From: Marek Vasut Date: Mon, 22 Sep 2025 11:48:27 +0000 (+0200) Subject: fw_loader: Split from fs_loader into separate library file X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=8aa57934e52f254064338cfb2a445af9a1f592f9;p=thirdparty%2Fu-boot.git fw_loader: Split from fs_loader into separate library file The script based firmware loader does not use anything from the fs_loader implementation. Separate it into its own library source file and convert the mediatek PHY to use this separate code. This should reduce the amount of code that is pulled in alongside the firmware loader, as the FS loader is no longer included. Signed-off-by: Marek Vasut --- diff --git a/drivers/misc/fs_loader.c b/drivers/misc/fs_loader.c index d641647e040..2928cf75f89 100644 --- a/drivers/misc/fs_loader.c +++ b/drivers/misc/fs_loader.c @@ -228,53 +228,6 @@ int request_firmware_into_buf(struct udevice *dev, return ret; } -int request_firmware_into_buf_via_script(void *buf, size_t max_size, - const char *script_name, - size_t *retsize) -{ - char *args[2] = { "run", (char *)script_name }; - int ret, repeatable; - ulong addr, size; - - if (!buf || !script_name || !max_size) - return -EINVAL; - - /* Run the firmware loading script */ - ret = cmd_process(0, 2, args, &repeatable, NULL); - if (ret) { - log_err("Firmware loading script '%s' not defined or failed.\n", - script_name); - return -EINVAL; - } - - /* Find out where the firmware got loaded and how long it is */ - addr = env_get_hex("fw_addr", 0); - size = env_get_hex("fw_size", 0); - - /* Clear the variables set by the firmware loading script */ - env_set("fw_addr", NULL); - env_set("fw_size", NULL); - - if (!addr || !size) { - log_err("Firmware address (0x%lx) or size (0x%lx) are invalid.\n", - addr, size); - return -EINVAL; - } - - if (size > max_size) { - log_err("Loaded firmware size 0x%lx exceeded maximum allowed size 0x%zx.\n", - size, max_size); - return -E2BIG; - } - - if (retsize) - *retsize = size; - - memcpy(buf, (void *)addr, size); - - return 0; -} - static int fs_loader_of_to_plat(struct udevice *dev) { u32 phandlepart[2]; diff --git a/drivers/net/phy/mediatek/Kconfig b/drivers/net/phy/mediatek/Kconfig index bbda951e7d9..933271f01fa 100644 --- a/drivers/net/phy/mediatek/Kconfig +++ b/drivers/net/phy/mediatek/Kconfig @@ -6,8 +6,8 @@ config MTK_NET_PHYLIB config PHY_MEDIATEK_2P5GE bool "MediaTek built-in 2.5Gb ethernet PHYs" depends on OF_CONTROL && (TARGET_MT7987 || TARGET_MT7988) + select FW_LOADER select MTK_NET_PHYLIB - select FS_LOADER help Supports MediaTek SoC built-in 2.5Gb ethernet PHYs. diff --git a/drivers/net/phy/mediatek/mtk-2p5ge.c b/drivers/net/phy/mediatek/mtk-2p5ge.c index 0e704bdb04d..4090db0b474 100644 --- a/drivers/net/phy/mediatek/mtk-2p5ge.c +++ b/drivers/net/phy/mediatek/mtk-2p5ge.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/include/fs_loader.h b/include/fs_loader.h index 3afd9e62b4a..7e16e0f7030 100644 --- a/include/fs_loader.h +++ b/include/fs_loader.h @@ -65,29 +65,4 @@ int request_firmware_into_buf(struct udevice *dev, */ int get_fs_loader(struct udevice **dev); -/** - * request_firmware_into_buf_via_script() - - * Load firmware using a U-Boot script and copy to buffer - * @buf: Pointer to a pointer where the firmware buffer will be stored. - * @max_size: Maximum allowed size for the firmware to be loaded. - * @script_name: Name of the U-Boot script to execute for firmware loading. - * @retsize: Return the actual firmware data size (optional). - * - * Executes a U-Boot script (@script_name) that loads firmware into - * memory and sets the environment variables 'fw_addr' (address) and - * 'fw_size' (size in bytes). On success, copies the firmware - * from the given address to user buffer @buf. - * - * The script must set these environment variables: - * fw_addr - Address where firmware is loaded in memory - * fw_size - Size of the firmware in bytes - * - * The script should be defined in the U-Boot environment, for example: - * env set script_name 'load mmc 0:1 ${loadaddr} firmware.bin && - * env set fw_addr ${loadaddr} && env set fw_size ${filesize} - * Return: 0 on success, negative value on error. - */ -int request_firmware_into_buf_via_script(void *buf, size_t max_size, - const char *script_name, - size_t *retsize); #endif diff --git a/include/fw_loader.h b/include/fw_loader.h new file mode 100644 index 00000000000..35574482b2b --- /dev/null +++ b/include/fw_loader.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2025 Lucien Jheng + */ +#ifndef _FW_LOADER_H_ +#define _FW_LOADER_H_ + +/** + * request_firmware_into_buf_via_script() - + * Load firmware using a U-Boot script and copy to buffer + * @buf: Pointer to a pointer where the firmware buffer will be stored. + * @max_size: Maximum allowed size for the firmware to be loaded. + * @script_name: Name of the U-Boot script to execute for firmware loading. + * @retsize: Return the actual firmware data size (optional). + * + * Executes a U-Boot script (@script_name) that loads firmware into + * memory and sets the environment variables 'fw_addr' (address) and + * 'fw_size' (size in bytes). On success, copies the firmware + * from the given address to user buffer @buf. + * + * The script must set these environment variables: + * fw_addr - Address where firmware is loaded in memory + * fw_size - Size of the firmware in bytes + * + * The script should be defined in the U-Boot environment, for example: + * env set script_name 'load mmc 0:1 ${loadaddr} firmware.bin && + * env set fw_addr ${loadaddr} && env set fw_size ${filesize} + * Return: 0 on success, negative value on error. + */ +int request_firmware_into_buf_via_script(void *buf, size_t max_size, + const char *script_name, + size_t *retsize); + +#endif diff --git a/lib/Kconfig b/lib/Kconfig index 7e48b179f6d..f5c1731f456 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -71,6 +71,14 @@ config DYNAMIC_CRC_TABLE Enable this option to calculate entries for CRC tables at runtime. This can be helpful when reducing the size of the build image +config FW_LOADER + bool "Enable firmware loader using environment script" + depends on CMDLINE + depends on ENV_SUPPORT + help + Enable this option to make firmware loading using user-provided + U-Boot environment script functionality accessible to U-Boot code. + config HAVE_ARCH_IOMAP bool help diff --git a/lib/Makefile b/lib/Makefile index 2643bfc867c..a2e60668864 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -22,6 +22,8 @@ obj-$(CONFIG_AES) += aes.o obj-$(CONFIG_AES) += aes/ obj-$(CONFIG_$(PHASE_)BINMAN_FDT) += binman.o +obj-$(CONFIG_FW_LOADER) += fw_loader.o + ifndef API_BUILD ifneq ($(CONFIG_CHARSET),) obj-y += charset.o diff --git a/lib/fw_loader.c b/lib/fw_loader.c new file mode 100644 index 00000000000..207f5fadd1e --- /dev/null +++ b/lib/fw_loader.c @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2025 Lucien Jheng + */ + +#include +#include +#include +#include +#include + +int request_firmware_into_buf_via_script(void *buf, size_t max_size, + const char *script_name, + size_t *retsize) +{ + char *args[2] = { "run", (char *)script_name }; + int ret, repeatable; + ulong addr, size; + + if (!buf || !script_name || !max_size) + return -EINVAL; + + /* Run the firmware loading script */ + ret = cmd_process(0, 2, args, &repeatable, NULL); + if (ret) { + log_err("Firmware loading script '%s' not defined or failed.\n", + script_name); + return -EINVAL; + } + + /* Find out where the firmware got loaded and how long it is */ + addr = env_get_hex("fw_addr", 0); + size = env_get_hex("fw_size", 0); + + /* Clear the variables set by the firmware loading script */ + env_set("fw_addr", NULL); + env_set("fw_size", NULL); + + if (!addr || !size) { + log_err("Firmware address (0x%lx) or size (0x%lx) are invalid.\n", + addr, size); + return -EINVAL; + } + + if (size > max_size) { + log_err("Loaded firmware size 0x%lx exceeded maximum allowed size 0x%zx.\n", + size, max_size); + return -E2BIG; + } + + if (retsize) + *retsize = size; + + memcpy(buf, (void *)addr, size); + + return 0; +}