From: Andrew Lunn Date: Sun, 2 Sep 2018 16:29:11 +0000 (+0200) Subject: ARM: dts: vf610-zii-cfu1: Add SFF interface to switch X-Git-Tag: v4.20-rc1~66^2~18^2~25 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=d482cc61e38fe6ce66ea585d300107f925a039b4;p=thirdparty%2Flinux.git ARM: dts: vf610-zii-cfu1: Add SFF interface to switch The switch has an SFF attached to port 5. Add the SFF device, the pinmux for its GPIOs, and list the port in the switch configuration. Signed-off-by: Andrew Lunn Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts index 37777cf22e67b..de3ed03ec0e7e 100644 --- a/arch/arm/boot/dts/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -66,6 +66,15 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + sff: sfp { + compatible = "sff,sff"; + pinctrl-0 = <&pinctrl_optical>; + pinctrl-names = "default"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>; + tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + }; }; &adc0 { @@ -170,6 +179,14 @@ label = "eth_cu_1000_3"; }; + port@5 { + reg = <5>; + label = "eth_fc_1000_1"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sff>; + }; + port@6 { reg = <6>; label = "cpu"; @@ -289,6 +306,16 @@ >; }; + pinctrl_optical: optical-grp { + fsl,pins = < + /* SFF SD input */ + VF610_PAD_PTE27__GPIO_132 0x3061 + + /* SFF Transmit disable output */ + VF610_PAD_PTE13__GPIO_118 0x3043 + >; + }; + pinctrl_switch: switch-grp { fsl,pins = < VF610_PAD_PTB28__GPIO_98 0x3061