From: Wei Deng Date: Mon, 2 Mar 2026 02:46:58 +0000 (+0530) Subject: arm64: dts: qcom: qcs8300-ride: Enable Bluetooth support X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=ca4d6e4b83fe5f89cfcca0589769e22daec70720;p=thirdparty%2Fkernel%2Flinux.git arm64: dts: qcom: qcs8300-ride: Enable Bluetooth support Enable BT on qcs8300-ride by adding a BT device tree node. Since the platform uses the QCA6698 Bluetooth chip. While the QCA6698 shares the same IP core as the WCN6855, it has different RF components and RAM sizes, requiring new firmware files. Use the firmware-name property to specify the NVM and rampatch firmware to load. Reviewed-by: Konrad Dybcio Signed-off-by: Wei Deng Reviewed-by: Bartosz Golaszewski Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20260302024658.2836798-1-wei.deng@oss.qualcomm.com Signed-off-by: Bjorn Andersson --- diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts index f351623a88f7..e9a8553a8d82 100644 --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts @@ -18,6 +18,7 @@ aliases { serial0 = &uart7; mmc0 = &sdhc_1; + serial1 = &uart2; }; chosen { @@ -183,6 +184,7 @@ vddpcie1p3-supply = <&vreg_conn_1p35>; vddpcie1p9-supply = <&vreg_conn_1p95>; + bt-enable-gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>; wlan-enable-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; regulators { @@ -725,6 +727,12 @@ }; &tlmm { + bt_en_state: bt-en-state { + pins = "gpio55"; + function = "gpio"; + bias-pull-down; + }; + pcie0_default_state: pcie0-default-state { wake-pins { pins = "gpio0"; @@ -814,6 +822,25 @@ }; }; +&uart2 { + status = "okay"; + + bluetooth: bluetooth { + compatible = "qcom,wcn6855-bt"; + firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv"; + max-speed = <3200000>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + }; +}; + &uart7 { status = "okay"; };