From: Christian Marangi <ansuelsmth@gmail.com>
Date: Sat, 20 Sep 2025 16:09:42 +0000 (+0200)
Subject: net: mediatek: mt7988: restore PHY page on PHY setting exit
X-Git-Tag: v2026.01-rc1~12^2~9
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=85f3d070e27c3024c6d2c58ecbfd0ecb2343cc0c;p=thirdparty%2Fu-boot.git

net: mediatek: mt7988: restore PHY page on PHY setting exit

On exiting the phy_setting function for MT7988, the PHY page is never
restored to Page 0. This can cause all kind of problem with reading the
status of the PHY at runtime.

Correctly restore PHY page on exiting the PHY setting function.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---

diff --git a/drivers/net/mtk_eth/mt7988.c b/drivers/net/mtk_eth/mt7988.c
index 87b6ed30cd0..06bbe049da3 100644
--- a/drivers/net/mtk_eth/mt7988.c
+++ b/drivers/net/mtk_eth/mt7988.c
@@ -34,8 +34,10 @@ static void mt7988_phy_setting(struct mt753x_switch_priv *priv)
 	u32 i;
 
 	for (i = 0; i < MT753X_NUM_PHYS; i++) {
-		/* Enable HW auto downshift */
+		/* Set PHY to PHY page 1 */
 		mt7531_mii_write(priv, i, 0x1f, 0x1);
+
+		/* Enable HW auto downshift */
 		val = mt7531_mii_read(priv, i, PHY_EXT_REG_14);
 		val |= PHY_EN_DOWN_SHFIT;
 		mt7531_mii_write(priv, i, PHY_EXT_REG_14, val);
@@ -44,6 +46,9 @@ static void mt7988_phy_setting(struct mt753x_switch_priv *priv)
 		val = mt7531_mii_read(priv, i, PHY_EXT_REG_17);
 		val |= PHY_LINKDOWN_POWER_SAVING_EN;
 		mt7531_mii_write(priv, i, PHY_EXT_REG_17, val);
+
+		/* Restore PHY to PHY page 0 */
+		mt7531_mii_write(priv, i, 0x1f, 0x0);
 	}
 }