From: Wei Fang Date: Fri, 13 Jun 2025 09:36:05 +0000 (+0800) Subject: net: enetc: replace PCVLANR1/2 with SICVLANR1/2 and remove dead branch X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=dd4a5780f7d95989eaef3486162c1acb4d03d868;p=thirdparty%2Flinux.git net: enetc: replace PCVLANR1/2 with SICVLANR1/2 and remove dead branch Both PF and VF have rx-vlan-offload enabled, however, the PCVLANR1/2 registers are resources controlled by PF, so VF cannot access these two registers. Fortunately, the hardware provides SICVLANR1/2 registers for each SI to reflect the value of PCVLANR1/2 registers. Therefore, use SICVLANR1/2 instead of PCVLANR1/2. Note that this is not an issue in actual use, because the current driver does not support custom TPID, the driver will not access these two registers in actual use, so this modification is just an optimization. In addition, since ENETC_RXBD_FLAG_TPID is defined as GENMASK(1, 0), the possible values are only 0, 1, 2, 3, so the default branch will never be true, so remove the default branch. Signed-off-by: Wei Fang Link: https://patch.msgid.link/20250613093605.39277-1-wei.fang@nxp.com Signed-off-by: Paolo Abeni --- diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c index dcc3fbac3481f..e4287725832e0 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc.c +++ b/drivers/net/ethernet/freescale/enetc/enetc.c @@ -1375,6 +1375,7 @@ static void enetc_get_offloads(struct enetc_bdr *rx_ring, } if (le16_to_cpu(rxbd->r.flags) & ENETC_RXBD_FLAG_VLAN) { + struct enetc_hw *hw = &priv->si->hw; __be16 tpid = 0; switch (le16_to_cpu(rxbd->r.flags) & ENETC_RXBD_FLAG_TPID) { @@ -1385,15 +1386,12 @@ static void enetc_get_offloads(struct enetc_bdr *rx_ring, tpid = htons(ETH_P_8021AD); break; case 2: - tpid = htons(enetc_port_rd(&priv->si->hw, - ENETC_PCVLANR1)); + tpid = htons(enetc_rd_hot(hw, ENETC_SICVLANR1) & + SICVLANR_ETYPE); break; case 3: - tpid = htons(enetc_port_rd(&priv->si->hw, - ENETC_PCVLANR2)); - break; - default: - break; + tpid = htons(enetc_rd_hot(hw, ENETC_SICVLANR2) & + SICVLANR_ETYPE); } __vlan_hwaccel_put_tag(skb, tpid, le16_to_cpu(rxbd->r.vlan_opt)); diff --git a/drivers/net/ethernet/freescale/enetc/enetc_hw.h b/drivers/net/ethernet/freescale/enetc/enetc_hw.h index 4098f01479bc0..cb26f185f52fd 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h +++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h @@ -43,6 +43,9 @@ #define ENETC_SIPMAR0 0x80 #define ENETC_SIPMAR1 0x84 +#define ENETC_SICVLANR1 0x90 +#define ENETC_SICVLANR2 0x94 +#define SICVLANR_ETYPE GENMASK(15, 0) /* VF-PF Message passing */ #define ENETC_DEFAULT_MSG_SIZE 1024 /* and max size */