From: Philipp Zabel <p.zabel@pengutronix.de>
Date: Fri, 20 Dec 2013 15:25:17 +0000 (+0100)
Subject: ARM: dts: imx6q-sabrelite: PHY reset is active-low
X-Git-Tag: v3.15-rc1~77^2~40^2~17
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=a58a12ae00ac64ab01fa0931309f66b5bd056fe2;p=thirdparty%2Fkernel%2Flinux.git

ARM: dts: imx6q-sabrelite: PHY reset is active-low

Note that the fec driver code currently hard-codes an active-low
reset, regardless of the flags in the device tree.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---

diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 7b3fcc28c7e02..1c89dbf2337a0 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -151,7 +151,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio3 23 0>;
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
 	txen-skew-ps = <0>;
 	txc-skew-ps = <3000>;
 	rxdv-skew-ps = <0>;