From: Manorit Chawdhry <m-chawdhry@ti.com>
Date: Thu, 24 Oct 2024 05:21:03 +0000 (+0530)
Subject: arm64: dts: ti: k3-j7200: Add bootph-* properties
X-Git-Tag: v6.13-rc1~140^2~16^2~32
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=b903ab269e67ce5788b0b2a39db4bd11fd19359b;p=thirdparty%2Fkernel%2Flinux.git

arm64: dts: ti: k3-j7200: Add bootph-* properties

Adds bootph-* properties to the leaf nodes to enable bootloaders to
utilise them.

Following adds bootph-* to
- System controller nodes that allow controlling power domain, clocks, etc.
- secure_proxy_sa3/secure_proxy_main mboxes for communication with
  System Controller
- mcu_ringacc/mcu_udmap for DMA to SMS
- chipid for detection soc information.
- mcu_timer0 for bootloader tick-timer.
- hbmc_mux for enabling Hyperflash support
- ESM nodes for enabling ESM support.
- wkup_vtm for enabling Adaptive voltage scaling(AVS) support

Reviewed-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-6-2af90e3a4fe7@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 9386bf3ef9f68..ac9c0a9394615 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -136,6 +136,7 @@
 			      <0x00 0x32800000 0x00 0x100000>;
 			interrupt-names = "rx_011";
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			bootph-all;
 		};
 
 		hwspinlock: spinlock@30e00000 {
@@ -1527,6 +1528,7 @@
 	main_esm: esm@700000 {
 		compatible = "ti,j721e-esm";
 		reg = <0x0 0x700000 0x0 0x1000>;
+		bootph-pre-ram;
 		ti,esm-pins = <656>, <657>;
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 5097d192c2b20..7e9ad23019377 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -21,16 +21,19 @@
 		k3_pds: power-controller {
 			compatible = "ti,sci-pm-domain";
 			#power-domain-cells = <2>;
+			bootph-all;
 		};
 
 		k3_clks: clock-controller {
 			compatible = "ti,k2g-sci-clk";
 			#clock-cells = <2>;
+			bootph-all;
 		};
 
 		k3_reset: reset-controller {
 			compatible = "ti,sci-reset";
 			#reset-cells = <2>;
+			bootph-all;
 		};
 	};
 
@@ -44,6 +47,7 @@
 		assigned-clocks = <&k3_clks 35 1>;
 		assigned-clock-parents = <&k3_clks 35 2>;
 		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		bootph-pre-ram;
 		ti,timer-pwm;
 	};
 
@@ -191,6 +195,7 @@
 		chipid: chipid@14 {
 			compatible = "ti,am654-chipid";
 			reg = <0x14 0x4>;
+			bootph-all;
 		};
 	};
 
@@ -344,6 +349,7 @@
 			      <0x00 0x28440000 0x00 0x40000>;
 			reg-names = "rt", "fifos", "proxy_gcfg",
 				    "proxy_target", "cfg";
+			bootph-all;
 			ti,num-rings = <286>;
 			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
 			ti,sci = <&dmsc>;
@@ -363,6 +369,7 @@
 				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
+			bootph-all;
 
 			ti,sci = <&dmsc>;
 			ti,sci-dev-id = <236>;
@@ -383,6 +390,8 @@
 		reg = <0x0 0x2a480000 0x0 0x80000>,
 		      <0x0 0x2a380000 0x0 0x80000>,
 		      <0x0 0x2a400000 0x0 0x80000>;
+		bootph-pre-ram;
+
 		/*
 		 * Marked Disabled:
 		 * Node is incomplete as it is meant for bootloaders and
@@ -534,6 +543,7 @@
 			reg = <0x00 0x47000004 0x00 0x4>;
 			#mux-control-cells = <1>;
 			mux-reg-masks = <0x0 0x2>; /* HBMC select */
+			bootph-all;
 		};
 
 		hbmc: hyperbus@47034000 {
@@ -652,6 +662,7 @@
 		      <0x00 0x42050000 0x00 0x350>;
 		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
 		#thermal-sensor-cells = <1>;
+		bootph-pre-ram;
 	};
 
 	mcu_esm: esm@40800000 {