From: Hans de Goede Date: Mon, 7 Jul 2025 21:14:12 +0000 (+0200) Subject: drm/i915/bios: Apply vlv_fixup_mipi_sequences() to v2 mipi-sequences too X-Git-Tag: v6.16-rc6~10^2~2^2 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=e778689390c71462a099b5d6e56d71c316486184;p=thirdparty%2Flinux.git drm/i915/bios: Apply vlv_fixup_mipi_sequences() to v2 mipi-sequences too It turns out that the fixup from vlv_fixup_mipi_sequences() is necessary for some DSI panel's with version 2 mipi-sequences too. Specifically the Acer Iconia One 8 A1-840 (not to be confused with the A1-840FHD which is different) has the following sequences: BDB block 53 (1284 bytes) - MIPI sequence block: Sequence block version v2 Panel 0 * Sequence 2 - MIPI_SEQ_INIT_OTP GPIO index 9, source 0, set 0 (0x00) Delay: 50000 us GPIO index 9, source 0, set 1 (0x01) Delay: 6000 us GPIO index 9, source 0, set 0 (0x00) Delay: 6000 us GPIO index 9, source 0, set 1 (0x01) Delay: 25000 us Send DCS: Port A, VC 0, LP, Type 39, Length 5, Data ff aa 55 a5 80 Send DCS: Port A, VC 0, LP, Type 39, Length 3, Data 6f 11 00 ... Send DCS: Port A, VC 0, LP, Type 05, Length 1, Data 29 Delay: 120000 us Sequence 4 - MIPI_SEQ_DISPLAY_OFF Send DCS: Port A, VC 0, LP, Type 05, Length 1, Data 28 Delay: 105000 us Send DCS: Port A, VC 0, LP, Type 05, Length 2, Data 10 00 Delay: 10000 us Sequence 5 - MIPI_SEQ_ASSERT_RESET Delay: 10000 us GPIO index 9, source 0, set 0 (0x00) Notice how there is no MIPI_SEQ_DEASSERT_RESET, instead the deassert is done at the beginning of MIPI_SEQ_INIT_OTP, which is exactly what the fixup from vlv_fixup_mipi_sequences() fixes up. Extend it to also apply to v2 sequences, this fixes the panel not working on the Acer Iconia One 8 A1-840. Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14605 Signed-off-by: Hans de Goede Acked-by: Jani Nikula Link: https://lore.kernel.org/r/20250703143824.7121-1-hansg@kernel.org Signed-off-by: Rodrigo Vivi (cherry picked from commit 11895f375939d60efe7ed5dddc1cffe2e79f976c) Signed-off-by: Rodrigo Vivi --- diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c index ba7b8938b17c..166ee11831ab 100644 --- a/drivers/gpu/drm/i915/display/intel_bios.c +++ b/drivers/gpu/drm/i915/display/intel_bios.c @@ -1938,7 +1938,7 @@ static int get_init_otp_deassert_fragment_len(struct intel_display *display, int index, len; if (drm_WARN_ON(display->drm, - !data || panel->vbt.dsi.seq_version != 1)) + !data || panel->vbt.dsi.seq_version >= 3)) return 0; /* index = 1 to skip sequence byte */ @@ -1961,7 +1961,7 @@ static int get_init_otp_deassert_fragment_len(struct intel_display *display, } /* - * Some v1 VBT MIPI sequences do the deassert in the init OTP sequence. + * Some v1/v2 VBT MIPI sequences do the deassert in the init OTP sequence. * The deassert must be done before calling intel_dsi_device_ready, so for * these devices we split the init OTP sequence into a deassert sequence and * the actual init OTP part. @@ -1972,9 +1972,9 @@ static void vlv_fixup_mipi_sequences(struct intel_display *display, u8 *init_otp; int len; - /* Limit this to v1 vid-mode sequences */ + /* Limit this to v1/v2 vid-mode sequences */ if (panel->vbt.dsi.config->is_cmd_mode || - panel->vbt.dsi.seq_version != 1) + panel->vbt.dsi.seq_version >= 3) return; /* Only do this if there are otp and assert seqs and no deassert seq */