From: Coia Prant <coiaprant@gmail.com>
Date: Fri, 7 Nov 2025 13:38:38 +0000 (+0800)
Subject: arm64: dts: rockchip: clean up devicetree for 9Tripod X3568 v4
X-Git-Tag: v6.19-rc1~100^2~12^2~7
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=c1ffe499306b26a61f390b7d83c5703aa8e2af55;p=thirdparty%2Flinux.git

arm64: dts: rockchip: clean up devicetree for 9Tripod X3568 v4

Fix indentation, remove unused SDIO properties, and drop the GMAC clock
that was used for input direction. The board uses the clock as
output, so the input clock is not needed.

Signed-off-by: Coia Prant <coiaprant@gmail.com>
Link: https://patch.msgid.link/20251107133839.300252-1-coiaprant@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-9tripod-x3568-v4.dts b/arch/arm64/boot/dts/rockchip/rk3568-9tripod-x3568-v4.dts
index 443ed7d4b596f..ad4d620603c63 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-9tripod-x3568-v4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-9tripod-x3568-v4.dts
@@ -273,11 +273,10 @@
 	clock_in_out = "output";
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac0_miim
-			&gmac0_tx_bus2
-			&gmac0_rx_bus2
-			&gmac0_rgmii_clk
-			&gmac0_rgmii_bus
-			&gmac0_clkinout>;
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
 	phy-handle = <&rgmii_phy0>;
 	phy-mode = "rgmii-id";
 	status = "okay";
@@ -290,11 +289,10 @@
 	clock_in_out = "output";
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac1m1_miim
-			&gmac1m1_tx_bus2
-			&gmac1m1_rx_bus2
-			&gmac1m1_rgmii_clk
-			&gmac1m1_rgmii_bus
-			&gmac1m1_clkinout>;
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus>;
 	phy-handle = <&rgmii_phy1>;
 	phy-mode = "rgmii-id";
 	status = "okay";
@@ -674,8 +672,7 @@
 
 	pmic {
 		pmic_int: pmic_int {
-			rockchip,pins =
-				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
@@ -763,7 +760,6 @@
 /* used for AP6275S WiFi */
 &sdmmc2 {
 	bus-width = <4>;
-	disable-wp;
 	cap-sd-highspeed;
 	cap-sdio-irq;
 	keep-power-in-suspend;
@@ -771,9 +767,6 @@
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
 	sd-uhs-sdr104;
 	vmmc-supply = <&vcc3v3_sys>;
 	vqmmc-supply = <&vcc_1v8>;