From: Linus Walleij Date: Wed, 19 Feb 2025 21:04:34 +0000 (+0100) Subject: gpio: vf610: Switch to gpio-mmio X-Git-Tag: v6.15-rc1~179^2~75 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=da5dd31efd2465ccc9a70a85bdc325e394256689;p=thirdparty%2Flinux.git gpio: vf610: Switch to gpio-mmio After adding a pinctrl flag to gpio-mmio we can use it for driving gpio-vf610. The existing code has the same semantics and the generic gpio-mmio, including reading from the data out register when the direction is set to input, and it can also handle the absence of the direction register better than the current driver: we get the direction from the shadow direction registers in gpio-mmio instead. Since gpio-mmio has an internal spinlock we can drop the direction-protecting spinlock from the driver. Signed-off-by: Linus Walleij Reviewed-by: Haibo Chen Tested-by: Haibo Chen Link: https://lore.kernel.org/r/20250219-vf610-mmio-v3-2-588b64f0b689@linaro.org Signed-off-by: Bartosz Golaszewski --- diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 06cc9b826483d..3e9b174fee841 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -757,6 +757,7 @@ config GPIO_VF610 default y if SOC_VF610 depends on ARCH_MXC || COMPILE_TEST select GPIOLIB_IRQCHIP + select GPIO_GENERIC help Say yes here to support i.MX or Vybrid vf610 GPIOs. diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c index c36a9dbccd4dd..4dad7ce0c4dc6 100644 --- a/drivers/gpio/gpio-vf610.c +++ b/drivers/gpio/gpio-vf610.c @@ -36,7 +36,6 @@ struct vf610_gpio_port { struct clk *clk_port; struct clk *clk_gpio; int irq; - spinlock_t lock; /* protect gpio direction registers */ }; #define GPIO_PDOR 0x00 @@ -94,78 +93,6 @@ static inline u32 vf610_gpio_readl(void __iomem *reg) return readl_relaxed(reg); } -static int vf610_gpio_get(struct gpio_chip *gc, unsigned int gpio) -{ - struct vf610_gpio_port *port = gpiochip_get_data(gc); - u32 mask = BIT(gpio); - unsigned long offset = GPIO_PDIR; - - if (port->sdata->have_paddr) { - mask &= vf610_gpio_readl(port->gpio_base + GPIO_PDDR); - if (mask) - offset = GPIO_PDOR; - } - - return !!(vf610_gpio_readl(port->gpio_base + offset) & BIT(gpio)); -} - -static void vf610_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) -{ - struct vf610_gpio_port *port = gpiochip_get_data(gc); - u32 mask = BIT(gpio); - unsigned long offset = val ? GPIO_PSOR : GPIO_PCOR; - - vf610_gpio_writel(mask, port->gpio_base + offset); -} - -static int vf610_gpio_direction_input(struct gpio_chip *chip, unsigned int gpio) -{ - struct vf610_gpio_port *port = gpiochip_get_data(chip); - u32 mask = BIT(gpio); - u32 val; - - if (port->sdata->have_paddr) { - guard(spinlock_irqsave)(&port->lock); - val = vf610_gpio_readl(port->gpio_base + GPIO_PDDR); - val &= ~mask; - vf610_gpio_writel(val, port->gpio_base + GPIO_PDDR); - } - - return pinctrl_gpio_direction_input(chip, gpio); -} - -static int vf610_gpio_direction_output(struct gpio_chip *chip, unsigned int gpio, - int value) -{ - struct vf610_gpio_port *port = gpiochip_get_data(chip); - u32 mask = BIT(gpio); - u32 val; - - vf610_gpio_set(chip, gpio, value); - - if (port->sdata->have_paddr) { - guard(spinlock_irqsave)(&port->lock); - val = vf610_gpio_readl(port->gpio_base + GPIO_PDDR); - val |= mask; - vf610_gpio_writel(val, port->gpio_base + GPIO_PDDR); - } - - return pinctrl_gpio_direction_output(chip, gpio); -} - -static int vf610_gpio_get_direction(struct gpio_chip *gc, unsigned int gpio) -{ - struct vf610_gpio_port *port = gpiochip_get_data(gc); - u32 mask = BIT(gpio); - - mask &= vf610_gpio_readl(port->gpio_base + GPIO_PDDR); - - if (mask) - return GPIO_LINE_DIRECTION_OUT; - - return GPIO_LINE_DIRECTION_IN; -} - static void vf610_gpio_irq_handler(struct irq_desc *desc) { struct vf610_gpio_port *port = @@ -291,6 +218,7 @@ static int vf610_gpio_probe(struct platform_device *pdev) struct vf610_gpio_port *port; struct gpio_chip *gc; struct gpio_irq_chip *girq; + unsigned long flags; int i; int ret; bool dual_base; @@ -300,7 +228,6 @@ static int vf610_gpio_probe(struct platform_device *pdev) return -ENOMEM; port->sdata = device_get_match_data(dev); - spin_lock_init(&port->lock); dual_base = port->sdata->have_dual_base; @@ -367,23 +294,25 @@ static int vf610_gpio_probe(struct platform_device *pdev) } gc = &port->gc; - gc->parent = dev; - gc->label = dev_name(dev); - gc->ngpio = VF610_GPIO_PER_PORT; - gc->base = -1; - - gc->request = gpiochip_generic_request; - gc->free = gpiochip_generic_free; - gc->direction_input = vf610_gpio_direction_input; - gc->get = vf610_gpio_get; - gc->direction_output = vf610_gpio_direction_output; - gc->set = vf610_gpio_set; + flags = BGPIOF_PINCTRL_BACKEND; /* - * only IP has Port Data Direction Register(PDDR) can - * support get direction + * We only read the output register for current value on output + * lines if the direction register is available so we can switch + * direction. */ if (port->sdata->have_paddr) - gc->get_direction = vf610_gpio_get_direction; + flags |= BGPIOF_READ_OUTPUT_REG_SET; + ret = bgpio_init(gc, dev, 4, + port->gpio_base + GPIO_PDIR, + port->gpio_base + GPIO_PDOR, + NULL, + port->sdata->have_paddr ? port->gpio_base + GPIO_PDDR : NULL, + NULL, + flags); + if (ret) + return dev_err_probe(dev, ret, "unable to init generic GPIO\n"); + gc->label = dev_name(dev); + gc->base = -1; /* Mask all GPIO interrupts */ for (i = 0; i < gc->ngpio; i++)