From: Stefan Eichenberger Date: Fri, 21 Jun 2024 15:37:49 +0000 (+0200) Subject: serial: imx: set receiver level before starting uart X-Git-Tag: v6.10-rc6~6^2~12 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=a81dbd0463eca317eee44985a66aa6cc2ce5c101;p=thirdparty%2Flinux.git serial: imx: set receiver level before starting uart Set the receiver level to something > 0 before calling imx_uart_start_rx in rs485_config. This is necessary to avoid an interrupt storm that might prevent the system from booting. This was seen on an i.MX7 device when the rs485-rts-active-low property was active in the device tree. Fixes: 6d215f83e5fc ("serial: imx: warn user when using unsupported configuration") Cc: stable Signed-off-by: Stefan Eichenberger Link: https://lore.kernel.org/r/20240621153829.183780-1-eichest@gmail.com Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 2eb22594960f3..f4f40c9373c2f 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1952,8 +1952,10 @@ static int imx_uart_rs485_config(struct uart_port *port, struct ktermios *termio /* Make sure Rx is enabled in case Tx is active with Rx disabled */ if (!(rs485conf->flags & SER_RS485_ENABLED) || - rs485conf->flags & SER_RS485_RX_DURING_TX) + rs485conf->flags & SER_RS485_RX_DURING_TX) { + imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT); imx_uart_start_rx(port); + } return 0; }