From: Hari Nagalla Date: Thu, 3 Oct 2024 17:01:14 +0000 (-0500) Subject: arm64: dts: ti: k3-am62: Add M4F remoteproc node X-Git-Tag: v6.13-rc1~140^2~16^2~53 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=be4bac3bcb281b264bd35ae1ff7bbbb99e3e00fe;p=thirdparty%2Fkernel%2Flinux.git arm64: dts: ti: k3-am62: Add M4F remoteproc node The AM62x SoCs of the TI K3 family have a Cortex M4F core in the MCU domain. This core can be used by non safety applications as a remote processor. When used as a remote processor with virtio/rpmessage IPC, two carveout reserved memory nodes are needed. Disable by default as this node is not complete until mailbox data is provided in the board level DT. Signed-off-by: Hari Nagalla Signed-off-by: Andrew Davis Tested-by: Wadim Egorov Link: https://lore.kernel.org/r/20241003170118.24932-2-afd@ti.com Signed-off-by: Vignesh Raghavendra --- diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi index bb43a411f59b2..68e906796aefe 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi @@ -174,4 +174,17 @@ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; status = "disabled"; }; + + mcu_m4fss: m4fss@5000000 { + compatible = "ti,am64-m4fss"; + reg = <0x00 0x5000000 0x00 0x30000>, + <0x00 0x5040000 0x00 0x10000>; + reg-names = "iram", "dram"; + resets = <&k3_reset 9 1>; + firmware-name = "am62-mcu-m4f0_0-fw"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <9>; + ti,sci-proc-ids = <0x18 0xff>; + status = "disabled"; + }; };