From: Potin Lai <potin.lai.pt@gmail.com>
Date: Thu, 21 Nov 2024 04:34:05 +0000 (+0800)
Subject: ARM: dts: aspeed: catalina: remove interrupt of GPIOB4 form all IOEXP
X-Git-Tag: v6.14-rc1~103^2^2~6
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=b3092f4a8ebc2428e97a42826545fbbec39940ca;p=thirdparty%2Fkernel%2Flinux.git

ARM: dts: aspeed: catalina: remove interrupt of GPIOB4 form all IOEXP

We notice this interrupt pin always keep low, it cause BMC stuck at boot
up until kernel disabling IRQ of this GPIO pin.

Remove the interrupt of GPIOB4 pin from all IOEXP for now to avoid BMC
get stuck.

Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Link: https://patch.msgid.link/20241121-catalina-dts-20241120-v1-2-e4212502624b@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
---

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index dc17e1c8919b5..c151984289bc6 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -533,8 +533,6 @@
 		reg = <0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	// Module 1 IOEXP
@@ -543,8 +541,6 @@
 		reg = <0x21>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	// HMC IOEXP
@@ -553,8 +549,6 @@
 		reg = <0x27>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	// Module 0 EEPROM