From: Kishon Vijay Abraham I Date: Mon, 1 Feb 2021 19:58:04 +0000 (+0530) Subject: PCI: cadence: Configure LM_EP_FUNC_CFG based on epc->function_num_map X-Git-Tag: v5.12-rc1~37^2~6^2~5 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=a62074a9ba856082a60ff60693abd79f4b55177d;p=thirdparty%2Fkernel%2Flinux.git PCI: cadence: Configure LM_EP_FUNC_CFG based on epc->function_num_map The number of functions supported by the endpoint controller is configured in LM_EP_FUNC_CFG based on func_no member of struct pci_epf. Now that an endpoint function can be associated with two endpoint controllers (primary and secondary), just using func_no will not suffice as that will take into account only if the endpoint controller is associated with the primary interface of endpoint function. Instead use epc->function_num_map which will already have the configured functions information (irrespective of whether the endpoint controller is associated with primary or secondary interface). Link: https://lore.kernel.org/r/20210201195809.7342-13-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Tom Joseph --- diff --git a/drivers/pci/controller/cadence/pcie-cadence-ep.c b/drivers/pci/controller/cadence/pcie-cadence-ep.c index dc88078194cbe..897cdde02bd80 100644 --- a/drivers/pci/controller/cadence/pcie-cadence-ep.c +++ b/drivers/pci/controller/cadence/pcie-cadence-ep.c @@ -506,18 +506,13 @@ static int cdns_pcie_ep_start(struct pci_epc *epc) struct cdns_pcie_ep *ep = epc_get_drvdata(epc); struct cdns_pcie *pcie = &ep->pcie; struct device *dev = pcie->dev; - struct pci_epf *epf; - u32 cfg; int ret; /* * BIT(0) is hardwired to 1, hence function 0 is always enabled * and can't be disabled anyway. */ - cfg = BIT(0); - list_for_each_entry(epf, &epc->pci_epf, list) - cfg |= BIT(epf->func_no); - cdns_pcie_writel(pcie, CDNS_PCIE_LM_EP_FUNC_CFG, cfg); + cdns_pcie_writel(pcie, CDNS_PCIE_LM_EP_FUNC_CFG, epc->function_num_map); ret = cdns_pcie_start_link(pcie); if (ret) {