From: Geert Uytterhoeven Date: Fri, 29 Sep 2017 12:15:06 +0000 (+0200) Subject: pinctrl: sh-pfc: r8a7795: Use generic IOCTRL register description X-Git-Tag: v4.15-rc1~85^2~19^2~2 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=e2aad8464c0bf183be64c2120a37e87790dba367;p=thirdparty%2Flinux.git pinctrl: sh-pfc: r8a7795: Use generic IOCTRL register description Move R-Car H3 ES2.0 I/O voltage support over to the generic way to describe IOCTRL registers, which will be needed for suspend/resume support. Signed-off-by: Geert Uytterhoeven --- diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c index 0a16dea0dace6..d1cec6d12e818 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c @@ -5413,11 +5413,20 @@ static const struct pinmux_drive_reg pinmux_drive_regs[] = { { }, }; +enum ioctrl_regs { + POCCTRL, +}; + +static const struct pinmux_ioctrl_reg pinmux_ioctrl_regs[] = { + [POCCTRL] = { 0xe6060380, }, + { /* sentinel */ }, +}; + static int r8a7795_pin_to_pocctrl(struct sh_pfc *pfc, unsigned int pin, u32 *pocctrl) { int bit = -EINVAL; - *pocctrl = 0xe6060380; + *pocctrl = pinmux_ioctrl_regs[POCCTRL].reg; if (pin >= RCAR_GP_PIN(3, 0) && pin <= RCAR_GP_PIN(3, 11)) bit = pin & 0x1f; @@ -5748,6 +5757,7 @@ const struct sh_pfc_soc_info r8a7795_pinmux_info = { .cfg_regs = pinmux_config_regs, .drive_regs = pinmux_drive_regs, .bias_regs = pinmux_bias_regs, + .ioctrl_regs = pinmux_ioctrl_regs, .pinmux_data = pinmux_data, .pinmux_data_size = ARRAY_SIZE(pinmux_data),