From: Stefan Kerkmann Date: Tue, 26 Nov 2024 09:22:13 +0000 (+0100) Subject: ARM: dts: imx6qdl: add phy-3p0-supply to usb phys X-Git-Tag: v6.14-rc1~103^2~23^2~5 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=92021d3e86aa40432da46cadd4e3f324272596fa;p=thirdparty%2Fkernel%2Flinux.git ARM: dts: imx6qdl: add phy-3p0-supply to usb phys The integrated usb phys are supplied by the 3p0 regulator, which has a voltage range of 2.625V to 3.4V. Thus the min and max values are corrected and the regulator added as a proper supply for the usb phys. This fixes the following warnings during the probe of the mxs_phy driver: mxs_phy 20c9000.usbphy: supply phy-3p0 not found, using dummy regulator mxs_phy 20ca000.usbphy: supply phy-3p0 not found, using dummy regulator The 3p0 regulator handling was introduced by commit 966d73152078 ("usb: phy: mxs: enable regulator phy-3p0 to improve signal qualilty")`. Signed-off-by: Stefan Kerkmann Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi index d2200c9db25ae..45bcfd7faf9db 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi @@ -711,8 +711,8 @@ reg_vdd3p0: regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3150000>; + regulator-min-microvolt = <2625000>; + regulator-max-microvolt = <3400000>; regulator-always-on; anatop-reg-offset = <0x120>; anatop-vol-bit-shift = <8>; @@ -806,6 +806,7 @@ reg = <0x020c9000 0x1000>; interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBPHY1>; + phy-3p0-supply = <®_vdd3p0>; fsl,anatop = <&anatop>; }; @@ -814,6 +815,7 @@ reg = <0x020ca000 0x1000>; interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBPHY2>; + phy-3p0-supply = <®_vdd3p0>; fsl,anatop = <&anatop>; };