From: Fabrizio Castro Date: Thu, 9 May 2019 19:20:18 +0000 (+0100) Subject: dt-bindings: can: rcar_can: Fix RZ/G2 CAN clocks X-Git-Tag: v5.3-rc1~19^2~26^2~6 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=e6aacf9a52e0b013835c7e33538bcdf0703bbe2e;p=thirdparty%2Fkernel%2Flinux.git dt-bindings: can: rcar_can: Fix RZ/G2 CAN clocks According to the latest information, the clock options for CAN on RZ/G2 are the same as the ones available on R-Car Gen3 Fixes: 868b7c0f43e6 ("dt-bindings: can: rcar_can: Add r8a774a1 support") Signed-off-by: Fabrizio Castro Reviewed-by: Chris Paterson Reviewed-by: Rob Herring Acked-by: David S. Miller Signed-off-by: Simon Horman --- diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt index 9936b9ee67c36..e0dfc7c35fc5a 100644 --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt @@ -27,13 +27,8 @@ Required properties: - reg: physical base address and size of the R-Car CAN register map. - interrupts: interrupt specifier for the sole interrupt. -- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2 - devices. - phandles and clock specifiers for 3 CAN clock inputs for every other - SoC. -- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk". - 3 clock input name strings for every other SoC: "clkp1", "clkp2", - "can_clk". +- clocks: phandles and clock specifiers for 3 CAN clock inputs. +- clock-names: 3 clock input name strings: "clkp1", "clkp2", and "can_clk". - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must be "default". @@ -49,8 +44,7 @@ using the below properties: Optional properties: - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are: <0x0> (default) : Peripheral clock (clkp1) - <0x1> : Peripheral clock (clkp2) (not supported by - RZ/G2 devices) + <0x1> : Peripheral clock (clkp2) <0x3> : External input clock Example