From: Thierry Reding Date: Tue, 8 Sep 2015 09:38:04 +0000 (+0200) Subject: ARM: tegra114: Clear IDDQ when enabling PLLC X-Git-Tag: v2015.10-rc4~27 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=8e1601d994e2fa8b8c7826470c3d923a684492a4;p=thirdparty%2Fu-boot.git ARM: tegra114: Clear IDDQ when enabling PLLC Enabling a PLL while IDDQ is high. The Linux kernel checks for this condition and warns about it verbosely, so while this seems to work fine, fix it up according to the programming guidelines provided in the Tegra K1 TRM (v02p), Section 5.3.8.1 ("PLLC and PLLC4 Startup Sequence"). The Tegra114 TRM doesn't contain this information, but the programming of PLLC is the same on Tegra114 and Tegra124. Signed-off-by: Thierry Reding Signed-off-by: Tom Warren --- diff --git a/arch/arm/include/asm/arch-tegra114/clock.h b/arch/arm/include/asm/arch-tegra114/clock.h index abbefcd0e45..9bee3977874 100644 --- a/arch/arm/include/asm/arch-tegra114/clock.h +++ b/arch/arm/include/asm/arch-tegra114/clock.h @@ -25,4 +25,7 @@ #define OSC_FREQ_SHIFT 28 #define OSC_FREQ_MASK (0xF << OSC_FREQ_SHIFT) +/* CLK_RST_CONTROLLER_PLLC_MISC_0 */ +#define PLLC_IDDQ (1 << 26) + #endif /* _TEGRA114_CLOCK_H_ */ diff --git a/arch/arm/mach-tegra/tegra114/clock.c b/arch/arm/mach-tegra/tegra114/clock.c index cec843b27df..e6ef873c8dc 100644 --- a/arch/arm/mach-tegra/tegra114/clock.c +++ b/arch/arm/mach-tegra/tegra114/clock.c @@ -629,6 +629,11 @@ void clock_early_init(void) tegra30_set_up_pllp(); + /* clear IDDQ before accessing any other PLLC registers */ + pllinfo = &tegra_pll_info_table[CLOCK_ID_CGENERAL]; + clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc, PLLC_IDDQ); + udelay(2); + /* * PLLC output frequency set to 600Mhz * PLLD output frequency set to 925Mhz