From: Guenter Roeck Date: Thu, 6 Jun 2024 16:36:38 +0000 (-0700) Subject: hwmon: (pmbus/mp2856) Let enum chips start with index 0 X-Git-Tag: v6.11-rc1~212^2~48 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=e229c6e80f9d3e92880de66962f7448d7d00e7df;p=thirdparty%2Fkernel%2Flinux.git hwmon: (pmbus/mp2856) Let enum chips start with index 0 Earlier it was assumed that the data pointer in of_device_id must not start with 0 (NULL) if i2c_get_match_data() is used. However, it turns out that this is perfectly fine as long as there is also an i2c_device_id array with the same data, which is used as fallback in that case. Let enum chips start with 0 to avoid confusion against other drivers where the enum starts with 0 and i2c_get_match_data() is used as well. While doing that, remove chip_id from struct mp2856_data since it is only used in the probe function, and typecast the result of i2c_get_match_data() to kernel_ulong_t to avoid the double typecast. Cc: Peter Yin Cc: Potin Lai Signed-off-by: Guenter Roeck --- diff --git a/drivers/hwmon/pmbus/mp2856.c b/drivers/hwmon/pmbus/mp2856.c index 6969350f5d7d4..41bb866670912 100644 --- a/drivers/hwmon/pmbus/mp2856.c +++ b/drivers/hwmon/pmbus/mp2856.c @@ -46,7 +46,7 @@ #define MP2856_PAGE_NUM 2 -enum chips { mp2856 = 1, mp2857 }; +enum chips { mp2856, mp2857 }; static const int mp2856_max_phases[][MP2856_PAGE_NUM] = { [mp2856] = { MP2856_MAX_PHASE_RAIL1, MP2856_MAX_PHASE_RAIL2 }, @@ -66,7 +66,6 @@ struct mp2856_data { int vout_format[MP2856_PAGE_NUM]; int curr_sense_gain[MP2856_PAGE_NUM]; int max_phases[MP2856_PAGE_NUM]; - enum chips chip_id; }; #define to_mp2856_data(x) container_of(x, struct mp2856_data, info) @@ -397,6 +396,7 @@ static int mp2856_probe(struct i2c_client *client) { struct pmbus_driver_info *info; struct mp2856_data *data; + enum chips chip_id; int ret; data = devm_kzalloc(&client->dev, sizeof(struct mp2856_data), @@ -404,9 +404,9 @@ static int mp2856_probe(struct i2c_client *client) if (!data) return -ENOMEM; - data->chip_id = (enum chips)(uintptr_t)i2c_get_match_data(client); + chip_id = (kernel_ulong_t)i2c_get_match_data(client); - memcpy(data->max_phases, mp2856_max_phases[data->chip_id], + memcpy(data->max_phases, mp2856_max_phases[chip_id], sizeof(data->max_phases)); memcpy(&data->info, &mp2856_info, sizeof(*info));