From: Junhui Liu <junhui.liu@pigmoral.tech>
Date: Tue, 21 Oct 2025 09:41:47 +0000 (+0800)
Subject: riscv: dts: anlogic: Add Milianke MLKPAI FS01 board
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=7e6fd69c12f464c21e489aba763f0cef5cdd1373;p=thirdparty%2Flinux.git

riscv: dts: anlogic: Add Milianke MLKPAI FS01 board

Add support for the Milianke MLKPAI FS01 board based on the Anlogic
DR1V90 SoC. The board features 512MB of onboard memory, USB-C UART, 1GbE
RJ45 Ethernet, USB-A 2.0 port, TF card slot, and 256Mbit Quad-SPI flash.

Currently, the board can boot to a console via UART1, which is connected
to the onboard serial chip and routed to the Type-C interface.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---

diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
index 3763d199c70ac..f99d38ee1aad2 100644
--- a/arch/riscv/boot/dts/Makefile
+++ b/arch/riscv/boot/dts/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 subdir-y += allwinner
 subdir-y += andes
+subdir-y += anlogic
 subdir-y += canaan
 subdir-y += eswin
 subdir-y += microchip
diff --git a/arch/riscv/boot/dts/anlogic/Makefile b/arch/riscv/boot/dts/anlogic/Makefile
new file mode 100644
index 0000000000000..87f3b2f418cfa
--- /dev/null
+++ b/arch/riscv/boot/dts/anlogic/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ANLOGIC) += dr1v90-mlkpai-fs01.dtb
diff --git a/arch/riscv/boot/dts/anlogic/dr1v90-mlkpai-fs01.dts b/arch/riscv/boot/dts/anlogic/dr1v90-mlkpai-fs01.dts
new file mode 100644
index 0000000000000..597407655efd2
--- /dev/null
+++ b/arch/riscv/boot/dts/anlogic/dr1v90-mlkpai-fs01.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 Junhui Liu <junhui.liu@pigmoral.tech>
+ */
+
+#include "dr1v90.dtsi"
+
+/ {
+	model = "Milianke MLKPAI-FS01";
+	compatible = "milianke,mlkpai-fs01", "anlogic,dr1v90";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x20000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};