYGEN+set}" = set; then + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------------ ## +## Report this to the AC_PACKAGE_NAME lists. ## +## ------------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - case $DOXYGEN in - [\\/]* | ?:[\\/]*) - ac_cv_path_DOXYGEN="$DOXYGEN" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_DOXYGEN="$as_dir/$ac_word$ac_exec_ext" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done + eval "$as_ac_Header=\$ac_header_preproc" +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - ;; -esac fi -DOXYGEN=$ac_cv_path_DOXYGEN +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF -if test -n "$DOXYGEN"; then - echo "$as_me:$LINENO: result: $DOXYGEN" >&5 -echo "${ECHO_T}$DOXYGEN" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 fi - if test "x$DOXYGEN" = x; then - if test "x$enable_doxygen" = xyes; then - { { echo "$as_me:$LINENO: error: could not find doxygen" >&5 -echo "$as_me: error: could not find doxygen" >&2;} - { (exit 1); exit 1; }; } - fi - enable_doc=no - else - enable_doc=yes - # Extract the first word of "dot", so it can be a program name with args. -set dummy dot; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_path_DOT+set}" = set; then +done + + + +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 +echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6 +if test -z "$CXXCPP"; then + if test "${ac_cv_prog_CXXCPP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - case $DOT in - [\\/]* | ?:[\\/]*) - ac_cv_path_DOT="$DOT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH + # Double quotes because CXXCPP needs to be expanded + for CXXCPP in "$CXX -E" "/lib/cpp" + do + ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_DOT="$as_dir/$ac_word$ac_exec_ext" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_cxx_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag + else + ac_cpp_err= fi -done -done - - ;; -esac -fi -DOT=$ac_cv_path_DOT +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_cxx_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CXXCPP=$CXXCPP + +fi + CXXCPP=$ac_cv_prog_CXXCPP +else + ac_cv_prog_CXXCPP=$CXXCPP +fi +echo "$as_me:$LINENO: result: $CXXCPP" >&5 +echo "${ECHO_T}$CXXCPP" >&6 +ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_cxx_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_cxx_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +fi + + +ac_ext=f +ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' +ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_f77_compiler_gnu +if test -n "$ac_tool_prefix"; then + for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$F77"; then + ac_cv_prog_F77="$F77" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_F77="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +F77=$ac_cv_prog_F77 +if test -n "$F77"; then + echo "$as_me:$LINENO: result: $F77" >&5 +echo "${ECHO_T}$F77" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$F77" && break + done +fi +if test -z "$F77"; then + ac_ct_F77=$F77 + for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_F77"; then + ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_F77="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_F77=$ac_cv_prog_ac_ct_F77 +if test -n "$ac_ct_F77"; then + echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 +echo "${ECHO_T}$ac_ct_F77" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$ac_ct_F77" && break +done + + F77=$ac_ct_F77 +fi + + +# Provide some information about the compiler. +echo "$as_me:5340:" \ + "checking for Fortran 77 compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 + (eval $ac_compiler --version &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 + (eval $ac_compiler -v &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 + (eval $ac_compiler -V &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +rm -f a.out + +# If we don't use `.F' as extension, the preprocessor is not run on the +# input file. (Note that this only needs to work for GNU compilers.) +ac_save_ext=$ac_ext +ac_ext=F +echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6 +if test "${ac_cv_f77_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF + program main +#ifndef __GNUC__ + choke me +#endif + + end +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_f77_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_compiler_gnu=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_compiler_gnu=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_f77_compiler_gnu=$ac_compiler_gnu + +fi +echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6 +ac_ext=$ac_save_ext +ac_test_FFLAGS=${FFLAGS+set} +ac_save_FFLAGS=$FFLAGS +FFLAGS= +echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 +echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_f77_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + FFLAGS=-g +cat >conftest.$ac_ext <<_ACEOF + program main + + end +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_f77_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_f77_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_prog_f77_g=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 +echo "${ECHO_T}$ac_cv_prog_f77_g" >&6 +if test "$ac_test_FFLAGS" = set; then + FFLAGS=$ac_save_FFLAGS +elif test $ac_cv_prog_f77_g = yes; then + if test "x$ac_cv_f77_compiler_gnu" = xyes; then + FFLAGS="-g -O2" + else + FFLAGS="-g" + fi +else + if test "x$ac_cv_f77_compiler_gnu" = xyes; then + FFLAGS="-O2" + else + FFLAGS= + fi +fi + +G77=`test $ac_compiler_gnu = yes && echo yes` +ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + + + +# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! + +# find the maximum length of command line arguments +echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 +echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6 +if test "${lt_cv_sys_max_cmd_len+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* ) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for *BSD + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + ;; + + *) + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ + = "XX$teststring") >/dev/null 2>&1 && + new_result=`expr "X$teststring" : ".*" 2>&1` && + lt_cv_sys_max_cmd_len=$new_result && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + teststring= + # Add a significant safety factor because C++ compilers can tack on massive + # amounts of additional arguments before passing them to the linker. + # It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + ;; + esac + +fi + +if test -n $lt_cv_sys_max_cmd_len ; then + echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 +echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6 +else + echo "$as_me:$LINENO: result: none" >&5 +echo "${ECHO_T}none" >&6 +fi + + + + +# Check for command to grab the raw symbol name followed by C symbol from nm. +echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 +echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6 +if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Transform the above into a raw symbol and a C symbol. +symxfrm='\1 \2\3 \3' + +# Transform an extracted symbol line into a proper C declaration +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32*) + symcode='[ABCDGISTW]' + ;; +hpux*) # Its linker distinguishes data from code symbols + if test "$host_cpu" = ia64; then + symcode='[ABCDEGRST]' + fi + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDGIRSTW]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris* | sysv5*) + symcode='[BDRT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + # Write the raw and C identifiers. + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 + (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if grep ' nm_test_var$' "$nlist" >/dev/null; then + if grep ' nm_test_func$' "$nlist" >/dev/null; then + cat < conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' + + cat <> conftest.$ac_ext +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +lt_preloaded_symbols[] = +{ +EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr_t) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -f conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done + +fi + +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + echo "$as_me:$LINENO: result: failed" >&5 +echo "${ECHO_T}failed" >&6 +else + echo "$as_me:$LINENO: result: ok" >&5 +echo "${ECHO_T}ok" >&6 +fi + +echo "$as_me:$LINENO: checking for objdir" >&5 +echo $ECHO_N "checking for objdir... $ECHO_C" >&6 +if test "${lt_cv_objdir+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 +echo "${ECHO_T}$lt_cv_objdir" >&6 +objdir=$lt_cv_objdir + + + + + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e s/^X//' +sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +# Constants: +rm="rm -f" + +# Global variables: +default_ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except M$VC, +# which needs '.lib'). +libext=a +ltmain="$ac_aux_dir/ltmain.sh" +ofile="$default_ofile" +with_gnu_ld="$lt_cv_prog_gnu_ld" + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + echo "$as_me:$LINENO: result: $AR" >&5 +echo "${ECHO_T}$AR" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false" +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +echo "${ECHO_T}$ac_ct_AR" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + AR=$ac_ct_AR +else + AR="$ac_cv_prog_AR" +fi + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + RANLIB=$ac_ct_RANLIB +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + echo "$as_me:$LINENO: result: $STRIP" >&5 +echo "${ECHO_T}$STRIP" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +echo "${ECHO_T}$ac_ct_STRIP" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + STRIP=$ac_ct_STRIP +else + STRIP="$ac_cv_prog_STRIP" +fi + + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AS" && AS=as +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LD" && LD=ld +test -z "$LN_S" && LN_S="ln -s" +test -z "$MAGIC_CMD" && MAGIC_CMD=file +test -z "$NM" && NM=nm +test -z "$SED" && SED=sed +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$RANLIB" && RANLIB=: +test -z "$STRIP" && STRIP=: +test -z "$ac_objext" && ac_objext=o + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" + ;; + *) + old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` + +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 +echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +echo "${ECHO_T}$MAGIC_CMD" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + echo "$as_me:$LINENO: checking for file" >&5 +echo $ECHO_N "checking for file... $ECHO_C" >&6 +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +echo "${ECHO_T}$MAGIC_CMD" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +enable_dlopen=no +enable_win32_dll=no + +# Check whether --enable-libtool-lock or --disable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then + enableval="$enable_libtool_lock" + +fi; +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + + +# Check whether --with-pic or --without-pic was given. +if test "${with_pic+set}" = set; then + withval="$with_pic" + pic_mode="$withval" +else + pic_mode=default +fi; +test -z "$pic_mode" && pic_mode=default + +# Use C for the default configuration in the libtool script +tagname= +lt_save_CC="$CC" +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +objext=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}\n' + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# +# Check for any special shared library compilation flags. +# +lt_prog_cc_shlib= +if test "$GCC" = no; then + case $host_os in + sco3.2v5*) + lt_prog_cc_shlib='-belf' + ;; + esac +fi +if test -n "$lt_prog_cc_shlib"; then + { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&5 +echo "$as_me: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&2;} + if echo "$old_CC $old_CFLAGS " | grep "[ ]$lt_prog_cc_shlib[ ]" >/dev/null; then : + else + { echo "$as_me:$LINENO: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5 +echo "$as_me: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;} + lt_cv_prog_cc_can_build_shared=no + fi +fi + + +# +# Check to make sure the static flag actually works. +# +echo "$as_me:$LINENO: checking if $compiler static flag $lt_prog_compiler_static works" >&5 +echo $ECHO_N "checking if $compiler static flag $lt_prog_compiler_static works... $ECHO_C" >&6 +if test "${lt_prog_compiler_static_works+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_prog_compiler_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_prog_compiler_static" + printf "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + else + lt_prog_compiler_static_works=yes + fi + fi + $rm conftest* + LDFLAGS="$save_LDFLAGS" + +fi +echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5 +echo "${ECHO_T}$lt_prog_compiler_static_works" >&6 + +if test x"$lt_prog_compiler_static_works" = xyes; then + : +else + lt_prog_compiler_static= +fi + + + + +lt_prog_compiler_no_builtin_flag= + +if test "$GCC" = yes; then + lt_prog_compiler_no_builtin_flag=' -fno-builtin' + + +echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 +if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:6397: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:6401: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s conftest.err; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $rm conftest* + +fi +echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 + +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : +fi + +fi + +lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= + +echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case "$cc_basename" in + xlc*) + lt_prog_compiler_pic='-qnocommon' + lt_prog_compiler_wl='-Wl,' + ;; + esac + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; + + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + linux*) + case $CC in + icc* | ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + esac + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + + sco3.2v5*) + lt_prog_compiler_pic='-Kpic' + lt_prog_compiler_static='-dn' + ;; + + solaris*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; + + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi + +echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 +echo "${ECHO_T}$lt_prog_compiler_pic" >&6 + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + +echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6 +if test "${lt_prog_compiler_pic_works+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:6640: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:6644: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s conftest.err; then + lt_prog_compiler_pic_works=yes + fi + fi + $rm conftest* + +fi +echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5 +echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6 + +if test x"$lt_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi + +fi +case "$host_os" in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac + +echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 +if test "${lt_cv_prog_compiler_c_o+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_prog_compiler_c_o=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:6700: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:6704: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s out/conftest.err; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* + +fi +echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + echo "$as_me:$LINENO: result: $hard_links" >&5 +echo "${ECHO_T}$hard_links" >&6 + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + +echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 + + runpath_var= + allow_undefined_flag= + enable_shared_with_static_runtimes=no + archive_cmds= + archive_expsym_cmds= + old_archive_From_new_cmds= + old_archive_from_expsyms_cmds= + export_dynamic_flag_spec= + whole_archive_flag_spec= + thread_safe_flag_spec= + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld= + hardcode_libdir_separator= + hardcode_direct=no + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + link_all_deplibs=unknown + hardcode_automatic=no + module_cmds= + module_expsym_cmds= + always_export_symbols=no + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + ld_shlibs=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + fi + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + ld_shlibs=no + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris* | sysv5*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds="$tmp_archive_cmds" + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + if test $supports_anon_versioning = yes; then + archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ +cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +$echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + else + archive_expsym_cmds="$tmp_archive_cmds" + fi + else + ld_shlibs=no + fi + ;; + + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = yes; then + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds='' + hardcode_direct=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + + if test "$GCC" = yes; then + case $host_os in aix4.012|aix4.012.*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct=yes + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' ${wl}-bernotok' + allow_undefined_flag=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + always_export_symbols=yes + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec=' ' + archive_cmds_need_lc=yes + # This is similar to how AIX traditionally builds it's shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + # see comment about different semantics on the GNU ld section + ld_shlibs=no + ;; + + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_From_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes=yes + ;; + + darwin* | rhapsody*) + case "$host_os" in + rhapsody* | darwin1.[012]) + allow_undefined_flag='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + whole_archive_flag_spec='' + link_all_deplibs=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case "$cc_basename" in + xlc*) + output_verbose_link_cmd='echo' + archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + ld_shlibs=no + ;; + esac + fi + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + freebsd1*) + ld_shlibs=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | kfreebsd*-gnu) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9*) + if test "$GCC" = yes; then + archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' + ;; + + hpux10* | hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*|ia64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case "$host_cpu" in + hppa*64*|ia64*) + archive_cmds='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' + ;; + *) + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*) + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec_ld='+b $libdir' + hardcode_libdir_separator=: + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + ia64*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=no + hardcode_shlibpath_var=no + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + *) + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + export_dynamic_flag_spec='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_ld='-rpath $libdir' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + link_all_deplibs=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + openbsd*) + hardcode_direct=yes + hardcode_shlibpath_var=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + hardcode_libdir_separator=: + ;; + + sco3.2v5*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='${wl}-Bexport' + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ;; + + solaris*) + no_undefined_flag=' -z text' + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4.2uw2*) + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=no + hardcode_shlibpath_var=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; + + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) + no_undefined_flag='${wl}-z ${wl}text' + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv5*) + no_undefined_flag=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + hardcode_libdir_flag_spec= + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + fi + +echo "$as_me:$LINENO: result: $ld_shlibs" >&5 +echo "${ECHO_T}$ld_shlibs" >&6 +test "$ld_shlibs" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc=no + else + archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 +echo "${ECHO_T}$archive_cmds_need_lc" >&6 + ;; + esac + fi + ;; +esac + +echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix4* | aix5*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +kfreebsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.01* | freebsdelf3.01*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + *) # from 3.2 on + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case "$host_cpu" in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +echo "${ECHO_T}$dynamic_linker" >&6 +test "$dynamic_linker" = no && can_build_shared=no + +echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || \ + test -n "$runpath_var" || \ + test "X$hardcode_automatic" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +echo "$as_me:$LINENO: result: $hardcode_action" >&5 +echo "${ECHO_T}$hardcode_action" >&6 + +if test "$hardcode_action" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + +striplib= +old_striplib= +echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + ;; + *) + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + ;; + esac +fi + +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dl_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dl_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + + *) + echo "$as_me:$LINENO: checking for shl_load" >&5 +echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 +if test "${ac_cv_func_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define shl_load to an innocuous variant, in case declares shl_load. + For example, HP-UX 11i declares gettimeofday. */ +#define shl_load innocuous_shl_load + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char shl_load (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef shl_load + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_shl_load) || defined (__stub___shl_load) +choke me +#else +char (*f) () = shl_load; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != shl_load; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_shl_load=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_shl_load=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +echo "${ECHO_T}$ac_cv_func_shl_load" >&6 +if test $ac_cv_func_shl_load = yes; then + lt_cv_dlopen="shl_load" +else + echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 +if test "${ac_cv_lib_dld_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load (); +int +main () +{ +shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dld_shl_load=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dld_shl_load=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +if test $ac_cv_lib_dld_shl_load = yes; then + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" +else + echo "$as_me:$LINENO: checking for dlopen" >&5 +echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 +if test "${ac_cv_func_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define dlopen to an innocuous variant, in case declares dlopen. + For example, HP-UX 11i declares gettimeofday. */ +#define dlopen innocuous_dlopen + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char dlopen (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef dlopen + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_dlopen) || defined (__stub___dlopen) +choke me +#else +char (*f) () = dlopen; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != dlopen; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +echo "${ECHO_T}$ac_cv_func_dlopen" >&6 +if test $ac_cv_func_dlopen = yes; then + lt_cv_dlopen="dlopen" +else + echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dl_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dl_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 +if test "${ac_cv_lib_svld_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_svld_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_svld_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 +if test $ac_cv_lib_svld_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 +if test "${ac_cv_lib_dld_dld_link+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dld_link (); +int +main () +{ +dld_link (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dld_dld_link=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dld_dld_link=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 +if test $ac_cv_lib_dld_dld_link = yes; then + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 +if test "${lt_cv_dlopen_self+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +} +EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_unknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +echo "${ECHO_T}$lt_cv_dlopen_self" >&6 + + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 +if test "${lt_cv_dlopen_self_static+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +} +EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + +# Report which librarie types wil actually be built +echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 +echo "$as_me:$LINENO: result: $can_build_shared" >&5 +echo "${ECHO_T}$can_build_shared" >&6 + +echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + +aix4* | aix5*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; +esac +echo "$as_me:$LINENO: result: $enable_shared" >&5 +echo "${ECHO_T}$enable_shared" >&6 + +echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +echo "$as_me:$LINENO: result: $enable_static" >&5 +echo "${ECHO_T}$enable_static" >&6 + +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + compiler \ + CC \ + LD \ + lt_prog_compiler_wl \ + lt_prog_compiler_pic \ + lt_prog_compiler_static \ + lt_prog_compiler_no_builtin_flag \ + export_dynamic_flag_spec \ + thread_safe_flag_spec \ + whole_archive_flag_spec \ + enable_shared_with_static_runtimes \ + old_archive_cmds \ + old_archive_from_new_cmds \ + predep_objects \ + postdep_objects \ + predeps \ + postdeps \ + compiler_lib_search_path \ + archive_cmds \ + archive_expsym_cmds \ + postinstall_cmds \ + postuninstall_cmds \ + old_archive_from_expsyms_cmds \ + allow_undefined_flag \ + no_undefined_flag \ + export_symbols_cmds \ + hardcode_libdir_flag_spec \ + hardcode_libdir_flag_spec_ld \ + hardcode_libdir_separator \ + hardcode_automatic \ + module_cmds \ + module_expsym_cmds \ + lt_cv_prog_compiler_c_o \ + exclude_expsyms \ + include_expsyms; do + + case $var in + old_archive_cmds | \ + old_archive_from_new_cmds | \ + archive_cmds | \ + archive_expsym_cmds | \ + module_cmds | \ + module_expsym_cmds | \ + old_archive_from_expsyms_cmds | \ + export_symbols_cmds | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac + +cfgfile="${ofile}T" + trap "$rm \"$cfgfile\"; exit 1" 1 2 15 + $rm -f "$cfgfile" + { echo "$as_me:$LINENO: creating $ofile" >&5 +echo "$as_me: creating $ofile" >&6;} + + cat <<__EOF__ >> "$cfgfile" +#! $SHELL + +# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. +# +# This file is part of GNU Libtool: +# Originally by Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="$SED -e s/^X//" + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# The names of the tagged configurations supported by this script. +available_tags= + +# ### BEGIN LIBTOOL CONFIG + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# A language-specific compiler. +CC=$lt_compiler + +# Is the compiler the GNU C compiler? +with_gcc=$GCC + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_LD + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +# Must we lock files when doing compilation ? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path" + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# ### END LIBTOOL CONFIG + +__EOF__ + + + case $host_os in + aix3*) + cat <<\EOF >> "$cfgfile" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + esac + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || \ + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi + + +ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +CC="$lt_save_CC" + + +# Check whether --with-tags or --without-tags was given. +if test "${with_tags+set}" = set; then + withval="$with_tags" + tagnames="$withval" +fi; + +if test -f "$ltmain" && test -n "$tagnames"; then + if test ! -f "${ofile}"; then + { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5 +echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;} + fi + + if test -z "$LTCC"; then + eval "`$SHELL ${ofile} --config | grep '^LTCC='`" + if test -z "$LTCC"; then + { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5 +echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;} + else + { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5 +echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} + fi + fi + + # Extract list of available tagged configurations in $ofile. + # Note that this assumes the entire list is on one line. + available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` + + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for tagname in $tagnames; do + IFS="$lt_save_ifs" + # Check whether tagname contains only valid characters + case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in + "") ;; + *) { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5 +echo "$as_me: error: invalid tag name: $tagname" >&2;} + { (exit 1); exit 1; }; } + ;; + esac + + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null + then + { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5 +echo "$as_me: error: tag name \"$tagname\" already exists" >&2;} + { (exit 1); exit 1; }; } + fi + + # Update the list of available tags. + if test -n "$tagname"; then + echo appending configuration tag \"$tagname\" to $ofile + + case $tagname in + CXX) + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + + + + +archive_cmds_need_lc_CXX=no +allow_undefined_flag_CXX= +always_export_symbols_CXX=no +archive_expsym_cmds_CXX= +export_dynamic_flag_spec_CXX= +hardcode_direct_CXX=no +hardcode_libdir_flag_spec_CXX= +hardcode_libdir_flag_spec_ld_CXX= +hardcode_libdir_separator_CXX= +hardcode_minus_L_CXX=no +hardcode_automatic_CXX=no +module_cmds_CXX= +module_expsym_cmds_CXX= +link_all_deplibs_CXX=unknown +old_archive_cmds_CXX=$old_archive_cmds +no_undefined_flag_CXX= +whole_archive_flag_spec_CXX= +enable_shared_with_static_runtimes_CXX=no + +# Dependencies to place before and after the object being linked: +predep_objects_CXX= +postdep_objects_CXX= +predeps_CXX= +postdeps_CXX= +compiler_lib_search_path_CXX= + +# Source file extension for C++ test sources. +ac_ext=cc + +# Object file extension for compiled C++ test sources. +objext=o +objext_CXX=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(int, char *) { return(0); }\n' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_LD=$LD +lt_save_GCC=$GCC +GCC=$GXX +lt_save_with_gnu_ld=$with_gnu_ld +lt_save_path_LD=$lt_cv_path_LD +if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +else + unset lt_cv_prog_gnu_ld +fi +if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX +else + unset lt_cv_path_LD +fi +test -z "${LDCXX+set}" || LD=$LDCXX +CC=${CXX-"c++"} +compiler=$CC +compiler_CXX=$CC +cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` + +# We don't want -fno-exception wen compiling C++ code, so set the +# no_builtin_flag separately +if test "$GXX" = yes; then + lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' +else + lt_prog_compiler_no_builtin_flag_CXX= +fi + +if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + +# Check whether --with-gnu-ld or --without-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then + withval="$with_gnu_ld" + test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi; +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + echo "$as_me:$LINENO: checking for GNU ld" >&5 +echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 +else + echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 +fi +if test "${lt_cv_path_LD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +echo "${ECHO_T}$LD" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi +test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 +if test "${lt_cv_prog_gnu_ld+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # I'd rather use --version here, but apparently some GNU ld's only accept -v. +case `$LD -v 2>&1 &5 +echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ + grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec_CXX= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + +else + GXX=no + with_gnu_ld=no + wlarc= +fi + +# PORTME: fill in a description of your system's C++ link characteristics +echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 +ld_shlibs_CXX=yes +case $host_os in + aix3*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix5*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds_CXX='' + hardcode_direct_CXX=yes + hardcode_libdir_separator_CXX=':' + link_all_deplibs_CXX=yes + + if test "$GXX" = yes; then + case $host_os in aix4.012|aix4.012.*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct_CXX=yes + else + # We have old collect2 + hardcode_direct_CXX=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L_CXX=yes + hardcode_libdir_flag_spec_CXX='-L$libdir' + hardcode_libdir_separator_CXX= + fi + esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols_CXX=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag_CXX='-berok' + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + + archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag_CXX="-z nodefs" + archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag_CXX=' ${wl}-bernotok' + allow_undefined_flag_CXX=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + always_export_symbols_CXX=yes + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec_CXX=' ' + archive_cmds_need_lc_CXX=yes + # This is similar to how AIX traditionally builds it's shared libraries. + archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec_CXX='-L$libdir' + allow_undefined_flag_CXX=unsupported + always_export_symbols_CXX=no + enable_shared_with_static_runtimes_CXX=yes + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + ld_shlibs_CXX=no + fi + ;; + darwin* | rhapsody*) + case "$host_os" in + rhapsody* | darwin1.[012]) + allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + archive_cmds_need_lc_CXX=no + hardcode_direct_CXX=no + hardcode_automatic_CXX=yes + hardcode_shlibpath_var_CXX=unsupported + whole_archive_flag_spec_CXX='' + link_all_deplibs_CXX=yes + + if test "$GXX" = yes ; then + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + else + archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + fi + module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case "$cc_basename" in + xlc*) + output_verbose_link_cmd='echo' + archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + ld_shlibs_CXX=no + ;; + esac + fi + ;; + + dgux*) + case $cc_basename in + ec++) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + ghcx) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + freebsd12*) + # C++ shared libraries reported to be fairly broken before switch to ELF + ld_shlibs_CXX=no + ;; + freebsd-elf*) + archive_cmds_need_lc_CXX=no + ;; + freebsd* | kfreebsd*-gnu) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + ld_shlibs_CXX=yes + ;; + gnu*) + ;; + hpux9*) + hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_CXX=: + export_dynamic_flag_spec_CXX='${wl}-E' + hardcode_direct_CXX=yes + hardcode_minus_L_CXX=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aCC) + archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + case "$host_cpu" in + hppa*64*) + hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec_ld_CXX='+b $libdir' + hardcode_libdir_separator_CXX=: + ;; + ia64*) + hardcode_libdir_flag_spec_CXX='-L$libdir' + ;; + *) + hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_CXX=: + export_dynamic_flag_spec_CXX='${wl}-E' + ;; + esac + fi + case "$host_cpu" in + hppa*64*) + hardcode_direct_CXX=no + hardcode_shlibpath_var_CXX=no + ;; + ia64*) + hardcode_direct_CXX=no + hardcode_shlibpath_var_CXX=no + hardcode_minus_L_CXX=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + *) + hardcode_direct_CXX=yes + hardcode_minus_L_CXX=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aCC) + case "$host_cpu" in + hppa*64*|ia64*) + archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + ;; + *) + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case "$host_cpu" in + ia64*|hppa*64*) + archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + ;; + *) + archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + irix5* | irix6*) + case $cc_basename in + CC) + # SGI C++ + archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + else + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + fi + fi + link_all_deplibs_CXX=yes + ;; + esac + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + ;; + linux*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + archive_cmds_need_lc_CXX=no + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + cxx) + # Compaq C++ + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec_CXX='-rpath $libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + esac + ;; + lynxos*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + m88k*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + mvs*) + case $cc_basename in + cxx) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + hardcode_libdir_flag_spec_CXX='-R$libdir' + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + openbsd2*) + # C++ shared libraries are fairly broken + ld_shlibs_CXX=no + ;; + openbsd*) + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no + archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + export_dynamic_flag_spec_CXX='${wl}-E' + whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd='echo' + ;; + osf3*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + hardcode_libdir_separator_CXX=: + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' + + ;; + RCC) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + cxx) + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + osf4* | osf5*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + hardcode_libdir_separator_CXX=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' + ;; + RCC) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + cxx) + allow_undefined_flag_CXX=' -expect_unresolved \*' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ + $rm $lib.exp' + + hardcode_libdir_flag_spec_CXX='-rpath $libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + psos*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + sco*) + archive_cmds_need_lc_CXX=no + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + lcc) + # Lucid + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + solaris*) + case $cc_basename in + CC) + # Sun C++ 4.2, 5.x and Centerline C++ + no_undefined_flag_CXX=' -zdefs' + archive_cmds_CXX='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + hardcode_libdir_flag_spec_CXX='-R$libdir' + hardcode_shlibpath_var_CXX=no + case $host_os in + solaris2.0-5 | solaris2.0-5.*) ;; + *) + # The C++ compiler is used as linker so we must use $wl + # flag to pass the commands to the underlying system + # linker. + # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + link_all_deplibs_CXX=yes + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[LR]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' + ;; + gcx) + # Green Hills C++ Compiler + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + no_undefined_flag_CXX=' ${wl}-z ${wl}defs' + if $CC --version | grep -v '^2\.7' > /dev/null; then + archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + fi + + hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' + fi + ;; + esac + ;; + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) + archive_cmds_need_lc_CXX=no + ;; + tandem*) + case $cc_basename in + NCC) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + vxworks*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; +esac +echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 +echo "${ECHO_T}$ld_shlibs_CXX" >&6 +test "$ld_shlibs_CXX" = no && can_build_shared=no + +GCC_CXX="$GXX" +LD_CXX="$LD" + + +cat > conftest.$ac_ext <&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + # The `*' in the case matches for architectures that use `case' in + # $output_verbose_cmd can trigger glob expansion during the loop + # eval without this substitution. + output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`" + + for p in `eval $output_verbose_link_cmd`; do + case $p in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" \ + || test $p = "-R"; then + prev=$p + continue + else + prev= + fi + + if test "$pre_test_object_deps_done" = no; then + case $p in + -L* | -R*) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$compiler_lib_search_path_CXX"; then + compiler_lib_search_path_CXX="${prev}${p}" + else + compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$postdeps_CXX"; then + postdeps_CXX="${prev}${p}" + else + postdeps_CXX="${postdeps_CXX} ${prev}${p}" + fi + fi + ;; + + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test "$pre_test_object_deps_done" = no; then + if test -z "$predep_objects_CXX"; then + predep_objects_CXX="$p" + else + predep_objects_CXX="$predep_objects_CXX $p" + fi + else + if test -z "$postdep_objects_CXX"; then + postdep_objects_CXX="$p" + else + postdep_objects_CXX="$postdep_objects_CXX $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling CXX test program" +fi + +$rm -f confest.$objext + +case " $postdeps_CXX " in +*" -lc "*) archive_cmds_need_lc_CXX=no ;; +esac + +lt_prog_compiler_wl_CXX= +lt_prog_compiler_pic_CXX= +lt_prog_compiler_static_CXX= + +echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 + + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_CXX='-Bstatic' + fi + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | os2* | pw32*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_CXX='-DDLL_EXPORT' + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic_CXX='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + lt_prog_compiler_pic_CXX= + ;; + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic_CXX=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + ;; + *) + lt_prog_compiler_pic_CXX='-fPIC' + ;; + esac + ;; + *) + lt_prog_compiler_pic_CXX='-fPIC' + ;; + esac + else + case $host_os in + aix4* | aix5*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_CXX='-Bstatic' + else + lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68) + # Green Hills C++ Compiler + # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case "$cc_basename" in + xlc*) + lt_prog_compiler_pic_CXX='-qnocommon' + lt_prog_compiler_wl_CXX='-Wl,' + ;; + esac + ;; + dgux*) + case $cc_basename in + ec++) + lt_prog_compiler_pic_CXX='-KPIC' + ;; + ghcx) + # Green Hills C++ Compiler + lt_prog_compiler_pic_CXX='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | kfreebsd*-gnu) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + if test "$host_cpu" != ia64; then + lt_prog_compiler_pic_CXX='+Z' + fi + ;; + aCC) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_CXX='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux*) + case $cc_basename in + KCC) + # KAI C++ Compiler + lt_prog_compiler_wl_CXX='--backend -Wl,' + lt_prog_compiler_pic_CXX='-fPIC' + ;; + icpc) + # Intel C++ + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-static' + ;; + cxx) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + lt_prog_compiler_pic_CXX= + lt_prog_compiler_static_CXX='-non_shared' + ;; + *) + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx) + lt_prog_compiler_pic_CXX='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd*) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC) + lt_prog_compiler_wl_CXX='--backend -Wl,' + ;; + RCC) + # Rational C++ 2.4.1 + lt_prog_compiler_pic_CXX='-pic' + ;; + cxx) + # Digital/Compaq C++ + lt_prog_compiler_wl_CXX='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + lt_prog_compiler_pic_CXX= + lt_prog_compiler_static_CXX='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + sco*) + case $cc_basename in + CC) + lt_prog_compiler_pic_CXX='-fPIC' + ;; + *) + ;; + esac + ;; + solaris*) + case $cc_basename in + CC) + # Sun C++ 4.2, 5.x and Centerline C++ + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-Bstatic' + lt_prog_compiler_wl_CXX='-Qoption ld ' + ;; + gcx) + # Green Hills C++ Compiler + lt_prog_compiler_pic_CXX='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC) + # Sun C++ 4.x + lt_prog_compiler_pic_CXX='-pic' + lt_prog_compiler_static_CXX='-Bstatic' + ;; + lcc) + # Lucid + lt_prog_compiler_pic_CXX='-pic' + ;; + *) + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC) + # NonStop-UX NCC 3.20 + lt_prog_compiler_pic_CXX='-KPIC' + ;; + *) + ;; + esac + ;; + unixware*) + ;; + vxworks*) + ;; + *) + lt_prog_compiler_can_build_shared_CXX=no + ;; + esac + fi + +echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 +echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6 + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic_CXX"; then + +echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 +echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6 +if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_prog_compiler_pic_works_CXX=no + ac_outfile=conftest.$ac_objext + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:11176: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:11180: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s conftest.err; then + lt_prog_compiler_pic_works_CXX=yes + fi + fi + $rm conftest* + +fi +echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5 +echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6 + +if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then + case $lt_prog_compiler_pic_CXX in + "" | " "*) ;; + *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; + esac +else + lt_prog_compiler_pic_CXX= + lt_prog_compiler_can_build_shared_CXX=no +fi + +fi +case "$host_os" in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic_CXX= + ;; + *) + lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" + ;; +esac + +echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 +if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_prog_compiler_c_o_CXX=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:11236: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:11240: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s out/conftest.err; then + lt_cv_prog_compiler_c_o_CXX=yes + fi + fi + chmod u+w . + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* + +fi +echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6 + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + echo "$as_me:$LINENO: result: $hard_links" >&5 +echo "${ECHO_T}$hard_links" >&6 + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + +echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 + + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in + aix4* | aix5*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + export_symbols_cmds_CXX="$ltdll_cmds" + ;; + cygwin* | mingw*) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; + *) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac + +echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 +echo "${ECHO_T}$ld_shlibs_CXX" >&6 +test "$ld_shlibs_CXX" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc_CXX" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc_CXX=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds_CXX in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_CXX + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag_CXX + allow_undefined_flag_CXX= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc_CXX=no + else + archive_cmds_need_lc_CXX=yes + fi + allow_undefined_flag_CXX=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 +echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6 + ;; + esac + fi + ;; +esac + +echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix4* | aix5*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +kfreebsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.01* | freebsdelf3.01*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + *) # from 3.2 on + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case "$host_cpu" in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +echo "${ECHO_T}$dynamic_linker" >&6 +test "$dynamic_linker" = no && can_build_shared=no + +echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 +hardcode_action_CXX= +if test -n "$hardcode_libdir_flag_spec_CXX" || \ + test -n "$runpath_var_CXX" || \ + test "X$hardcode_automatic_CXX" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct_CXX" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no && + test "$hardcode_minus_L_CXX" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action_CXX=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action_CXX=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action_CXX=unsupported +fi +echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 +echo "${ECHO_T}$hardcode_action_CXX" >&6 + +if test "$hardcode_action_CXX" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + +striplib= +old_striplib= +echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + ;; + *) + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + ;; + esac +fi + +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dl_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dl_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + + *) + echo "$as_me:$LINENO: checking for shl_load" >&5 +echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 +if test "${ac_cv_func_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define shl_load to an innocuous variant, in case declares shl_load. + For example, HP-UX 11i declares gettimeofday. */ +#define shl_load innocuous_shl_load + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char shl_load (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef shl_load + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_shl_load) || defined (__stub___shl_load) +choke me +#else +char (*f) () = shl_load; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != shl_load; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_shl_load=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_shl_load=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +echo "${ECHO_T}$ac_cv_func_shl_load" >&6 +if test $ac_cv_func_shl_load = yes; then + lt_cv_dlopen="shl_load" +else + echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 +if test "${ac_cv_lib_dld_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load (); +int +main () +{ +shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dld_shl_load=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dld_shl_load=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +if test $ac_cv_lib_dld_shl_load = yes; then + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" +else + echo "$as_me:$LINENO: checking for dlopen" >&5 +echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 +if test "${ac_cv_func_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define dlopen to an innocuous variant, in case declares dlopen. + For example, HP-UX 11i declares gettimeofday. */ +#define dlopen innocuous_dlopen + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char dlopen (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef dlopen + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_dlopen) || defined (__stub___dlopen) +choke me +#else +char (*f) () = dlopen; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != dlopen; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +echo "${ECHO_T}$ac_cv_func_dlopen" >&6 +if test $ac_cv_func_dlopen = yes; then + lt_cv_dlopen="dlopen" +else + echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dl_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dl_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 +if test "${ac_cv_lib_svld_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_svld_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_svld_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 +if test $ac_cv_lib_svld_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 +if test "${ac_cv_lib_dld_dld_link+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dld_link (); +int +main () +{ +dld_link (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dld_dld_link=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dld_dld_link=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 +if test $ac_cv_lib_dld_dld_link = yes; then + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 +if test "${lt_cv_dlopen_self+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +} +EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_unknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +echo "${ECHO_T}$lt_cv_dlopen_self" >&6 + + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 +if test "${lt_cv_dlopen_self_static+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +} +EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + compiler_CXX \ + CC_CXX \ + LD_CXX \ + lt_prog_compiler_wl_CXX \ + lt_prog_compiler_pic_CXX \ + lt_prog_compiler_static_CXX \ + lt_prog_compiler_no_builtin_flag_CXX \ + export_dynamic_flag_spec_CXX \ + thread_safe_flag_spec_CXX \ + whole_archive_flag_spec_CXX \ + enable_shared_with_static_runtimes_CXX \ + old_archive_cmds_CXX \ + old_archive_from_new_cmds_CXX \ + predep_objects_CXX \ + postdep_objects_CXX \ + predeps_CXX \ + postdeps_CXX \ + compiler_lib_search_path_CXX \ + archive_cmds_CXX \ + archive_expsym_cmds_CXX \ + postinstall_cmds_CXX \ + postuninstall_cmds_CXX \ + old_archive_from_expsyms_cmds_CXX \ + allow_undefined_flag_CXX \ + no_undefined_flag_CXX \ + export_symbols_cmds_CXX \ + hardcode_libdir_flag_spec_CXX \ + hardcode_libdir_flag_spec_ld_CXX \ + hardcode_libdir_separator_CXX \ + hardcode_automatic_CXX \ + module_cmds_CXX \ + module_expsym_cmds_CXX \ + lt_cv_prog_compiler_c_o_CXX \ + exclude_expsyms_CXX \ + include_expsyms_CXX; do + + case $var in + old_archive_cmds_CXX | \ + old_archive_from_new_cmds_CXX | \ + archive_cmds_CXX | \ + archive_expsym_cmds_CXX | \ + module_cmds_CXX | \ + module_expsym_cmds_CXX | \ + old_archive_from_expsyms_cmds_CXX | \ + export_symbols_cmds_CXX | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac + +cfgfile="$ofile" + + cat <<__EOF__ >> "$cfgfile" +# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc_CXX + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# A language-specific compiler. +CC=$lt_compiler_CXX + +# Is the compiler the GNU C compiler? +with_gcc=$GCC_CXX + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_LD_CXX + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl_CXX + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_CXX +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX + +# Must we lock files when doing compilation ? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static_CXX + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds_CXX +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds_CXX +archive_expsym_cmds=$lt_archive_expsym_cmds_CXX +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds_CXX +module_expsym_cmds=$lt_module_expsym_cmds_CXX + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects_CXX + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects_CXX + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps_CXX + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps_CXX + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path_CXX + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag_CXX + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag_CXX + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action_CXX + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct_CXX + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L_CXX + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic_CXX + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs_CXX + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path_CXX" + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols_CXX + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds_CXX + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms_CXX + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms_CXX + +# ### END LIBTOOL TAG CONFIG: $tagname + +__EOF__ + + +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi + + +ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +CC=$lt_save_CC +LDCXX=$LD +LD=$lt_save_LD +GCC=$lt_save_GCC +with_gnu_ldcxx=$with_gnu_ld +with_gnu_ld=$lt_save_with_gnu_ld +lt_cv_path_LDCXX=$lt_cv_path_LD +lt_cv_path_LD=$lt_save_path_LD +lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld + + else + tagname="" + fi + ;; + + F77) + if test -n "$F77" && test "X$F77" != "Xno"; then + +ac_ext=f +ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' +ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_f77_compiler_gnu + + +archive_cmds_need_lc_F77=no +allow_undefined_flag_F77= +always_export_symbols_F77=no +archive_expsym_cmds_F77= +export_dynamic_flag_spec_F77= +hardcode_direct_F77=no +hardcode_libdir_flag_spec_F77= +hardcode_libdir_flag_spec_ld_F77= +hardcode_libdir_separator_F77= +hardcode_minus_L_F77=no +hardcode_automatic_F77=no +module_cmds_F77= +module_expsym_cmds_F77= +link_all_deplibs_F77=unknown +old_archive_cmds_F77=$old_archive_cmds +no_undefined_flag_F77= +whole_archive_flag_spec_F77= +enable_shared_with_static_runtimes_F77=no + +# Source file extension for f77 test sources. +ac_ext=f + +# Object file extension for compiled f77 test sources. +objext=o +objext_F77=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code=" subroutine t\n return\n end\n" + +# Code to be used in simple link tests +lt_simple_link_test_code=" program t\n end\n" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${F77-"f77"} +compiler=$CC +compiler_F77=$CC +cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` + +echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 +echo "$as_me:$LINENO: result: $can_build_shared" >&5 +echo "${ECHO_T}$can_build_shared" >&6 + +echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; +aix4* | aix5*) + test "$enable_shared" = yes && enable_static=no + ;; +esac +echo "$as_me:$LINENO: result: $enable_shared" >&5 +echo "${ECHO_T}$enable_shared" >&6 + +echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +echo "$as_me:$LINENO: result: $enable_static" >&5 +echo "${ECHO_T}$enable_static" >&6 + +test "$ld_shlibs_F77" = no && can_build_shared=no + +GCC_F77="$G77" +LD_F77="$LD" + +lt_prog_compiler_wl_F77= +lt_prog_compiler_pic_F77= +lt_prog_compiler_static_F77= + +echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 + + if test "$GCC" = yes; then + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_static_F77='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_F77='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_F77='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic_F77='-fno-common' + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared_F77=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic_F77=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_F77='-fPIC' + ;; + esac + ;; + + *) + lt_prog_compiler_pic_F77='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl_F77='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_F77='-Bstatic' + else + lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp' + fi + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case "$cc_basename" in + xlc*) + lt_prog_compiler_pic_F77='-qnocommon' + lt_prog_compiler_wl_F77='-Wl,' + ;; + esac + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_F77='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl_F77='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_F77='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static_F77='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl_F77='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static_F77='-non_shared' + ;; + + newsos6) + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + linux*) + case $CC in + icc* | ecc*) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-static' + ;; + ccc*) + lt_prog_compiler_wl_F77='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static_F77='-non_shared' + ;; + esac + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl_F77='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static_F77='-non_shared' + ;; + + sco3.2v5*) + lt_prog_compiler_pic_F77='-Kpic' + lt_prog_compiler_static_F77='-dn' + ;; + + solaris*) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + sunos4*) + lt_prog_compiler_wl_F77='-Qoption ld ' + lt_prog_compiler_pic_F77='-PIC' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic_F77='-Kconform_pic' + lt_prog_compiler_static_F77='-Bstatic' + fi + ;; + + uts4*) + lt_prog_compiler_pic_F77='-pic' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared_F77=no + ;; + esac + fi + +echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 +echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6 + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic_F77"; then + +echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 +echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6 +if test "${lt_prog_compiler_pic_works_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_prog_compiler_pic_works_F77=no + ac_outfile=conftest.$ac_objext + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic_F77" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:13532: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:13536: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s conftest.err; then + lt_prog_compiler_pic_works_F77=yes + fi + fi + $rm conftest* + +fi +echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5 +echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6 + +if test x"$lt_prog_compiler_pic_works_F77" = xyes; then + case $lt_prog_compiler_pic_F77 in + "" | " "*) ;; + *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;; + esac +else + lt_prog_compiler_pic_F77= + lt_prog_compiler_can_build_shared_F77=no +fi + +fi +case "$host_os" in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic_F77= + ;; + *) + lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77" + ;; +esac + +echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 +if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_prog_compiler_c_o_F77=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:13592: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:13596: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s out/conftest.err; then + lt_cv_prog_compiler_c_o_F77=yes + fi + fi + chmod u+w . + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* + +fi +echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6 + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + echo "$as_me:$LINENO: result: $hard_links" >&5 +echo "${ECHO_T}$hard_links" >&6 + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + +echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 + + runpath_var= + allow_undefined_flag_F77= + enable_shared_with_static_runtimes_F77=no + archive_cmds_F77= + archive_expsym_cmds_F77= + old_archive_From_new_cmds_F77= + old_archive_from_expsyms_cmds_F77= + export_dynamic_flag_spec_F77= + whole_archive_flag_spec_F77= + thread_safe_flag_spec_F77= + hardcode_libdir_flag_spec_F77= + hardcode_libdir_flag_spec_ld_F77= + hardcode_libdir_separator_F77= + hardcode_direct_F77=no + hardcode_minus_L_F77=no + hardcode_shlibpath_var_F77=unsupported + link_all_deplibs_F77=unknown + hardcode_automatic_F77=no + module_cmds_F77= + module_expsym_cmds_F77= + always_export_symbols_F77=no + export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms_F77= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + ld_shlibs_F77=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs_F77=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + fi + ;; + + amigaos*) + archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_minus_L_F77=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + ld_shlibs_F77=no + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag_F77=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs_F77=no + fi + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec_F77='-L$libdir' + allow_undefined_flag_F77=unsupported + always_export_symbols_F77=no + enable_shared_with_static_runtimes_F77=yes + export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris* | sysv5*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs_F77=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs_F77=no + fi + ;; + + sunos4*) + archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds_F77="$tmp_archive_cmds" + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + if test $supports_anon_versioning = yes; then + archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ +cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +$echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + else + archive_expsym_cmds_F77="$tmp_archive_cmds" + fi + else + ld_shlibs_F77=no + fi + ;; + + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs_F77=no + fi + ;; + esac + + if test "$ld_shlibs_F77" = yes; then + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_F77='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec_F77= + fi + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag_F77=unsupported + always_export_symbols_F77=yes + archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L_F77=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct_F77=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds_F77='' + hardcode_direct_F77=yes + hardcode_libdir_separator_F77=':' + link_all_deplibs_F77=yes + + if test "$GCC" = yes; then + case $host_os in aix4.012|aix4.012.*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct_F77=yes + else + # We have old collect2 + hardcode_direct_F77=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L_F77=yes + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_libdir_separator_F77= + fi + esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols_F77=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag_F77='-berok' + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF + program main + + end +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_f77_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag_F77="-z nodefs" + archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF + program main + + end +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_f77_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag_F77=' ${wl}-bernotok' + allow_undefined_flag_F77=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + always_export_symbols_F77=yes + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec_F77=' ' + archive_cmds_need_lc_F77=yes + # This is similar to how AIX traditionally builds it's shared libraries. + archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_minus_L_F77=yes + # see comment about different semantics on the GNU ld section + ld_shlibs_F77=no + ;; + + bsdi[45]*) + export_dynamic_flag_spec_F77=-rdynamic + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec_F77=' ' + allow_undefined_flag_F77=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_From_new_cmds_F77='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes_F77=yes + ;; + + darwin* | rhapsody*) + case "$host_os" in + rhapsody* | darwin1.[012]) + allow_undefined_flag_F77='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + archive_cmds_need_lc_F77=no + hardcode_direct_F77=no + hardcode_automatic_F77=yes + hardcode_shlibpath_var_F77=unsupported + whole_archive_flag_spec_F77='' + link_all_deplibs_F77=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case "$cc_basename" in + xlc*) + output_verbose_link_cmd='echo' + archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + ld_shlibs_F77=no + ;; + esac + fi + ;; + + dgux*) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_shlibpath_var_F77=no + ;; + + freebsd1*) + ld_shlibs_F77=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec_F77='-R$libdir' + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_F77=yes + hardcode_minus_L_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | kfreebsd*-gnu) + archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_F77='-R$libdir' + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + hpux9*) + if test "$GCC" = yes; then + archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_F77=: + hardcode_direct_F77=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_F77=yes + export_dynamic_flag_spec_F77='${wl}-E' + ;; + + hpux10* | hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*|ia64*) + archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case "$host_cpu" in + hppa*64*|ia64*) + archive_cmds_F77='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' + ;; + *) + archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*) + hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec_ld_F77='+b $libdir' + hardcode_libdir_separator_F77=: + hardcode_direct_F77=no + hardcode_shlibpath_var_F77=no + ;; + ia64*) + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_direct_F77=no + hardcode_shlibpath_var_F77=no + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_F77=yes + ;; + *) + hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_F77=: + hardcode_direct_F77=yes + export_dynamic_flag_spec_F77='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_F77=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_ld_F77='-rpath $libdir' + fi + hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_F77=: + link_all_deplibs_F77=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec_F77='-R$libdir' + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + newsos6) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_F77=yes + hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_F77=: + hardcode_shlibpath_var_F77=no + ;; + + openbsd*) + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' + export_dynamic_flag_spec_F77='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_F77='-R$libdir' + ;; + *) + archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_minus_L_F77=yes + allow_undefined_flag_F77=unsupported + archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag_F77=' -expect_unresolved \*' + archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_F77=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag_F77=' -expect_unresolved \*' + archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec_F77='-rpath $libdir' + fi + hardcode_libdir_separator_F77=: + ;; + + sco3.2v5*) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_F77=no + export_dynamic_flag_spec_F77='${wl}-Bexport' + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ;; + + solaris*) + no_undefined_flag_F77=' -z text' + if test "$GCC" = yes; then + archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else + archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + hardcode_libdir_flag_spec_F77='-R$libdir' + hardcode_shlibpath_var_F77=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;; + esac + link_all_deplibs_F77=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_direct_F77=yes + hardcode_minus_L_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_F77=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds_F77='$CC -r -o $output$reload_objs' + hardcode_direct_F77=no + ;; + motorola) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var_F77=no + ;; + + sysv4.3*) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_F77=no + export_dynamic_flag_spec_F77='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_F77=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs_F77=yes + fi + ;; + + sysv4.2uw2*) + archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_F77=yes + hardcode_minus_L_F77=no + hardcode_shlibpath_var_F77=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; + + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) + no_undefined_flag_F77='${wl}-z ${wl}text' + if test "$GCC" = yes; then + archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_F77='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var_F77=no + ;; + + sysv5*) + no_undefined_flag_F77=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + hardcode_libdir_flag_spec_F77= + hardcode_shlibpath_var_F77=no + runpath_var='LD_RUN_PATH' + ;; + + uts4*) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_shlibpath_var_F77=no + ;; + + *) + ld_shlibs_F77=no + ;; + esac + fi + +echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 +echo "${ECHO_T}$ld_shlibs_F77" >&6 +test "$ld_shlibs_F77" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc_F77" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc_F77=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds_F77 in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_F77 + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag_F77 + allow_undefined_flag_F77= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc_F77=no + else + archive_cmds_need_lc_F77=yes + fi + allow_undefined_flag_F77=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 +echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6 + ;; + esac + fi + ;; +esac + +echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix4* | aix5*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +kfreebsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.01* | freebsdelf3.01*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + *) # from 3.2 on + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case "$host_cpu" in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +echo "${ECHO_T}$dynamic_linker" >&6 +test "$dynamic_linker" = no && can_build_shared=no + +echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 +hardcode_action_F77= +if test -n "$hardcode_libdir_flag_spec_F77" || \ + test -n "$runpath_var_F77" || \ + test "X$hardcode_automatic_F77" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct_F77" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no && + test "$hardcode_minus_L_F77" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action_F77=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action_F77=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action_F77=unsupported +fi +echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 +echo "${ECHO_T}$hardcode_action_F77" >&6 + +if test "$hardcode_action_F77" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + +striplib= +old_striplib= +echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + ;; + *) + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + ;; + esac +fi + + + +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + compiler_F77 \ + CC_F77 \ + LD_F77 \ + lt_prog_compiler_wl_F77 \ + lt_prog_compiler_pic_F77 \ + lt_prog_compiler_static_F77 \ + lt_prog_compiler_no_builtin_flag_F77 \ + export_dynamic_flag_spec_F77 \ + thread_safe_flag_spec_F77 \ + whole_archive_flag_spec_F77 \ + enable_shared_with_static_runtimes_F77 \ + old_archive_cmds_F77 \ + old_archive_from_new_cmds_F77 \ + predep_objects_F77 \ + postdep_objects_F77 \ + predeps_F77 \ + postdeps_F77 \ + compiler_lib_search_path_F77 \ + archive_cmds_F77 \ + archive_expsym_cmds_F77 \ + postinstall_cmds_F77 \ + postuninstall_cmds_F77 \ + old_archive_from_expsyms_cmds_F77 \ + allow_undefined_flag_F77 \ + no_undefined_flag_F77 \ + export_symbols_cmds_F77 \ + hardcode_libdir_flag_spec_F77 \ + hardcode_libdir_flag_spec_ld_F77 \ + hardcode_libdir_separator_F77 \ + hardcode_automatic_F77 \ + module_cmds_F77 \ + module_expsym_cmds_F77 \ + lt_cv_prog_compiler_c_o_F77 \ + exclude_expsyms_F77 \ + include_expsyms_F77; do + + case $var in + old_archive_cmds_F77 | \ + old_archive_from_new_cmds_F77 | \ + archive_cmds_F77 | \ + archive_expsym_cmds_F77 | \ + module_cmds_F77 | \ + module_expsym_cmds_F77 | \ + old_archive_from_expsyms_cmds_F77 | \ + export_symbols_cmds_F77 | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac + +cfgfile="$ofile" + + cat <<__EOF__ >> "$cfgfile" +# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc_F77 + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77 + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# A language-specific compiler. +CC=$lt_compiler_F77 + +# Is the compiler the GNU C compiler? +with_gcc=$GCC_F77 + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_LD_F77 + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl_F77 + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_F77 +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77 + +# Must we lock files when doing compilation ? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static_F77 + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77 + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77 + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77 + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77 + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds_F77 +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77 + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77 + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds_F77 +archive_expsym_cmds=$lt_archive_expsym_cmds_F77 +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds_F77 +module_expsym_cmds=$lt_module_expsym_cmds_F77 + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects_F77 + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects_F77 + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps_F77 + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps_F77 + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path_F77 + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag_F77 + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag_F77 + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action_F77 + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct_F77 + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L_F77 + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var_F77 + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic_F77 + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs_F77 + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path_F77" + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols_F77 + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds_F77 + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms_F77 + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms_F77 + +# ### END LIBTOOL TAG CONFIG: $tagname + +__EOF__ + + +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi + + +ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +CC="$lt_save_CC" + + else + tagname="" + fi + ;; + + GCJ) + if test -n "$GCJ" && test "X$GCJ" != "Xno"; then + + + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +objext_GCJ=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String argv) {}; }\n' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${GCJ-"gcj"} +compiler=$CC +compiler_GCJ=$CC + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +archive_cmds_need_lc_GCJ=no + + +lt_prog_compiler_no_builtin_flag_GCJ= + +if test "$GCC" = yes; then + lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' + + +echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 +if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:15627: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:15631: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s conftest.err; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $rm conftest* + +fi +echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 + +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" +else + : +fi + +fi + +lt_prog_compiler_wl_GCJ= +lt_prog_compiler_pic_GCJ= +lt_prog_compiler_static_GCJ= + +echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 + + if test "$GCC" = yes; then + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_static_GCJ='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_GCJ='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic_GCJ='-fno-common' + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared_GCJ=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic_GCJ=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_GCJ='-fPIC' + ;; + esac + ;; + + *) + lt_prog_compiler_pic_GCJ='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl_GCJ='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_GCJ='-Bstatic' + else + lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp' + fi + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case "$cc_basename" in + xlc*) + lt_prog_compiler_pic_GCJ='-qnocommon' + lt_prog_compiler_wl_GCJ='-Wl,' + ;; + esac + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl_GCJ='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_GCJ='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl_GCJ='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static_GCJ='-non_shared' + ;; + + newsos6) + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + linux*) + case $CC in + icc* | ecc*) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-static' + ;; + ccc*) + lt_prog_compiler_wl_GCJ='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static_GCJ='-non_shared' + ;; + esac + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl_GCJ='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static_GCJ='-non_shared' + ;; + + sco3.2v5*) + lt_prog_compiler_pic_GCJ='-Kpic' + lt_prog_compiler_static_GCJ='-dn' + ;; + + solaris*) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + sunos4*) + lt_prog_compiler_wl_GCJ='-Qoption ld ' + lt_prog_compiler_pic_GCJ='-PIC' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic_GCJ='-Kconform_pic' + lt_prog_compiler_static_GCJ='-Bstatic' + fi + ;; + + uts4*) + lt_prog_compiler_pic_GCJ='-pic' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared_GCJ=no + ;; + esac + fi + +echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 +echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6 + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic_GCJ"; then + +echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 +echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6 +if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_prog_compiler_pic_works_GCJ=no + ac_outfile=conftest.$ac_objext + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic_GCJ" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:15870: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:15874: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s conftest.err; then + lt_prog_compiler_pic_works_GCJ=yes + fi + fi + $rm conftest* + +fi +echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5 +echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6 + +if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then + case $lt_prog_compiler_pic_GCJ in + "" | " "*) ;; + *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;; + esac +else + lt_prog_compiler_pic_GCJ= + lt_prog_compiler_can_build_shared_GCJ=no +fi + +fi +case "$host_os" in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic_GCJ= + ;; + *) + lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ" + ;; +esac + +echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 +if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_prog_compiler_c_o_GCJ=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:15930: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:15934: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s out/conftest.err; then + lt_cv_prog_compiler_c_o_GCJ=yes + fi + fi + chmod u+w . + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* + +fi +echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6 + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + echo "$as_me:$LINENO: result: $hard_links" >&5 +echo "${ECHO_T}$hard_links" >&6 + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + +echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 + + runpath_var= + allow_undefined_flag_GCJ= + enable_shared_with_static_runtimes_GCJ=no + archive_cmds_GCJ= + archive_expsym_cmds_GCJ= + old_archive_From_new_cmds_GCJ= + old_archive_from_expsyms_cmds_GCJ= + export_dynamic_flag_spec_GCJ= + whole_archive_flag_spec_GCJ= + thread_safe_flag_spec_GCJ= + hardcode_libdir_flag_spec_GCJ= + hardcode_libdir_flag_spec_ld_GCJ= + hardcode_libdir_separator_GCJ= + hardcode_direct_GCJ=no + hardcode_minus_L_GCJ=no + hardcode_shlibpath_var_GCJ=unsupported + link_all_deplibs_GCJ=unknown + hardcode_automatic_GCJ=no + module_cmds_GCJ= + module_expsym_cmds_GCJ= + always_export_symbols_GCJ=no + export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms_GCJ= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + ld_shlibs_GCJ=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs_GCJ=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + fi + ;; + + amigaos*) + archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_minus_L_GCJ=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + ld_shlibs_GCJ=no + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag_GCJ=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs_GCJ=no + fi + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec_GCJ='-L$libdir' + allow_undefined_flag_GCJ=unsupported + always_export_symbols_GCJ=no + enable_shared_with_static_runtimes_GCJ=yes + export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris* | sysv5*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs_GCJ=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs_GCJ=no + fi + ;; + + sunos4*) + archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; + + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds_GCJ="$tmp_archive_cmds" + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + if test $supports_anon_versioning = yes; then + archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ +cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +$echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + else + archive_expsym_cmds_GCJ="$tmp_archive_cmds" + fi + else + ld_shlibs_GCJ=no + fi + ;; + + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs_GCJ=no + fi + ;; + esac + + if test "$ld_shlibs_GCJ" = yes; then + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec_GCJ= + fi + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag_GCJ=unsupported + always_export_symbols_GCJ=yes + archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L_GCJ=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct_GCJ=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds_GCJ='' + hardcode_direct_GCJ=yes + hardcode_libdir_separator_GCJ=':' + link_all_deplibs_GCJ=yes + + if test "$GCC" = yes; then + case $host_os in aix4.012|aix4.012.*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct_GCJ=yes + else + # We have old collect2 + hardcode_direct_GCJ=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L_GCJ=yes + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_libdir_separator_GCJ= + fi + esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols_GCJ=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag_GCJ='-berok' + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag_GCJ="-z nodefs" + archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag_GCJ=' ${wl}-bernotok' + allow_undefined_flag_GCJ=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + always_export_symbols_GCJ=yes + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec_GCJ=' ' + archive_cmds_need_lc_GCJ=yes + # This is similar to how AIX traditionally builds it's shared libraries. + archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_minus_L_GCJ=yes + # see comment about different semantics on the GNU ld section + ld_shlibs_GCJ=no + ;; + + bsdi[45]*) + export_dynamic_flag_spec_GCJ=-rdynamic + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec_GCJ=' ' + allow_undefined_flag_GCJ=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_From_new_cmds_GCJ='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes_GCJ=yes + ;; + + darwin* | rhapsody*) + case "$host_os" in + rhapsody* | darwin1.[012]) + allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + archive_cmds_need_lc_GCJ=no + hardcode_direct_GCJ=no + hardcode_automatic_GCJ=yes + hardcode_shlibpath_var_GCJ=unsupported + whole_archive_flag_spec_GCJ='' + link_all_deplibs_GCJ=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case "$cc_basename" in + xlc*) + output_verbose_link_cmd='echo' + archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + ld_shlibs_GCJ=no + ;; + esac + fi + ;; + + dgux*) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_shlibpath_var_GCJ=no + ;; + + freebsd1*) + ld_shlibs_GCJ=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec_GCJ='-R$libdir' + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_GCJ=yes + hardcode_minus_L_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | kfreebsd*-gnu) + archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_GCJ='-R$libdir' + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; + + hpux9*) + if test "$GCC" = yes; then + archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + hardcode_direct_GCJ=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_GCJ=yes + export_dynamic_flag_spec_GCJ='${wl}-E' + ;; + + hpux10* | hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*|ia64*) + archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case "$host_cpu" in + hppa*64*|ia64*) + archive_cmds_GCJ='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' + ;; + *) + archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*) + hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec_ld_GCJ='+b $libdir' + hardcode_libdir_separator_GCJ=: + hardcode_direct_GCJ=no + hardcode_shlibpath_var_GCJ=no + ;; + ia64*) + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_direct_GCJ=no + hardcode_shlibpath_var_GCJ=no + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_GCJ=yes + ;; + *) + hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + hardcode_direct_GCJ=yes + export_dynamic_flag_spec_GCJ='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_GCJ=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir' + fi + hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + link_all_deplibs_GCJ=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec_GCJ='-R$libdir' + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; + + newsos6) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_GCJ=yes + hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + hardcode_shlibpath_var_GCJ=no + ;; + + openbsd*) + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' + export_dynamic_flag_spec_GCJ='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_GCJ='-R$libdir' + ;; + *) + archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_minus_L_GCJ=yes + allow_undefined_flag_GCJ=unsupported + archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag_GCJ=' -expect_unresolved \*' + archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag_GCJ=' -expect_unresolved \*' + archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec_GCJ='-rpath $libdir' + fi + hardcode_libdir_separator_GCJ=: + ;; + + sco3.2v5*) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_GCJ=no + export_dynamic_flag_spec_GCJ='${wl}-Bexport' + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ;; + + solaris*) + no_undefined_flag_GCJ=' -z text' + if test "$GCC" = yes; then + archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else + archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + hardcode_libdir_flag_spec_GCJ='-R$libdir' + hardcode_shlibpath_var_GCJ=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;; + esac + link_all_deplibs_GCJ=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_direct_GCJ=yes + hardcode_minus_L_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_GCJ=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds_GCJ='$CC -r -o $output$reload_objs' + hardcode_direct_GCJ=no + ;; + motorola) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var_GCJ=no + ;; + + sysv4.3*) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_GCJ=no + export_dynamic_flag_spec_GCJ='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_GCJ=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs_GCJ=yes + fi + ;; + + sysv4.2uw2*) + archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_GCJ=yes + hardcode_minus_L_GCJ=no + hardcode_shlibpath_var_GCJ=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; + + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) + no_undefined_flag_GCJ='${wl}-z ${wl}text' + if test "$GCC" = yes; then + archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_GCJ='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var_GCJ=no + ;; + + sysv5*) + no_undefined_flag_GCJ=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + hardcode_libdir_flag_spec_GCJ= + hardcode_shlibpath_var_GCJ=no + runpath_var='LD_RUN_PATH' + ;; + + uts4*) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_shlibpath_var_GCJ=no + ;; + + *) + ld_shlibs_GCJ=no + ;; + esac + fi + +echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 +echo "${ECHO_T}$ld_shlibs_GCJ" >&6 +test "$ld_shlibs_GCJ" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc_GCJ" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc_GCJ=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds_GCJ in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_GCJ + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ + allow_undefined_flag_GCJ= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc_GCJ=no + else + archive_cmds_need_lc_GCJ=yes + fi + allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 +echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6 + ;; + esac + fi + ;; +esac + +echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix4* | aix5*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +kfreebsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.01* | freebsdelf3.01*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + *) # from 3.2 on + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case "$host_cpu" in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +echo "${ECHO_T}$dynamic_linker" >&6 +test "$dynamic_linker" = no && can_build_shared=no + +echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 +hardcode_action_GCJ= +if test -n "$hardcode_libdir_flag_spec_GCJ" || \ + test -n "$runpath_var_GCJ" || \ + test "X$hardcode_automatic_GCJ" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct_GCJ" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && + test "$hardcode_minus_L_GCJ" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action_GCJ=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action_GCJ=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action_GCJ=unsupported +fi +echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 +echo "${ECHO_T}$hardcode_action_GCJ" >&6 + +if test "$hardcode_action_GCJ" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + +striplib= +old_striplib= +echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + ;; + *) + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + ;; + esac +fi + +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dl_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dl_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + + *) + echo "$as_me:$LINENO: checking for shl_load" >&5 +echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 +if test "${ac_cv_func_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define shl_load to an innocuous variant, in case declares shl_load. + For example, HP-UX 11i declares gettimeofday. */ +#define shl_load innocuous_shl_load + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char shl_load (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef shl_load + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_shl_load) || defined (__stub___shl_load) +choke me +#else +char (*f) () = shl_load; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != shl_load; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_shl_load=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_shl_load=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +echo "${ECHO_T}$ac_cv_func_shl_load" >&6 +if test $ac_cv_func_shl_load = yes; then + lt_cv_dlopen="shl_load" +else + echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 +if test "${ac_cv_lib_dld_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load (); +int +main () +{ +shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dld_shl_load=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dld_shl_load=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +if test $ac_cv_lib_dld_shl_load = yes; then + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" +else + echo "$as_me:$LINENO: checking for dlopen" >&5 +echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 +if test "${ac_cv_func_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define dlopen to an innocuous variant, in case declares dlopen. + For example, HP-UX 11i declares gettimeofday. */ +#define dlopen innocuous_dlopen + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char dlopen (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef dlopen + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_dlopen) || defined (__stub___dlopen) +choke me +#else +char (*f) () = dlopen; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != dlopen; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +echo "${ECHO_T}$ac_cv_func_dlopen" >&6 +if test $ac_cv_func_dlopen = yes; then + lt_cv_dlopen="dlopen" +else + echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dl_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dl_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 +if test "${ac_cv_lib_svld_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_svld_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_svld_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 +if test $ac_cv_lib_svld_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 +if test "${ac_cv_lib_dld_dld_link+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dld_link (); +int +main () +{ +dld_link (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dld_dld_link=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dld_dld_link=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 +if test $ac_cv_lib_dld_dld_link = yes; then + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 +if test "${lt_cv_dlopen_self+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +} +EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_unknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +echo "${ECHO_T}$lt_cv_dlopen_self" >&6 + + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 +if test "${lt_cv_dlopen_self_static+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +} +EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + compiler_GCJ \ + CC_GCJ \ + LD_GCJ \ + lt_prog_compiler_wl_GCJ \ + lt_prog_compiler_pic_GCJ \ + lt_prog_compiler_static_GCJ \ + lt_prog_compiler_no_builtin_flag_GCJ \ + export_dynamic_flag_spec_GCJ \ + thread_safe_flag_spec_GCJ \ + whole_archive_flag_spec_GCJ \ + enable_shared_with_static_runtimes_GCJ \ + old_archive_cmds_GCJ \ + old_archive_from_new_cmds_GCJ \ + predep_objects_GCJ \ + postdep_objects_GCJ \ + predeps_GCJ \ + postdeps_GCJ \ + compiler_lib_search_path_GCJ \ + archive_cmds_GCJ \ + archive_expsym_cmds_GCJ \ + postinstall_cmds_GCJ \ + postuninstall_cmds_GCJ \ + old_archive_from_expsyms_cmds_GCJ \ + allow_undefined_flag_GCJ \ + no_undefined_flag_GCJ \ + export_symbols_cmds_GCJ \ + hardcode_libdir_flag_spec_GCJ \ + hardcode_libdir_flag_spec_ld_GCJ \ + hardcode_libdir_separator_GCJ \ + hardcode_automatic_GCJ \ + module_cmds_GCJ \ + module_expsym_cmds_GCJ \ + lt_cv_prog_compiler_c_o_GCJ \ + exclude_expsyms_GCJ \ + include_expsyms_GCJ; do + + case $var in + old_archive_cmds_GCJ | \ + old_archive_from_new_cmds_GCJ | \ + archive_cmds_GCJ | \ + archive_expsym_cmds_GCJ | \ + module_cmds_GCJ | \ + module_expsym_cmds_GCJ | \ + old_archive_from_expsyms_cmds_GCJ | \ + export_symbols_cmds_GCJ | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac + +cfgfile="$ofile" + + cat <<__EOF__ >> "$cfgfile" +# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc_GCJ + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# A language-specific compiler. +CC=$lt_compiler_GCJ + +# Is the compiler the GNU C compiler? +with_gcc=$GCC_GCJ + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_LD_GCJ + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl_GCJ + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_GCJ +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ + +# Must we lock files when doing compilation ? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static_GCJ + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds_GCJ +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds_GCJ +archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds_GCJ +module_expsym_cmds=$lt_module_expsym_cmds_GCJ + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects_GCJ + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects_GCJ + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps_GCJ + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps_GCJ + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag_GCJ + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag_GCJ + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action_GCJ + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct_GCJ + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L_GCJ + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic_GCJ + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs_GCJ + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path_GCJ" + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols_GCJ + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds_GCJ + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms_GCJ + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms_GCJ + +# ### END LIBTOOL TAG CONFIG: $tagname + +__EOF__ + + +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi + + +ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +CC="$lt_save_CC" + + else + tagname="" + fi + ;; -if test -n "$DOT"; then - echo "$as_me:$LINENO: result: $DOT" >&5 -echo "${ECHO_T}$DOT" >&6 + RC) + + + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +objext_RC=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n' + +# Code to be used in simple link tests +lt_simple_link_test_code="$lt_simple_compile_test_code" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${RC-"windres"} +compiler=$CC +compiler_RC=$CC +lt_cv_prog_compiler_c_o_RC=yes + +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + compiler_RC \ + CC_RC \ + LD_RC \ + lt_prog_compiler_wl_RC \ + lt_prog_compiler_pic_RC \ + lt_prog_compiler_static_RC \ + lt_prog_compiler_no_builtin_flag_RC \ + export_dynamic_flag_spec_RC \ + thread_safe_flag_spec_RC \ + whole_archive_flag_spec_RC \ + enable_shared_with_static_runtimes_RC \ + old_archive_cmds_RC \ + old_archive_from_new_cmds_RC \ + predep_objects_RC \ + postdep_objects_RC \ + predeps_RC \ + postdeps_RC \ + compiler_lib_search_path_RC \ + archive_cmds_RC \ + archive_expsym_cmds_RC \ + postinstall_cmds_RC \ + postuninstall_cmds_RC \ + old_archive_from_expsyms_cmds_RC \ + allow_undefined_flag_RC \ + no_undefined_flag_RC \ + export_symbols_cmds_RC \ + hardcode_libdir_flag_spec_RC \ + hardcode_libdir_flag_spec_ld_RC \ + hardcode_libdir_separator_RC \ + hardcode_automatic_RC \ + module_cmds_RC \ + module_expsym_cmds_RC \ + lt_cv_prog_compiler_c_o_RC \ + exclude_expsyms_RC \ + include_expsyms_RC; do + + case $var in + old_archive_cmds_RC | \ + old_archive_from_new_cmds_RC | \ + archive_cmds_RC | \ + archive_expsym_cmds_RC | \ + module_cmds_RC | \ + module_expsym_cmds_RC | \ + old_archive_from_expsyms_cmds_RC | \ + export_symbols_cmds_RC | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac + +cfgfile="$ofile" + + cat <<__EOF__ >> "$cfgfile" +# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc_RC + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# A language-specific compiler. +CC=$lt_compiler_RC + +# Is the compiler the GNU C compiler? +with_gcc=$GCC_RC + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_LD_RC + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl_RC + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_RC +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC + +# Must we lock files when doing compilation ? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static_RC + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds_RC +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds_RC +archive_expsym_cmds=$lt_archive_expsym_cmds_RC +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds_RC +module_expsym_cmds=$lt_module_expsym_cmds_RC + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects_RC + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects_RC + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps_RC + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps_RC + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path_RC + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag_RC + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag_RC + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action_RC + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct_RC + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L_RC + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var_RC + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic_RC + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs_RC + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path_RC" + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols_RC + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds_RC + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms_RC + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms_RC + +# ### END LIBTOOL TAG CONFIG: $tagname + +__EOF__ + + +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi + + +ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +CC="$lt_save_CC" + + ;; + + *) + { { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5 +echo "$as_me: error: Unsupported tag name: $tagname" >&2;} + { (exit 1); exit 1; }; } + ;; + esac + + # Append the new tag name to the list of available tags. + if test -n "$tagname" ; then + available_tags="$available_tags $tagname" + fi + fi + done + IFS="$lt_save_ifs" + + # Now substitute the updated list of available tags. + if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then + mv "${ofile}T" "$ofile" + chmod +x "$ofile" + else + rm -f "${ofile}T" + { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5 +echo "$as_me: error: unable to update list of available tagged configurations." >&2;} + { (exit 1); exit 1; }; } + fi +fi + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + +# Prevent multiple expansion + + + + + + + + + + + + + + + + + + + + + +# check for dlopen,dlsym... or shl_load, shl_findsym... +LIBADD_DL= + + +echo "$as_me:$LINENO: checking for shl_load" >&5 +echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 +if test "${ac_cv_func_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define shl_load to an innocuous variant, in case declares shl_load. + For example, HP-UX 11i declares gettimeofday. */ +#define shl_load innocuous_shl_load + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char shl_load (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef shl_load + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_shl_load) || defined (__stub___shl_load) +choke me +#else +char (*f) () = shl_load; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != shl_load; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_shl_load=yes else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 - fi +ac_cv_func_shl_load=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext fi +echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +echo "${ECHO_T}$ac_cv_func_shl_load" >&6 +if test $ac_cv_func_shl_load = yes; then +cat >>confdefs.h <<\_ACEOF +#define HAVE_SHL_LOAD 1 +_ACEOF -if test x$enable_doc = xyes; then - DOC_TRUE= - DOC_FALSE='#' else - DOC_TRUE='#' - DOC_FALSE= + echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 +if test "${ac_cv_lib_dld_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load (); +int +main () +{ +shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dld_shl_load=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dld_shl_load=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +if test $ac_cv_lib_dld_shl_load = yes; then +cat >>confdefs.h <<\_ACEOF +#define HAVE_SHL_LOAD 1 +_ACEOF -if test x$DOT = x; then - if test "x$enable_dot" = xyes; then - { { echo "$as_me:$LINENO: error: could not find dot" >&5 -echo "$as_me: error: could not find dot" >&2;} - { (exit 1); exit 1; }; } - fi - enable_dot=no + LIBADD_DL="$LIBADD_DL -ldld" else - enable_dot=yes -fi + echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dl_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +ac_cv_lib_dl_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +if test $ac_cv_lib_dl_dlopen = yes; then +cat >>confdefs.h <<\_ACEOF +#define HAVE_LIBDL 1 +_ACEOF + LIBADD_DL="-ldl" +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#if HAVE_DLFCN_H +# include +#endif +int +main () +{ +dlopen(0, 0); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then -# Check for headers -# Note that the fourth argument to AC_CHECK_HEADERS is non-empty to force -# the configure probe to try compiling "#include
". See autoconf docs. -# ---------------------------------------------------------------------------- +cat >>confdefs.h <<\_ACEOF +#define HAVE_LIBDL 1 +_ACEOF +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -for ac_header in cmath -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 +if test "${ac_cv_lib_svld_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat >conftest.$ac_ext <<_ACEOF + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/**/ -#include <$ac_header> +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -4747,79 +19564,65 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - eval "$as_ac_Header=yes" + ac_cv_lib_svld_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -eval "$as_ac_Header=no" -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_lib_svld_dlopen=no fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi +echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 +if test $ac_cv_lib_svld_dlopen = yes; then -done - - -# Check for compiler characteristics -# ---------------------------------------------------------------------------- +cat >>confdefs.h <<\_ACEOF +#define HAVE_LIBDL 1 +_ACEOF -echo "$as_me:$LINENO: checking whether the compiler supports Run-Time Type Identification" >&5 -echo $ECHO_N "checking whether the compiler supports Run-Time Type Identification... $ECHO_C" >&6 -if test "${ac_cv_cxx_rtti+set}" = set; then + LIBADD_DL="-lsvld" +else + echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 +if test "${ac_cv_lib_dld_dld_link+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - cat >conftest.$ac_ext <<_ACEOF + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include -class Base { public : - Base () {} - virtual int f () { return 0; } - }; -class Derived : public Base { public : - Derived () {} - virtual int f () { return 1; } - }; +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dld_link (); int main () { -Derived d; -Base *ptr = &d; -return typeid (*ptr) == typeid (Derived); - +dld_link (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -4833,85 +19636,118 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_cxx_rtti=yes + ac_cv_lib_dld_dld_link=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_cxx_rtti=no +ac_cv_lib_dld_dld_link=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_cxx_rtti" >&5 -echo "${ECHO_T}$ac_cv_cxx_rtti" >&6 -if test "$ac_cv_cxx_rtti" = yes; then +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 +if test $ac_cv_lib_dld_dld_link = yes; then cat >>confdefs.h <<\_ACEOF -#define HAVE_RTTI 1 +#define HAVE_DLD 1 _ACEOF + LIBADD_DL="$LIBADD_DL -ldld" + fi -echo "$as_me:$LINENO: checking whether the compiler supports GCC C++ ABI name demangling" >&5 -echo $ECHO_N "checking whether the compiler supports GCC C++ ABI name demangling... $ECHO_C" >&6 -if test "${ac_cv_cxx_gcc_abi_demangle+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else +fi - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - cat >conftest.$ac_ext <<_ACEOF +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + +fi + + +fi + + +fi + + +if test "x$ac_cv_func_dlopen" = xyes || test "x$ac_cv_lib_dl_dlopen" = xyes; then + LIBS_SAVE="$LIBS" + LIBS="$LIBS $LIBADD_DL" + +for ac_func in dlerror +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include -#include -#include - -template -class A {}; +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func -int -main () -{ -A instance; -int status = 0; -char* c_name = 0; +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ -c_name = abi::__cxa_demangle(typeid(instance).name(), 0, 0, &status); +#ifdef __STDC__ +# include +#else +# include +#endif -std::string name(c_name); -free(c_name); +#undef $ac_func -return name == "A"; +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} +#endif +int +main () +{ +return f != $ac_func; ; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -4925,146 +19761,204 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_cxx_gcc_abi_demangle=yes + eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_cxx_gcc_abi_demangle=no +eval "$as_ac_var=no" +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + LIBS="$LIBS_SAVE" +fi + + +# check for doxygen + +# Check whether --enable-doxygen or --disable-doxygen was given. +if test "${enable_doxygen+set}" = set; then + enableval="$enable_doxygen" + +fi; +# Check whether --enable-dot or --disable-dot was given. +if test "${enable_dot+set}" = set; then + enableval="$enable_dot" + +fi; +# Check whether --enable-html-docs or --disable-html-docs was given. +if test "${enable_html_docs+set}" = set; then + enableval="$enable_html_docs" + +else + enable_html_docs=yes +fi; +# Check whether --enable-latex-docs or --disable-latex-docs was given. +if test "${enable_latex_docs+set}" = set; then + enableval="$enable_latex_docs" + +else + enable_latex_docs=no +fi; +if test "x$enable_doxygen" = xno; then + enable_doc=no +else + # Extract the first word of "doxygen", so it can be a program name with args. +set dummy doxygen; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_path_DOXYGEN+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + case $DOXYGEN in + [\\/]* | ?:[\\/]*) + ac_cv_path_DOXYGEN="$DOXYGEN" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_DOXYGEN="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + ;; +esac fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - +DOXYGEN=$ac_cv_path_DOXYGEN +if test -n "$DOXYGEN"; then + echo "$as_me:$LINENO: result: $DOXYGEN" >&5 +echo "${ECHO_T}$DOXYGEN" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -echo "$as_me:$LINENO: result: $ac_cv_cxx_gcc_abi_demangle" >&5 -echo "${ECHO_T}$ac_cv_cxx_gcc_abi_demangle" >&6 -if test "$ac_cv_cxx_gcc_abi_demangle" = yes; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_GCC_ABI_DEMANGLE 1 -_ACEOF + if test "x$DOXYGEN" = x; then + if test "x$enable_doxygen" = xyes; then + { { echo "$as_me:$LINENO: error: could not find doxygen" >&5 +echo "$as_me: error: could not find doxygen" >&2;} + { (exit 1); exit 1; }; } + fi + enable_doc=no + else + enable_doc=yes + # Extract the first word of "dot", so it can be a program name with args. +set dummy dot; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_path_DOT+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + case $DOT in + [\\/]* | ?:[\\/]*) + ac_cv_path_DOT="$DOT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_DOT="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + ;; +esac fi +DOT=$ac_cv_path_DOT -echo "$as_me:$LINENO: checking whether the compiler implements namespaces" >&5 -echo $ECHO_N "checking whether the compiler implements namespaces... $ECHO_C" >&6 -if test "${ac_cv_cxx_namespaces+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +if test -n "$DOT"; then + echo "$as_me:$LINENO: result: $DOT" >&5 +echo "${ECHO_T}$DOT" >&6 else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + fi +fi - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -namespace Outer { namespace Inner { int i = 0; }} -int -main () -{ -using namespace Outer::Inner; return i; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_cxx_namespaces=yes +if test x$enable_doc = xyes; then + DOC_TRUE= + DOC_FALSE='#' else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_cxx_namespaces=no + DOC_TRUE='#' + DOC_FALSE= fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +if test x$DOT = x; then + if test "x$enable_dot" = xyes; then + { { echo "$as_me:$LINENO: error: could not find dot" >&5 +echo "$as_me: error: could not find dot" >&2;} + { (exit 1); exit 1; }; } + fi + enable_dot=no +else + enable_dot=yes fi -echo "$as_me:$LINENO: result: $ac_cv_cxx_namespaces" >&5 -echo "${ECHO_T}$ac_cv_cxx_namespaces" >&6 -if test "$ac_cv_cxx_namespaces" = yes; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_NAMESPACES 1 -_ACEOF -fi -echo "$as_me:$LINENO: checking whether std::string::compare takes a string in argument 1" >&5 -echo $ECHO_N "checking whether std::string::compare takes a string in argument 1... $ECHO_C" >&6 -if test "${ac_cv_cxx_string_compare_string_first+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +# Check for headers +# Note that the fourth argument to AC_CHECK_HEADERS is non-empty to force +# the configure probe to try compiling "#include
". See autoconf docs. +# ---------------------------------------------------------------------------- - cat >conftest.$ac_ext <<_ACEOF + +for ac_header in cmath +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include -#ifdef HAVE_NAMESPACES -using namespace std; -#endif -int -main () -{ -string x("hi"); string y("h"); -return x.compare(y,0,1) == 0; - ; - return 0; -} +/**/ + +#include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 @@ -5088,40 +19982,37 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_cxx_string_compare_string_first=yes + eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_cxx_string_compare_string_first=no +eval "$as_ac_Header=no" fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - fi -echo "$as_me:$LINENO: result: $ac_cv_cxx_string_compare_string_first" >&5 -echo "${ECHO_T}$ac_cv_cxx_string_compare_string_first" >&6 -if test "$ac_cv_cxx_string_compare_string_first" = yes; then - -cat >>confdefs.h <<\_ACEOF -#define FUNC_STRING_COMPARE_STRING_FIRST 1 +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi -echo "$as_me:$LINENO: checking whether the compiler has stringstream" >&5 -echo $ECHO_N "checking whether the compiler has stringstream... $ECHO_C" >&6 -if test "${ac_cv_cxx_have_sstream+set}" = set; then +done + + +# Check for compiler characteristics +# ---------------------------------------------------------------------------- + +echo "$as_me:$LINENO: checking whether the compiler supports Run-Time Type Identification" >&5 +echo $ECHO_N "checking whether the compiler supports Run-Time Type Identification... $ECHO_C" >&6 +if test "${ac_cv_cxx_rtti+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -5134,14 +20025,23 @@ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include -#ifdef HAVE_NAMESPACES -using namespace std; -#endif +#include +class Base { public : + Base () {} + virtual int f () { return 0; } + }; +class Derived : public Base { public : + Derived () {} + virtual int f () { return 1; } + }; + int main () { -stringstream message; message << "Hello"; return 0; +Derived d; +Base *ptr = &d; +return typeid (*ptr) == typeid (Derived); + ; return 0; } @@ -5168,12 +20068,12 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_cxx_have_sstream=yes + ac_cv_cxx_rtti=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_cxx_have_sstream=no +ac_cv_cxx_rtti=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_ext=cc @@ -5184,282 +20084,132 @@ ac_compiler_gnu=$ac_cv_cxx_compiler_gnu fi -echo "$as_me:$LINENO: result: $ac_cv_cxx_have_sstream" >&5 -echo "${ECHO_T}$ac_cv_cxx_have_sstream" >&6 -if test "$ac_cv_cxx_have_sstream" = yes; then +echo "$as_me:$LINENO: result: $ac_cv_cxx_rtti" >&5 +echo "${ECHO_T}$ac_cv_cxx_rtti" >&6 +if test "$ac_cv_cxx_rtti" = yes; then cat >>confdefs.h <<\_ACEOF -#define HAVE_SSTREAM 1 +#define HAVE_RTTI 1 _ACEOF fi -ac_ext=cc +echo "$as_me:$LINENO: checking whether the compiler supports GCC C++ ABI name demangling" >&5 +echo $ECHO_N "checking whether the compiler supports GCC C++ ABI name demangling... $ECHO_C" >&6 +if test "${ac_cv_cxx_gcc_abi_demangle+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + + ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 -echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6 -if test -z "$CXXCPP"; then - if test "${ac_cv_prog_CXXCPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Double quotes because CXXCPP needs to be expanded - for CXXCPP in "$CXX -E" "/lib/cpp" - do - ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF + + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +#include +#include +#include - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext +template +class A {}; - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +int +main () +{ +A instance; +int status = 0; +char* c_name = 0; - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext +c_name = abi::__cxa_demangle(typeid(instance).name(), 0, 0, &status); -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi +std::string name(c_name); +free(c_name); - done - ac_cv_prog_CXXCPP=$CXXCPP +return name == "A"; -fi - CXXCPP=$ac_cv_prog_CXXCPP -else - ac_cv_prog_CXXCPP=$CXXCPP -fi -echo "$as_me:$LINENO: result: $CXXCPP" >&5 -echo "${ECHO_T}$CXXCPP" >&6 -ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error + ; + return 0; +} _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_cxx_gcc_abi_demangle=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details." >&5 -echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } +ac_cv_cxx_gcc_abi_demangle=no fi - -ac_ext=cc +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -echo "$as_me:$LINENO: checking for egrep" >&5 -echo $ECHO_N "checking for egrep... $ECHO_C" >&6 -if test "${ac_cv_prog_egrep+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' - fi fi -echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 -echo "${ECHO_T}$ac_cv_prog_egrep" >&6 - EGREP=$ac_cv_prog_egrep +echo "$as_me:$LINENO: result: $ac_cv_cxx_gcc_abi_demangle" >&5 +echo "${ECHO_T}$ac_cv_cxx_gcc_abi_demangle" >&6 +if test "$ac_cv_cxx_gcc_abi_demangle" = yes; then +cat >>confdefs.h <<\_ACEOF +#define HAVE_GCC_ABI_DEMANGLE 1 +_ACEOF -echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 -if test "${ac_cv_header_stdc+set}" = set; then +fi + +echo "$as_me:$LINENO: checking whether the compiler implements namespaces" >&5 +echo $ECHO_N "checking whether the compiler implements namespaces... $ECHO_C" >&6 +if test "${ac_cv_cxx_namespaces+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat >conftest.$ac_ext <<_ACEOF + + + ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include -#include -#include -#include - +namespace Outer { namespace Inner { int i = 0; }} int main () { - +using namespace Outer::Inner; return i; ; return 0; } @@ -5486,154 +20236,144 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_header_stdc=yes + ac_cv_cxx_namespaces=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_header_stdc=no +ac_cv_cxx_namespaces=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* fi +echo "$as_me:$LINENO: result: $ac_cv_cxx_namespaces" >&5 +echo "${ECHO_T}$ac_cv_cxx_namespaces" >&6 +if test "$ac_cv_cxx_namespaces" = yes; then -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - +cat >>confdefs.h <<\_ACEOF +#define HAVE_NAMESPACES 1 _ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* fi -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : +echo "$as_me:$LINENO: checking whether std::string::compare takes a string in argument 1" >&5 +echo $ECHO_N "checking whether std::string::compare takes a string in argument 1... $ECHO_C" >&6 +if test "${ac_cv_cxx_string_compare_string_first+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat >conftest.$ac_ext <<_ACEOF + + + + ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#include +#ifdef HAVE_NAMESPACES +using namespace std; #endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - exit(2); - exit (0); +string x("hi"); string y("h"); +return x.compare(y,0,1) == 0; + ; + return 0; } _ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - : + ac_cv_cxx_string_compare_string_first=yes else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 + echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi +ac_cv_cxx_string_compare_string_first=no fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + + fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6 -if test $ac_cv_header_stdc = yes; then +echo "$as_me:$LINENO: result: $ac_cv_cxx_string_compare_string_first" >&5 +echo "${ECHO_T}$ac_cv_cxx_string_compare_string_first" >&6 +if test "$ac_cv_cxx_string_compare_string_first" = yes; then cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 +#define FUNC_STRING_COMPARE_STRING_FIRST 1 _ACEOF fi -# On IRIX 5.3, sys/types and inttypes.h are conflicting. - - - - - +echo "$as_me:$LINENO: checking whether the compiler has stringstream" >&5 +echo $ECHO_N "checking whether the compiler has stringstream... $ECHO_C" >&6 +if test "${ac_cv_cxx_have_sstream+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -$ac_includes_default - -#include <$ac_header> +#include +#ifdef HAVE_NAMESPACES +using namespace std; +#endif +int +main () +{ +stringstream message; message << "Hello"; return 0; + ; + return 0; +} _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 @@ -5657,26 +20397,32 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - eval "$as_ac_Header=yes" + ac_cv_cxx_have_sstream=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -eval "$as_ac_Header=no" +ac_cv_cxx_have_sstream=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + + fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +echo "$as_me:$LINENO: result: $ac_cv_cxx_have_sstream" >&5 +echo "${ECHO_T}$ac_cv_cxx_have_sstream" >&6 +if test "$ac_cv_cxx_have_sstream" = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_SSTREAM 1 _ACEOF fi -done - echo "$as_me:$LINENO: checking whether the library defines class strstream" >&5 echo $ECHO_N "checking whether the library defines class strstream... $ECHO_C" >&6 @@ -6699,9 +21445,18 @@ s,@host@,$host,;t t s,@host_cpu@,$host_cpu,;t t s,@host_vendor@,$host_vendor,;t t s,@host_os@,$host_os,;t t +s,@EGREP@,$EGREP,;t t +s,@LN_S@,$LN_S,;t t +s,@ECHO@,$ECHO,;t t +s,@AR@,$AR,;t t +s,@ac_ct_AR@,$ac_ct_AR,;t t s,@RANLIB@,$RANLIB,;t t s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t -s,@LN_S@,$LN_S,;t t +s,@CPP@,$CPP,;t t +s,@CXXCPP@,$CXXCPP,;t t +s,@F77@,$F77,;t t +s,@FFLAGS@,$FFLAGS,;t t +s,@ac_ct_F77@,$ac_ct_F77,;t t s,@LIBTOOL@,$LIBTOOL,;t t s,@LIBADD_DL@,$LIBADD_DL,;t t s,@DOXYGEN@,$DOXYGEN,;t t @@ -6711,8 +21466,6 @@ s,@DOC_FALSE@,$DOC_FALSE,;t t s,@enable_dot@,$enable_dot,;t t s,@enable_html_docs@,$enable_html_docs,;t t s,@enable_latex_docs@,$enable_latex_docs,;t t -s,@CXXCPP@,$CXXCPP,;t t -s,@EGREP@,$EGREP,;t t s,@LIBOBJS@,$LIBOBJS,;t t s,@LTLIBOBJS@,$LTLIBOBJS,;t t CEOF diff --git a/lib/cppunit-1.10.0/doc/Makefile.in b/lib/cppunit-1.10.0/doc/Makefile.in index 4333f16b27..1f9ec60312 100644 --- a/lib/cppunit-1.10.0/doc/Makefile.in +++ b/lib/cppunit-1.10.0/doc/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/examples/ClockerPlugIn/Makefile.in b/lib/cppunit-1.10.0/examples/ClockerPlugIn/Makefile.in index 79166cf70b..306157e15d 100644 --- a/lib/cppunit-1.10.0/examples/ClockerPlugIn/Makefile.in +++ b/lib/cppunit-1.10.0/examples/ClockerPlugIn/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/examples/DumperPlugIn/Makefile.in b/lib/cppunit-1.10.0/examples/DumperPlugIn/Makefile.in index 860ebbab3e..fe359cbfeb 100644 --- a/lib/cppunit-1.10.0/examples/DumperPlugIn/Makefile.in +++ b/lib/cppunit-1.10.0/examples/DumperPlugIn/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/examples/Makefile.in b/lib/cppunit-1.10.0/examples/Makefile.in index e0c0edda2f..a295272d3e 100644 --- a/lib/cppunit-1.10.0/examples/Makefile.in +++ b/lib/cppunit-1.10.0/examples/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/examples/cppunittest/Makefile.in b/lib/cppunit-1.10.0/examples/cppunittest/Makefile.in index bfe2de3d1e..9f66dae4e5 100644 --- a/lib/cppunit-1.10.0/examples/cppunittest/Makefile.in +++ b/lib/cppunit-1.10.0/examples/cppunittest/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/examples/hierarchy/Makefile.in b/lib/cppunit-1.10.0/examples/hierarchy/Makefile.in index 1e2bbfadbe..8bbb662d11 100644 --- a/lib/cppunit-1.10.0/examples/hierarchy/Makefile.in +++ b/lib/cppunit-1.10.0/examples/hierarchy/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/examples/money/Makefile.in b/lib/cppunit-1.10.0/examples/money/Makefile.in index 8f60374538..905cafe254 100644 --- a/lib/cppunit-1.10.0/examples/money/Makefile.in +++ b/lib/cppunit-1.10.0/examples/money/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/examples/simple/Makefile.in b/lib/cppunit-1.10.0/examples/simple/Makefile.in index aca6431da1..b0ebb9f7d5 100644 --- a/lib/cppunit-1.10.0/examples/simple/Makefile.in +++ b/lib/cppunit-1.10.0/examples/simple/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/include/Makefile.in b/lib/cppunit-1.10.0/include/Makefile.in index f386a379ee..85c024fad0 100644 --- a/lib/cppunit-1.10.0/include/Makefile.in +++ b/lib/cppunit-1.10.0/include/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/include/cppunit/Makefile.in b/lib/cppunit-1.10.0/include/cppunit/Makefile.in index c79bbe4ad7..e34f3304a5 100644 --- a/lib/cppunit-1.10.0/include/cppunit/Makefile.in +++ b/lib/cppunit-1.10.0/include/cppunit/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/include/cppunit/config/Makefile.in b/lib/cppunit-1.10.0/include/cppunit/config/Makefile.in index 19f6343066..94fed96a84 100644 --- a/lib/cppunit-1.10.0/include/cppunit/config/Makefile.in +++ b/lib/cppunit-1.10.0/include/cppunit/config/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/include/cppunit/extensions/Makefile.in b/lib/cppunit-1.10.0/include/cppunit/extensions/Makefile.in index eed2f23d3c..7a8608a5cb 100644 --- a/lib/cppunit-1.10.0/include/cppunit/extensions/Makefile.in +++ b/lib/cppunit-1.10.0/include/cppunit/extensions/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/include/cppunit/plugin/Makefile.in b/lib/cppunit-1.10.0/include/cppunit/plugin/Makefile.in index a655f08426..e93ca77c61 100644 --- a/lib/cppunit-1.10.0/include/cppunit/plugin/Makefile.in +++ b/lib/cppunit-1.10.0/include/cppunit/plugin/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/include/cppunit/portability/Makefile.in b/lib/cppunit-1.10.0/include/cppunit/portability/Makefile.in index f2ce65d2e4..cc444f0373 100644 --- a/lib/cppunit-1.10.0/include/cppunit/portability/Makefile.in +++ b/lib/cppunit-1.10.0/include/cppunit/portability/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/include/cppunit/tools/Makefile.in b/lib/cppunit-1.10.0/include/cppunit/tools/Makefile.in index 23980d0bb9..2dd4743124 100644 --- a/lib/cppunit-1.10.0/include/cppunit/tools/Makefile.in +++ b/lib/cppunit-1.10.0/include/cppunit/tools/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/include/cppunit/ui/Makefile.in b/lib/cppunit-1.10.0/include/cppunit/ui/Makefile.in index b3daa62417..52213aaead 100644 --- a/lib/cppunit-1.10.0/include/cppunit/ui/Makefile.in +++ b/lib/cppunit-1.10.0/include/cppunit/ui/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/include/cppunit/ui/mfc/Makefile.in b/lib/cppunit-1.10.0/include/cppunit/ui/mfc/Makefile.in index 7ecc3fb4f8..0f880ed7c7 100644 --- a/lib/cppunit-1.10.0/include/cppunit/ui/mfc/Makefile.in +++ b/lib/cppunit-1.10.0/include/cppunit/ui/mfc/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/include/cppunit/ui/qt/Makefile.in b/lib/cppunit-1.10.0/include/cppunit/ui/qt/Makefile.in index 50d9444570..6758a67dc8 100644 --- a/lib/cppunit-1.10.0/include/cppunit/ui/qt/Makefile.in +++ b/lib/cppunit-1.10.0/include/cppunit/ui/qt/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/include/cppunit/ui/text/Makefile.in b/lib/cppunit-1.10.0/include/cppunit/ui/text/Makefile.in index a98e23c8e6..c2346aa431 100644 --- a/lib/cppunit-1.10.0/include/cppunit/ui/text/Makefile.in +++ b/lib/cppunit-1.10.0/include/cppunit/ui/text/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/src/DllPlugInTester/Makefile.in b/lib/cppunit-1.10.0/src/DllPlugInTester/Makefile.in index 685d84ab91..dab7ec9356 100644 --- a/lib/cppunit-1.10.0/src/DllPlugInTester/Makefile.in +++ b/lib/cppunit-1.10.0/src/DllPlugInTester/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/src/Makefile.in b/lib/cppunit-1.10.0/src/Makefile.in index 20ed477988..3cfd68ab08 100644 --- a/lib/cppunit-1.10.0/src/Makefile.in +++ b/lib/cppunit-1.10.0/src/Makefile.in @@ -40,6 +40,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -47,6 +48,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -65,11 +67,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -102,8 +107,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/cppunit-1.10.0/src/cppunit/Makefile.in b/lib/cppunit-1.10.0/src/cppunit/Makefile.in index bb45b4c97e..c872e73d36 100644 --- a/lib/cppunit-1.10.0/src/cppunit/Makefile.in +++ b/lib/cppunit-1.10.0/src/cppunit/Makefile.in @@ -15,7 +15,7 @@ @SET_MAKE@ # -# $Id: Makefile.in,v 1.6 2004/12/27 11:31:09 hno Exp $ +# $Id: Makefile.in,v 1.7 2004/12/27 12:08:40 hno Exp $ # srcdir = @srcdir@ @@ -44,6 +44,7 @@ ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -51,6 +52,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ +CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPUNIT_BINARY_AGE = @CPPUNIT_BINARY_AGE@ CPPUNIT_INTERFACE_AGE = @CPPUNIT_INTERFACE_AGE@ @@ -69,11 +71,14 @@ DOC_FALSE = @DOC_FALSE@ DOC_TRUE = @DOC_TRUE@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ +ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -106,8 +111,10 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ diff --git a/lib/libTrie/Makefile.in b/lib/libTrie/Makefile.in index 7f577f3f49..028d75b704 100644 --- a/lib/libTrie/Makefile.in +++ b/lib/libTrie/Makefile.in @@ -15,7 +15,7 @@ @SET_MAKE@ # -# $Id: Makefile.in,v 1.15 2004/12/27 11:31:10 hno Exp $ +# $Id: Makefile.in,v 1.16 2004/12/27 12:12:13 hno Exp $ # srcdir = @srcdir@ @@ -140,8 +140,7 @@ DIST_COMMON = README AUTHORS COPYING ChangeLog INSTALL Makefile.am \ Makefile.in NEWS acinclude.m4 aclocal.m4 cfgaux/config.guess \ cfgaux/config.sub cfgaux/depcomp cfgaux/install-sh \ cfgaux/ltmain.sh cfgaux/missing cfgaux/mkinstalldirs \ - config.guess config.h.in config.sub configure configure.in \ - depcomp install-sh ltmain.sh missing mkinstalldirs + config.h.in configure configure.in all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive