From: Johan Hovold Date: Fri, 28 Mar 2025 08:41:54 +0000 (+0100) Subject: arm64: dts: qcom: x1e80100-hp-x14: drop bogus USB retimer X-Git-Tag: v6.16-rc1~97^2~3^2~37 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=9c6ee9a760c52207eae64cb6b20cd1d93c3761ff;p=thirdparty%2Fkernel%2Flinux.git arm64: dts: qcom: x1e80100-hp-x14: drop bogus USB retimer Jens reported that the sanity checks added to the new ps883x USB retimer driver breaks USB and display on the HP X14. Turns out the X14 only has a retimer on one of the ports, but this initially went unnoticed due to the missing sanity check (and error handling) in the retimer driver. Drop the non-existing retimer from the devicetree to enable the second USB port and the display subsystem. Note that this also matches the ACPI tables. Fixes: 6f18b8d4142c ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14") Cc: Jens Glathe Signed-off-by: Johan Hovold Tested-by: Jens Glathe Tested-by: Juerg Haefliger Reviewed-by: Konrad Dybcio Reviewed-by: Abel Vesa Link: https://lore.kernel.org/r/20250328084154.16759-1-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson --- diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts index 9562b7e1603ee..10b3af5e79fb6 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts @@ -150,15 +150,7 @@ reg = <1>; pmic_glink_ss1_ss_in: endpoint { - remote-endpoint = <&retimer_ss1_ss_out>; - }; - }; - - port@2 { - reg = <2>; - - pmic_glink_ss1_con_sbu_in: endpoint { - remote-endpoint = <&retimer_ss1_con_sbu_out>; + remote-endpoint = <&usb_1_ss1_qmpphy_out>; }; }; }; @@ -370,54 +362,6 @@ regulator-boot-on; }; - vreg_rtmr1_1p15: regulator-rtmr1-1p15 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_RTMR1_1P15"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - - gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&usb1_pwr_1p15_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - vreg_rtmr1_1p8: regulator-rtmr1-1p8 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_RTMR1_1P8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&usb1_pwr_1p8_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - vreg_rtmr1_3p3: regulator-rtmr1-3p3 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_RTMR1_3P3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&usb1_pwr_3p3_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - vreg_vph_pwr: regulator-vph-pwr { compatible = "regulator-fixed"; @@ -1027,64 +971,6 @@ }; }; -&i2c7 { - clock-frequency = <400000>; - - status = "okay"; - - typec-mux@8 { - compatible = "parade,ps8830"; - reg = <0x8>; - - clocks = <&rpmhcc RPMH_RF_CLK4>; - - vdd-supply = <&vreg_rtmr1_1p15>; - vdd33-supply = <&vreg_rtmr1_3p3>; - vdd33-cap-supply = <&vreg_rtmr1_3p3>; - vddar-supply = <&vreg_rtmr1_1p15>; - vddat-supply = <&vreg_rtmr1_1p15>; - vddio-supply = <&vreg_rtmr1_1p8>; - - reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>; - - pinctrl-0 = <&rtmr1_default>; - pinctrl-names = "default"; - - orientation-switch; - retimer-switch; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - retimer_ss1_ss_out: endpoint { - remote-endpoint = <&pmic_glink_ss1_ss_in>; - }; - }; - - port@1 { - reg = <1>; - - retimer_ss1_ss_in: endpoint { - remote-endpoint = <&usb_1_ss1_qmpphy_out>; - }; - }; - - port@2 { - reg = <2>; - - retimer_ss1_con_sbu_out: endpoint { - remote-endpoint = <&pmic_glink_ss1_con_sbu_in>; - }; - }; - - }; - }; -}; - &i2c8 { clock-frequency = <400000>; @@ -1512,13 +1398,6 @@ }; }; - rtmr1_default: rtmr1-reset-n-active-state { - pins = "gpio176"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - tpad_default: tpad-default-state { pins = "gpio3"; function = "gpio"; @@ -1540,27 +1419,6 @@ }; }; - usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state { - pins = "gpio188"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state { - pins = "gpio175"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state { - pins = "gpio186"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - wcd_default: wcd-reset-n-active-state { pins = "gpio191"; function = "gpio"; @@ -1663,7 +1521,7 @@ }; &usb_1_ss1_qmpphy_out { - remote-endpoint = <&retimer_ss1_ss_in>; + remote-endpoint = <&pmic_glink_ss1_ss_in>; }; &usb_mp {