From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Wed, 21 Feb 2024 12:20:57 +0000 (+0100)
Subject: 5.15-stable patches
X-Git-Tag: v4.19.307~13
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=af96b2680789455f6fdbbf0df03bf3d5c80b5aa7;p=thirdparty%2Fkernel%2Fstable-queue.git

5.15-stable patches

added patches:
	usb-dwc3-gadget-ignore-end-transfer-delay-on-teardown.patch
---

diff --git a/queue-5.15/series b/queue-5.15/series
index 14feb064e52..c28849e9ec0 100644
--- a/queue-5.15/series
+++ b/queue-5.15/series
@@ -474,3 +474,4 @@ staging-fbtft-core-set-smem_len-before-fb_deferred_io_init-call.patch
 usb-dwc3-gadget-don-t-delay-end-transfer-on-delayed_status.patch
 usb-dwc3-gadget-execute-gadget-stop-after-halting-the-controller.patch
 media-revert-media-rkisp1-drop-irqf_shared.patch
+usb-dwc3-gadget-ignore-end-transfer-delay-on-teardown.patch
diff --git a/queue-5.15/usb-dwc3-gadget-ignore-end-transfer-delay-on-teardown.patch b/queue-5.15/usb-dwc3-gadget-ignore-end-transfer-delay-on-teardown.patch
new file mode 100644
index 00000000000..69dafc6b521
--- /dev/null
+++ b/queue-5.15/usb-dwc3-gadget-ignore-end-transfer-delay-on-teardown.patch
@@ -0,0 +1,56 @@
+From c4e3ef5685393c5051b52cf1e94b8891d49793ab Mon Sep 17 00:00:00 2001
+From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+Date: Thu, 8 Dec 2022 16:50:35 -0800
+Subject: usb: dwc3: gadget: Ignore End Transfer delay on teardown
+
+From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+
+commit c4e3ef5685393c5051b52cf1e94b8891d49793ab upstream.
+
+If we delay sending End Transfer for Setup TRB to be prepared, we need
+to check if the End Transfer was in preparation for a driver
+teardown/soft-disconnect. In those cases, just send the End Transfer
+command without delay.
+
+In the case of soft-disconnect, there's a very small chance the command
+may not go through immediately. But should it happen, the Setup TRB will
+be prepared during the polling of the controller halted state, allowing
+the command to go through then.
+
+In the case of disabling endpoint due to reconfiguration (e.g.
+set_interface(alt-setting) or usb reset), then it's driven by the host.
+Typically the host wouldn't immediately cancel the control request and
+send another control transfer to trigger the End Transfer command
+timeout.
+
+Fixes: 4db0fbb60136 ("usb: dwc3: gadget: Don't delay End Transfer on delayed_status")
+Cc: stable@vger.kernel.org
+Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+Link: https://lore.kernel.org/r/f1617a323e190b9cc408fb8b65456e32b5814113.1670546756.git.Thinh.Nguyen@synopsys.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/dwc3/gadget.c |    5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/drivers/usb/dwc3/gadget.c
++++ b/drivers/usb/dwc3/gadget.c
+@@ -1701,6 +1701,7 @@ static int __dwc3_stop_active_transfer(s
+ 		dep->flags |= DWC3_EP_END_TRANSFER_PENDING;
+ 	}
+ 
++	dep->flags &= ~DWC3_EP_DELAY_STOP;
+ 	return ret;
+ }
+ 
+@@ -3710,8 +3711,10 @@ void dwc3_stop_active_transfer(struct dw
+ 	if (dep->number <= 1 && dwc->ep0state != EP0_DATA_PHASE)
+ 		return;
+ 
++	if (interrupt && (dep->flags & DWC3_EP_DELAY_STOP))
++		return;
++
+ 	if (!(dep->flags & DWC3_EP_TRANSFER_STARTED) ||
+-	    (dep->flags & DWC3_EP_DELAY_STOP) ||
+ 	    (dep->flags & DWC3_EP_END_TRANSFER_PENDING))
+ 		return;
+