From: Ilpo Järvinen Date: Mon, 6 Jun 2022 10:04:18 +0000 (+0300) Subject: serial: stm32: Fill in rs485_supported X-Git-Tag: v6.0-rc1~64^2~110 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=aeae8f222fdd34bdddc1050dc073e56b2242c9b5;p=thirdparty%2Fkernel%2Flinux.git serial: stm32: Fill in rs485_supported Add information on supported serial_rs485 features. Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220606100433.13793-22-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index b7b44f4050d49..db3dd9731ee1e 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -1375,6 +1375,13 @@ static void stm32_usart_deinit_port(struct stm32_port *stm32port) clk_disable_unprepare(stm32port->clk); } +static const struct serial_rs485 stm32_rs485_supported = { + .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND | + SER_RS485_RX_DURING_TX, + .delay_rts_before_send = 1, + .delay_rts_after_send = 1, +}; + static int stm32_usart_init_port(struct stm32_port *stm32port, struct platform_device *pdev) { @@ -1394,6 +1401,7 @@ static int stm32_usart_init_port(struct stm32_port *stm32port, port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_STM32_CONSOLE); port->irq = irq; port->rs485_config = stm32_usart_config_rs485; + port->rs485_supported = &stm32_rs485_supported; ret = stm32_usart_init_rs485(port, pdev); if (ret)