From: Neil Armstrong Date: Tue, 17 Jan 2023 09:11:46 +0000 (+0100) Subject: ARM: meson: switch AXG & GX dwc2 otg to DM X-Git-Tag: v2023.04-rc2~28^2~4 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=e327e2affd302b7fd15b655624fdacb2f0492eab;p=thirdparty%2Fu-boot.git ARM: meson: switch AXG & GX dwc2 otg to DM With CONFIG_DM_USB_GADGET=y, we no longer need any board_usb_*() logic because: * the dwc2 driver is DM compatible, and handles its own clock enabling * the dwc3-meson-gxl glue drivers handles "force mode switching" Remove all mach-meson gx & axg usb code and enable CONFIG_DM_USB_GADGET. Note: Only configs having both CONFIG_USB_DWC3_MESON_GXL=y *and* USB_GADGET_DWC2_OTG=y have been updated. Thanks for the original work from Mattijs at [1] [1] https://lore.kernel.org/all/20221024-meson-dm-usb-v1-2-2ab077a503b9@baylibre.com/ Reviewed-by: Mattijs Korpershoek Link: https://lore.kernel.org/r/20230117-u-boot-usb-gxl-otg-dm-v1-2-2853f6d75b06@linaro.org Signed-off-by: Neil Armstrong --- diff --git a/arch/arm/mach-meson/board-axg.c b/arch/arm/mach-meson/board-axg.c index 236ec815799..fdf18752cdd 100644 --- a/arch/arm/mach-meson/board-axg.c +++ b/arch/arm/mach-meson/board-axg.c @@ -15,12 +15,6 @@ #include #include #include -#include -#include -#include -#include -#include -#include DECLARE_GLOBAL_DATA_PTR; @@ -90,126 +84,3 @@ static struct mm_region axg_mem_map[] = { }; struct mm_region *mem_map = axg_mem_map; - -#if CONFIG_IS_ENABLED(USB_DWC3_MESON_GXL) && \ - CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG) -static struct dwc2_plat_otg_data meson_gx_dwc2_data; - -int board_usb_init(int index, enum usb_init_type init) -{ - struct fdtdec_phandle_args args; - const void *blob = gd->fdt_blob; - int node, dwc2_node; - struct udevice *dev, *clk_dev; - struct clk clk; - int ret; - - /* find the usb glue node */ - node = fdt_node_offset_by_compatible(blob, -1, - "amlogic,meson-axg-usb-ctrl"); - if (node < 0) { - debug("Not found usb-control node\n"); - return -ENODEV; - } - - if (!fdtdec_get_is_enabled(blob, node)) { - debug("usb is disabled in the device tree\n"); - return -ENODEV; - } - - ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS, node, &dev); - if (ret) { - debug("Not found usb-control device\n"); - return ret; - } - - /* find the dwc2 node */ - dwc2_node = fdt_node_offset_by_compatible(blob, node, - "amlogic,meson-g12a-usb"); - if (dwc2_node < 0) { - debug("Not found dwc2 node\n"); - return -ENODEV; - } - - if (!fdtdec_get_is_enabled(blob, dwc2_node)) { - debug("dwc2 is disabled in the device tree\n"); - return -ENODEV; - } - - meson_gx_dwc2_data.regs_otg = fdtdec_get_addr(blob, dwc2_node, "reg"); - if (meson_gx_dwc2_data.regs_otg == FDT_ADDR_T_NONE) { - debug("usbotg: can't get base address\n"); - return -ENODATA; - } - - /* Enable clock */ - ret = fdtdec_parse_phandle_with_args(blob, dwc2_node, "clocks", - "#clock-cells", 0, 0, &args); - if (ret) { - debug("usbotg has no clocks defined in the device tree\n"); - return ret; - } - - ret = uclass_get_device_by_of_offset(UCLASS_CLK, args.node, &clk_dev); - if (ret) - return ret; - - if (args.args_count != 1) { - debug("Can't find clock ID in the device tree\n"); - return -ENODATA; - } - - clk.dev = clk_dev; - clk.id = args.args[0]; - - ret = clk_enable(&clk); - if (ret) { - debug("Failed to enable usbotg clock\n"); - return ret; - } - - meson_gx_dwc2_data.rx_fifo_sz = fdtdec_get_int(blob, dwc2_node, - "g-rx-fifo-size", 0); - meson_gx_dwc2_data.np_tx_fifo_sz = fdtdec_get_int(blob, dwc2_node, - "g-np-tx-fifo-size", 0); - meson_gx_dwc2_data.tx_fifo_sz = fdtdec_get_int(blob, dwc2_node, - "g-tx-fifo-size", 0); - - /* Switch to peripheral mode */ - ret = dwc3_meson_gxl_force_mode(dev, USB_DR_MODE_PERIPHERAL); - if (ret) - return ret; - - return dwc2_udc_probe(&meson_gx_dwc2_data); -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - const void *blob = gd->fdt_blob; - struct udevice *dev; - int node; - int ret; - - /* find the usb glue node */ - node = fdt_node_offset_by_compatible(blob, -1, - "amlogic,meson-axg-usb-ctrl"); - if (node < 0) { - debug("Not found usb-control node\n"); - return -ENODEV; - } - - if (!fdtdec_get_is_enabled(blob, node)) - return -ENODEV; - - ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS, node, &dev); - if (ret) - return ret; - - /* Switch to OTG mode */ - ret = dwc3_meson_gxl_force_mode(dev, USB_DR_MODE_HOST); - if (ret) - return ret; - - return 0; -} -#endif diff --git a/arch/arm/mach-meson/board-gx.c b/arch/arm/mach-meson/board-gx.c index 01fafd81c48..f28f84d86f6 100644 --- a/arch/arm/mach-meson/board-gx.c +++ b/arch/arm/mach-meson/board-gx.c @@ -16,12 +16,6 @@ #include #include #include -#include -#include -#include -#include -#include -#include DECLARE_GLOBAL_DATA_PTR; @@ -108,134 +102,3 @@ static struct mm_region gx_mem_map[] = { }; struct mm_region *mem_map = gx_mem_map; - -#if CONFIG_IS_ENABLED(USB_DWC3_MESON_GXL) && \ - CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG) -static struct dwc2_plat_otg_data meson_gx_dwc2_data; - -int board_usb_init(int index, enum usb_init_type init) -{ - struct fdtdec_phandle_args args; - const void *blob = gd->fdt_blob; - int node, dwc2_node; - struct udevice *dev, *clk_dev; - struct clk clk; - int ret; - - /* find the usb glue node */ - node = fdt_node_offset_by_compatible(blob, -1, - "amlogic,meson-gxl-usb-ctrl"); - if (node < 0) { - node = fdt_node_offset_by_compatible(blob, -1, - "amlogic,meson-gxm-usb-ctrl"); - if (node < 0) { - debug("Not found usb-control node\n"); - return -ENODEV; - } - } - - if (!fdtdec_get_is_enabled(blob, node)) { - debug("usb is disabled in the device tree\n"); - return -ENODEV; - } - - ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS, node, &dev); - if (ret) { - debug("Not found usb-control device\n"); - return ret; - } - - /* find the dwc2 node */ - dwc2_node = fdt_node_offset_by_compatible(blob, node, - "amlogic,meson-g12a-usb"); - if (dwc2_node < 0) { - debug("Not found dwc2 node\n"); - return -ENODEV; - } - - if (!fdtdec_get_is_enabled(blob, dwc2_node)) { - debug("dwc2 is disabled in the device tree\n"); - return -ENODEV; - } - - meson_gx_dwc2_data.regs_otg = fdtdec_get_addr(blob, dwc2_node, "reg"); - if (meson_gx_dwc2_data.regs_otg == FDT_ADDR_T_NONE) { - debug("usbotg: can't get base address\n"); - return -ENODATA; - } - - /* Enable clock */ - ret = fdtdec_parse_phandle_with_args(blob, dwc2_node, "clocks", - "#clock-cells", 0, 0, &args); - if (ret) { - debug("usbotg has no clocks defined in the device tree\n"); - return ret; - } - - ret = uclass_get_device_by_of_offset(UCLASS_CLK, args.node, &clk_dev); - if (ret) - return ret; - - if (args.args_count != 1) { - debug("Can't find clock ID in the device tree\n"); - return -ENODATA; - } - - clk.dev = clk_dev; - clk.id = args.args[0]; - - ret = clk_enable(&clk); - if (ret) { - debug("Failed to enable usbotg clock\n"); - return ret; - } - - meson_gx_dwc2_data.rx_fifo_sz = fdtdec_get_int(blob, dwc2_node, - "g-rx-fifo-size", 0); - meson_gx_dwc2_data.np_tx_fifo_sz = fdtdec_get_int(blob, dwc2_node, - "g-np-tx-fifo-size", 0); - meson_gx_dwc2_data.tx_fifo_sz = fdtdec_get_int(blob, dwc2_node, - "g-tx-fifo-size", 0); - - /* Switch to peripheral mode */ - ret = dwc3_meson_gxl_force_mode(dev, USB_DR_MODE_PERIPHERAL); - if (ret) - return ret; - - return dwc2_udc_probe(&meson_gx_dwc2_data); -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - const void *blob = gd->fdt_blob; - struct udevice *dev; - int node; - int ret; - - /* find the usb glue node */ - node = fdt_node_offset_by_compatible(blob, -1, - "amlogic,meson-gxl-usb-ctrl"); - if (node < 0) { - node = fdt_node_offset_by_compatible(blob, -1, - "amlogic,meson-gxm-usb-ctrl"); - if (node < 0) { - debug("Not found usb-control node\n"); - return -ENODEV; - } - } - - if (!fdtdec_get_is_enabled(blob, node)) - return -ENODEV; - - ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS, node, &dev); - if (ret) - return ret; - - /* Switch to OTG mode */ - ret = dwc3_meson_gxl_force_mode(dev, USB_DR_MODE_HOST); - if (ret) - return ret; - - return 0; -} -#endif diff --git a/configs/jethub_j100_defconfig b/configs/jethub_j100_defconfig index c2651580f87..dac775bd3bf 100644 --- a/configs/jethub_j100_defconfig +++ b/configs/jethub_j100_defconfig @@ -55,6 +55,7 @@ CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_DEBUG_UART_SKIP_INIT=y CONFIG_MESON_SERIAL=y CONFIG_USB=y +CONFIG_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC2=y diff --git a/configs/jethub_j80_defconfig b/configs/jethub_j80_defconfig index f3c47a001a6..1d11a961b93 100644 --- a/configs/jethub_j80_defconfig +++ b/configs/jethub_j80_defconfig @@ -59,6 +59,7 @@ CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_DEBUG_UART_SKIP_INIT=y CONFIG_MESON_SERIAL=y CONFIG_USB=y +CONFIG_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC2=y diff --git a/configs/khadas-vim2_defconfig b/configs/khadas-vim2_defconfig index a8d11a83c98..3af6b446ec2 100644 --- a/configs/khadas-vim2_defconfig +++ b/configs/khadas-vim2_defconfig @@ -59,6 +59,7 @@ CONFIG_MESON_SPIFC=y CONFIG_SYSINFO=y CONFIG_SYSINFO_SMBIOS=y CONFIG_USB=y +CONFIG_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y diff --git a/configs/khadas-vim_defconfig b/configs/khadas-vim_defconfig index d1ed45ff88e..6bb2200a6b6 100644 --- a/configs/khadas-vim_defconfig +++ b/configs/khadas-vim_defconfig @@ -50,6 +50,7 @@ CONFIG_MESON_SERIAL=y CONFIG_SYSINFO=y CONFIG_SYSINFO_SMBIOS=y CONFIG_USB=y +CONFIG_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y diff --git a/configs/libretech-ac_defconfig b/configs/libretech-ac_defconfig index a3331066924..2f44771a84a 100644 --- a/configs/libretech-ac_defconfig +++ b/configs/libretech-ac_defconfig @@ -65,6 +65,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_MESON_SPIFC=y CONFIG_USB=y +CONFIG_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y diff --git a/configs/libretech-cc_defconfig b/configs/libretech-cc_defconfig index 60b40e6270b..05311d8e08b 100644 --- a/configs/libretech-cc_defconfig +++ b/configs/libretech-cc_defconfig @@ -49,6 +49,7 @@ CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_DEBUG_UART_SKIP_INIT=y CONFIG_MESON_SERIAL=y CONFIG_USB=y +CONFIG_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y diff --git a/configs/libretech-s905d-pc_defconfig b/configs/libretech-s905d-pc_defconfig index d3e600ec028..4e3aee7542f 100644 --- a/configs/libretech-s905d-pc_defconfig +++ b/configs/libretech-s905d-pc_defconfig @@ -61,6 +61,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_MESON_SPIFC=y CONFIG_USB=y +CONFIG_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y diff --git a/configs/libretech-s912-pc_defconfig b/configs/libretech-s912-pc_defconfig index 8b4f052d085..c9ceb35ff67 100644 --- a/configs/libretech-s912-pc_defconfig +++ b/configs/libretech-s912-pc_defconfig @@ -60,6 +60,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_MESON_SPIFC=y CONFIG_USB=y +CONFIG_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y diff --git a/configs/s400_defconfig b/configs/s400_defconfig index 827bd548c7e..91930d7f485 100644 --- a/configs/s400_defconfig +++ b/configs/s400_defconfig @@ -42,6 +42,7 @@ CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_DEBUG_UART_SKIP_INIT=y CONFIG_MESON_SERIAL=y CONFIG_USB=y +CONFIG_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y diff --git a/configs/wetek-core2_defconfig b/configs/wetek-core2_defconfig index 13940dd56f9..b7307006303 100644 --- a/configs/wetek-core2_defconfig +++ b/configs/wetek-core2_defconfig @@ -51,6 +51,7 @@ CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_DEBUG_UART_SKIP_INIT=y CONFIG_MESON_SERIAL=y CONFIG_USB=y +CONFIG_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y