From: Geert Uytterhoeven Date: Thu, 24 Oct 2019 13:14:23 +0000 (-0300) Subject: media: dt-bindings: rcar_vin: Document RZ/G1 per-board settings X-Git-Tag: v5.5-rc1~143^2^2~72 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=d619a95693acbab64e0cdc76ddee5e214c4363f3;p=thirdparty%2Fkernel%2Flinux.git media: dt-bindings: rcar_vin: Document RZ/G1 per-board settings The R-Car Gen2 per-board settings apply to RZ/G1, too. Fixes: 1d14a5eaa156b0b3 ("media: dt-bindings: media: rcar_vin: add device tree support for r8a774[35]") Signed-off-by: Geert Uytterhoeven Reviewed-by: Niklas Söderlund Acked-by: Rob Herring Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- diff --git a/Documentation/devicetree/bindings/media/renesas,vin.txt b/Documentation/devicetree/bindings/media/renesas,vin.txt index 103faadd5d4ea..e30b0d4eefdd8 100644 --- a/Documentation/devicetree/bindings/media/renesas,vin.txt +++ b/Documentation/devicetree/bindings/media/renesas,vin.txt @@ -44,7 +44,7 @@ on Gen3 and RZ/G2 platforms to a CSI-2 receiver. Additionally, an alias named vinX will need to be created to specify which video input device this is. -The per-board settings Gen2 platforms: +The per-board settings for Gen2 and RZ/G1 platforms: - port - sub-node describing a single endpoint connected to the VIN from external SoC pins as described in video-interfaces.txt[1]. @@ -64,7 +64,7 @@ The per-board settings Gen2 platforms: - data-enable-active: polarity of CLKENB signal, see [1] for description. Default is active high. -The per-board settings Gen3 and RZ/G2 platforms: +The per-board settings for Gen3 and RZ/G2 platforms: Gen3 and RZ/G2 platforms can support both a single connected parallel input source from external SoC pins (port@0) and/or multiple parallel input sources