From: Richard Zhu <hongxing.zhu@nxp.com>
Date: Wed, 20 May 2026 07:22:28 +0000 (+0800)
Subject: arm64: dts: imx95: Correct PCIe outbound address space configuration
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=dbecf38e60d4ef08c59836b7bc16e8efca01fc47;p=thirdparty%2Flinux.git

arm64: dts: imx95: Correct PCIe outbound address space configuration

Fix the PCIe outbound memory ranges for both pcie0 and pcie1
controllers on i.MX95.

The memory window size was incorrectly set to 256MB during initial
bring-up, but the hardware supports up to 4GB of outbound address space
per controller.

Additionally, the ECAM region cannot be mapped as I/O space. Use a
memory-mapped region for I/O space instead, and relocate the 1MB I/O
region to immediately follow the memory region at offset 0xf0000000
within each window.

Update the outbound address space layout per controller as follows:

  - 3.5GB  64-bit prefetchable memory
  - 256MB  32-bit non-prefetchable memory
  - 1MB    I/O

Fixes: 3b1d5deb29ff ("arm64: dts: imx95: add pcie[0,1] and pcie-ep[0,1] support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
index b4ca507b650a..d6c549c16047 100644
--- a/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -1947,8 +1947,9 @@
 			      <0 0x4c360000 0 0x10000>,
 			      <0 0x4c340000 0 0x4000>;
 			reg-names = "dbi", "config", "atu", "app";
-			ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>,
-				 <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x10000000>;
+			ranges = <0x43000000 0x9 0x00000000 0x9 0x00000000 0x0 0xe0000000>,
+				 <0x82000000 0x0 0xe0000000 0x9 0xe0000000 0x0 0x10000000>,
+				 <0x81000000 0x0 0x00000000 0x9 0xf0000000 0x0 0x00100000>;
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -2033,8 +2034,9 @@
 			      <0 0x4c3e0000 0 0x10000>,
 			      <0 0x4c3c0000 0 0x4000>;
 			reg-names = "dbi", "config", "atu", "app";
-			ranges = <0x81000000 0 0x00000000 0x8 0x8ff00000 0 0x00100000>,
-				 <0x82000000 0 0x10000000 0xa 0x10000000 0 0x10000000>;
+			ranges = <0x43000000 0xa 0x00000000 0xa 0x00000000 0x0 0xe0000000>,
+				 <0x82000000 0x0 0xe0000000 0xa 0xe0000000 0x0 0x10000000>,
+				 <0x81000000 0x0 0x00000000 0xa 0xf0000000 0x0 0x00100000>;
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";