From: Antonio Borneo <antonio.borneo@foss.st.com>
Date: Thu, 23 Oct 2025 13:27:00 +0000 (+0200)
Subject: arm64: dts: st: Add I/O sync to eth pinctrl in stm32mp25-pinctrl.dtsi
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=e613ef5c1516b7b281f9f437598a6b3e320fffe1;p=thirdparty%2Fkernel%2Fstable.git

arm64: dts: st: Add I/O sync to eth pinctrl in stm32mp25-pinctrl.dtsi

On board stm32mp257f-ev1, the propagation delay between eth1/eth2
and the external PHY requires a compensation to guarantee that no
packet get lost in all the working conditions.

Add I/O synchronization properties in pinctrl on all the RGMII
data pins, activating re-sampling on both edges of the clock.

Co-developed-by: Christophe Roullier <christophe.roullier@foss.st.com>
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251023132700.1199871-13-antonio.borneo@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
---

diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
index e0d102eb6176..c34cd33cd855 100644
--- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
@@ -38,6 +38,7 @@
 			bias-disable;
 			drive-push-pull;
 			slew-rate = <3>;
+			st,io-sync = "data on both edges";
 		};
 		pins2 {
 			pinmux = <STM32_PINMUX('H', 9, AF10)>, /* ETH_RGMII_CLK125 */
@@ -53,6 +54,7 @@
 				 <STM32_PINMUX('H', 13, AF10)>, /* ETH_RGMII_RXD3 */
 				 <STM32_PINMUX('A', 11, AF10)>; /* ETH_RGMII_RX_CTL */
 			bias-disable;
+			st,io-sync = "data on both edges";
 		};
 		pins4 {
 			pinmux = <STM32_PINMUX('A', 14, AF10)>; /* ETH_RGMII_RX_CLK */
@@ -142,6 +144,7 @@
 			bias-disable;
 			drive-push-pull;
 			slew-rate = <3>;
+			st,io-sync = "data on both edges";
 		};
 		pins2 {
 			pinmux = <STM32_PINMUX('F', 8, AF10)>, /* ETH_RGMII_CLK125 */
@@ -164,6 +167,7 @@
 				 <STM32_PINMUX('C', 11, AF10)>, /* ETH_RGMII_RXD3 */
 				 <STM32_PINMUX('C', 3, AF10)>; /* ETH_RGMII_RX_CTL */
 			bias-disable;
+			st,io-sync = "data on both edges";
 		};
 		pins5 {
 			pinmux = <STM32_PINMUX('F', 6, AF10)>; /* ETH_RGMII_RX_CLK */