From: Oleksij Rempel Date: Sat, 18 Jun 2022 12:23:33 +0000 (+0200) Subject: net: phy: at803x: fix NULL pointer dereference on AR9331 PHY X-Git-Tag: v5.19-rc4~38^2~16 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=9926de7315be3d606cc011a305ad9adb9e8e14c9;p=thirdparty%2Fkernel%2Flinux.git net: phy: at803x: fix NULL pointer dereference on AR9331 PHY Latest kernel will explode on the PHY interrupt config, since it depends now on allocated priv. So, run probe to allocate priv to fix it. ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) CPU 0 Unable to handle kernel paging request at virtual address 0000000a, epc == 8050e8a8, ra == 80504b34 ... Call Trace: [<8050e8a8>] at803x_config_intr+0x5c/0xd0 [<80504b34>] phy_request_interrupt+0xa8/0xd0 [<8050289c>] phylink_bringup_phy+0x2d8/0x3ac [<80502b68>] phylink_fwnode_phy_connect+0x118/0x130 [<8074d8ec>] dsa_slave_create+0x270/0x420 [<80743b04>] dsa_port_setup+0x12c/0x148 [<8074580c>] dsa_register_switch+0xaf0/0xcc0 [<80511344>] ar9331_sw_probe+0x370/0x388 [<8050cb78>] mdio_probe+0x44/0x70 [<804df300>] really_probe+0x200/0x424 [<804df7b4>] __driver_probe_device+0x290/0x298 [<804df810>] driver_probe_device+0x54/0xe4 [<804dfd50>] __device_attach_driver+0xe4/0x130 [<804dcb00>] bus_for_each_drv+0xb4/0xd8 [<804dfac4>] __device_attach+0x104/0x1a4 [<804ddd24>] bus_probe_device+0x48/0xc4 [<804deb44>] deferred_probe_work_func+0xf0/0x10c [<800a0ffc>] process_one_work+0x314/0x4d4 [<800a17fc>] worker_thread+0x2a4/0x354 [<800a9a54>] kthread+0x134/0x13c [<8006306c>] ret_from_kernel_thread+0x14/0x1c Same Issue would affect some other PHYs (QCA8081, QCA9561), so fix it too. Fixes: 3265f4218878 ("net: phy: at803x: add fiber support") Signed-off-by: Oleksij Rempel Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 6a467e7817a6a..59fe356942b51 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -2072,6 +2072,8 @@ static struct phy_driver at803x_driver[] = { /* ATHEROS AR9331 */ PHY_ID_MATCH_EXACT(ATH9331_PHY_ID), .name = "Qualcomm Atheros AR9331 built-in PHY", + .probe = at803x_probe, + .remove = at803x_remove, .suspend = at803x_suspend, .resume = at803x_resume, .flags = PHY_POLL_CABLE_TEST, @@ -2087,6 +2089,8 @@ static struct phy_driver at803x_driver[] = { /* Qualcomm Atheros QCA9561 */ PHY_ID_MATCH_EXACT(QCA9561_PHY_ID), .name = "Qualcomm Atheros QCA9561 built-in PHY", + .probe = at803x_probe, + .remove = at803x_remove, .suspend = at803x_suspend, .resume = at803x_resume, .flags = PHY_POLL_CABLE_TEST, @@ -2151,6 +2155,8 @@ static struct phy_driver at803x_driver[] = { PHY_ID_MATCH_EXACT(QCA8081_PHY_ID), .name = "Qualcomm QCA8081", .flags = PHY_POLL_CABLE_TEST, + .probe = at803x_probe, + .remove = at803x_remove, .config_intr = at803x_config_intr, .handle_interrupt = at803x_handle_interrupt, .get_tunable = at803x_get_tunable,