From: Wouter Wijngaards Date: Thu, 26 Mar 2009 09:31:28 +0000 (+0000) Subject: Python work. X-Git-Tag: release-1.3.0~64 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=ebd14d9f35cf16c565a878fab062c8aa2a15bc2e;p=thirdparty%2Funbound.git Python work. git-svn-id: file:///svn/unbound/trunk@1559 be551aaa-1e26-0410-a405-d3ace91eadb9 --- diff --git a/Makefile.in b/Makefile.in index 4917b83e2..23535aa17 100644 --- a/Makefile.in +++ b/Makefile.in @@ -278,7 +278,7 @@ unbound-control-setup: $(srcdir)/smallapp/unbound-control-setup.sh # cp $(ldnsdir)/examples/ldns-testpkts.h testcode/ldns-testpkts.h ifeq "$(WITH_PYTHONMODULE)" "yes" -pythonmod/pythonmod.c: pythonmod/interface.h +$(srcdir)/pythonmod/pythonmod.c: pythonmod/interface.h %.h: $(srcdir)/%.i $(srcdir)/config.h @-if test ! -d $(dir $@); then $(INSTALL) -d $(patsubst %/,%,$(dir $@)); fi $(INFO) Swig $< diff --git a/doc/Changelog b/doc/Changelog index 35d4dc72f..dc784a588 100644 --- a/doc/Changelog +++ b/doc/Changelog @@ -1,3 +1,8 @@ +26 March 2009: Wouter + - ignore swig varargs warnings with gcc. + - remove duplicate example.conf text from python example configs. + - outofdir compile fix for python. + 25 March 2009: Wouter - initial import of the python contribution from Zdenek Vasicek and Marek Vavrusa. diff --git a/pythonmod/pythonmod.c b/pythonmod/pythonmod.c index 1bffae7f8..361b8998a 100644 --- a/pythonmod/pythonmod.c +++ b/pythonmod/pythonmod.c @@ -33,6 +33,12 @@ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ + +/* ignore the varargs unused warning from SWIGs internal vararg support */ +#ifdef __GNUC__ +#pragma GCC diagnostic ignored "-Wunused-parameter" +#endif + #include "config.h" #include "pythonmod/pythonmod.h" #include "util/module.h" diff --git a/pythonmod/test-calc.conf b/pythonmod/test-calc.conf index 47a9d2c22..ef854ce1b 100644 --- a/pythonmod/test-calc.conf +++ b/pythonmod/test-calc.conf @@ -1,438 +1,18 @@ -# -# Example configuration file. -# -# See unbound.conf(5) man page. -# -# this is a comment. - -#Use this to include other text into the file. -#include: "otherfile.conf" - -# The server clause sets the main parameters. +# Example configuration file for calc.py server: - # whitespace is not necessary, but looks cleaner. - - # verbosity number, 0 is least verbose. 1 is default. verbosity: 1 - - # print statistics to the log (for every thread) every N seconds. - # Set to "" or 0 to disable. Default is disabled. - # statistics-interval: 0 - - # enable cumulative statistics, without clearing them after printing. - # statistics-cumulative: no - - # enable extended statistics (query types, answer codes, status) - # printed from unbound-control. default off, because of speed. - # extended-statistics: no - - # number of threads to create. 1 disables threading. - # num-threads: 1 - - # specify the interfaces to answer queries from by ip-address. - # The default is to listen to localhost (127.0.0.1 and ::1). - # specify 0.0.0.0 and ::0 to bind to all available interfaces. - # specify every interface on a new 'interface:' labelled line. - # The listen interfaces are not changed on reload, only on restart. interface: 0.0.0.0 - # interface: 192.0.2.154 - # interface: 2001:DB8::5 - - # enable this feature to copy the source address of queries to reply. - # Socket options are not supported on all platforms. experimental. - # interface-automatic: no - - # port to answer queries from - # port: 53 - - # specify the interfaces to send outgoing queries to authoritative - # server from by ip-address. If none, the default (all) interface - # is used. Specify every interface on a 'outgoing-interface:' line. - # outgoing-interface: 192.0.2.153 - # outgoing-interface: 2001:DB8::5 - # outgoing-interface: 2001:DB8::6 - - # number of ports to allocate per thread, determines the size of the - # port range that can be open simultaneously. - # outgoing-range: 256 - - # permit unbound to use this port number or port range for - # making outgoing queries, using an outgoing interface. - # outgoing-port-permit: 32768 - - # deny unbound the use this of port number or port range for - # making outgoing queries, using an outgoing interface. - # Use this to make sure unbound does not grab a UDP port that some - # other server on this computer needs. The default is to avoid - # IANA-assigned port numbers. - # outgoing-port-avoid: "3200-3208" - - # number of outgoing simultaneous tcp buffers to hold per thread. - # outgoing-num-tcp: 10 - - # number of incoming simultaneous tcp buffers to hold per thread. - # incoming-num-tcp: 10 - - # buffer size for handling DNS data. No messages larger than this - # size can be sent or received, by UDP or TCP. In bytes. - # msg-buffer-size: 65552 - - # the amount of memory to use for the message cache. - # plain value in bytes or you can append k, m or G. default is "4Mb". - # msg-cache-size: 4m - - # the number of slabs to use for the message cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # msg-cache-slabs: 4 - - # the number of queries that a thread gets to service. - # num-queries-per-thread: 1024 - - # if very busy, 50% queries run to completion, 50% get timeout in msec - # jostle-timeout: 200 - - # the amount of memory to use for the RRset cache. - # plain value in bytes or you can append k, m or G. default is "4Mb". - # rrset-cache-size: 4m - - # the number of slabs to use for the RRset cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # rrset-cache-slabs: 4 - - # the time to live (TTL) value cap for RRsets and messages in the - # cache. Items are not cached for longer. In seconds. - # cache-max-ttl: 86400 - - # the time to live (TTL) value for cached roundtrip times and - # EDNS version information for hosts. In seconds. - # infra-host-ttl: 900 - - # the time to live (TTL) value for cached lame delegations. In sec. - # infra-lame-ttl: 900 - - # the number of slabs to use for the Infrastructure cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # infra-cache-slabs: 4 - - # the maximum number of hosts that are cached (roundtrip times, EDNS). - # infra-cache-numhosts: 10000 - - # the maximum size of the lame zones cached per host. in bytes. - # infra-cache-lame-size: 10k - - # Enable IPv4, "yes" or "no". - # do-ip4: yes - - # Enable IPv6, "yes" or "no". - # do-ip6: yes - - # Enable UDP, "yes" or "no". - # do-udp: yes - - # Enable TCP, "yes" or "no". - # do-tcp: yes - - # Detach from the terminal, run in background, "yes" or "no". do-daemonize: no - - # control which clients are allowed to make (recursive) queries - # to this server. Specify classless netblocks with /size and action. - # By default everything is refused, except for localhost. - # Choose deny (drop message), refuse (polite error reply), - # allow (recursive ok), allow_snoop (recursive and nonrecursive ok) access-control: 0.0.0.0/0 allow - # access-control: 127.0.0.0/8 allow - # access-control: ::0/0 refuse - # access-control: ::1 allow - # access-control: ::ffff:127.0.0.1 allow - - # if given, a chroot(2) is done to the given directory. - # i.e. you can chroot to the working directory, for example, - # for extra security, but make sure all files are in that directory. - # - # If chroot is enabled, you should pass the configfile (from the - # commandline) as a full path from the original root. After the - # chroot has been performed the now defunct portion of the config - # file path is removed to be able to reread the config after a reload. - # - # All other file paths (working dir, logfile, roothints, and - # key files) can be specified in several ways: - # o as an absolute path relative to the new root. - # o as a relative path to the working directory. - # o as an absolute path relative to the original root. - # In the last case the path is adjusted to remove the unused portion. - # - # The pid file can be absolute and outside of the chroot, it is - # written just prior to performing the chroot and dropping permissions. - # - # Additionally, unbound may need to access /dev/random (for entropy). - # How to do this is specific to your OS. - # - # If you give "" no chroot is performed. The path must not end in a /. - chroot: "" - - # if given, user privileges are dropped (after binding port), - # and the given username is assumed. Default is user "unbound". - # If you give "" no privileges are dropped. + chroot: "" username: "" - - # the working directory. The relative files in this config are - # relative to this directory. If you give "" the working directory - # is not changed. directory: "" - - # the log file, "" means log to stderr. - # Use of this option sets use-syslog to "no". logfile: "" - - # Log to syslog(3) if yes. The log facility LOG_DAEMON is used to - # log to, with identity "unbound". If yes, it overrides the logfile. - # use-syslog: yes - - # the pid file. Can be an absolute path outside of chroot/work dir. pidfile: "unbound.pid" - - # file to read root hints from. - # get one from ftp://FTP.INTERNIC.NET/domain/named.cache - # root-hints: "" - - # enable to not answer id.server and hostname.bind queries. - # hide-identity: no - - # enable to not answer version.server and version.bind queries. - # hide-version: no - - # the identity to report. Leave "" or default to return hostname. - # identity: "" - - # the version to report. Leave "" or default to return package version. - # version: "" - - # the target fetch policy. - # series of integers describing the policy per dependency depth. - # The number of values in the list determines the maximum dependency - # depth the recursor will pursue before giving up. Each integer means: - # -1 : fetch all targets opportunistically, - # 0: fetch on demand, - # positive value: fetch that many targets opportunistically. - # Enclose the list of numbers between quotes (""). - # target-fetch-policy: "3 2 1 0 0" - - # Harden against very small EDNS buffer sizes. - # harden-short-bufsize: no - - # Harden against unseemly large queries. - # harden-large-queries: no - - # Harden against out of zone rrsets, to avoid spoofing attempts. - # harden-glue: yes - - # Harden against receiving dnssec-stripped data. If you turn it - # off, failing to validate dnskey data for a trustanchor will - # trigger insecure mode for that zone (like without a trustanchor). - # Default on, which insists on dnssec data for trust-anchored zones. - # harden-dnssec-stripped: yes - - # Harden the referral path by performing additional queries for - # infrastructure data. Validates the replies (if possible). - # Default off, because the lookups burden the server. Experimental - # implementation of draft-wijngaards-dnsext-resolver-side-mitigation. - # harden-referral-path: no - - # Use 0x20-encoded random bits in the query to foil spoof attempts. - # This feature is an experimental implementation of draft dns-0x20. - # use-caps-for-id: no - - # Enforce privacy of these addresses. Strips them away from answers. - # It may cause DNSSEC validation to additionally mark it as bogus. - # Protects against 'DNS Rebinding' (uses browser as network proxy). - # Only 'private-domain' and 'local-data' names are allowed to have - # these private addresses. No default. - # private-address: 10.0.0.0/8 - # private-address: 172.16.0.0/12 - # private-address: 192.168.0.0/16 - # private-address: 192.254.0.0/16 - # private-address: fd00::/8 - # private-address: fe80::/10 - - # Allow the domain (and its subdomains) to contain private addresses. - # local-data statements are allowed to contain private addresses too. - # private-domain: "example.com" - - # If nonzero, unwanted replies are not only reported in statistics, - # but also a running total is kept per thread. If it reaches the - # threshold, a warning is printed and a defensive action is taken, - # the cache is cleared to flush potential poison out of it. - # A suggested value is 10000000, the default is 0 (turned off). - # unwanted-reply-threshold: 0 - - # Do not query the following addresses. No DNS queries are sent there. - # List one address per entry. List classless netblocks with /size, - # do-not-query-address: 127.0.0.1/8 - # do-not-query-address: ::1 - - # if yes, the above default do-not-query-address entries are present. - # if no, localhost can be queried (for testing and debugging). - # do-not-query-localhost: yes - - # module configuration of the server. A string with identifiers - # separated by spaces. "iterator" or "validator iterator" - module-config: "validator python iterator" - - # File with DLV trusted keys. Same format as trust-anchor-file. - # There can be only one DLV configured, it is trusted from root down. - # Download https://secure.isc.org/ops/dlv/dlv.isc.org.key - # dlv-anchor-file: "dlv.isc.org.key" - - # File with trusted keys for validation. Specify more than one file - # with several entries, one file per entry. - # Zone file format, with DS and DNSKEY entries. - # trust-anchor-file: "" - - # Trusted key for validation. DS or DNSKEY. specify the RR on a - # single line, surrounded by "". TTL is ignored. class is IN default. - # (These examples are from August 2007 and may not be valid anymore). - # trust-anchor: "nlnetlabs.nl. DNSKEY 257 3 5 AQPzzTWMz8qSWIQlfRnPckx2BiVmkVN6LPupO3mbz7FhLSnm26n6iG9N Lby97Ji453aWZY3M5/xJBSOS2vWtco2t8C0+xeO1bc/d6ZTy32DHchpW 6rDH1vp86Ll+ha0tmwyy9QP7y2bVw5zSbFCrefk8qCUBgfHm9bHzMG1U BYtEIQ==" - # trust-anchor: "jelte.nlnetlabs.nl. DS 42860 5 1 14D739EB566D2B1A5E216A0BA4D17FA9B038BE4A" - - # File with trusted keys for validation. Specify more than one file - # with several entries, one file per entry. Like trust-anchor-file - # but has a different file format. Format is BIND-9 style format, - # the trusted-keys { name flag proto algo "key"; }; clauses are read. - # trusted-keys-file: "" - - # Override the date for validation with a specific fixed date. - # Do not set this unless you are debugging signature inception - # and expiration. "" or "0" turns the feature off. - # val-override-date: "" - - # The time to live for bogus data, rrsets and messages. This avoids - # some of the revalidation, until the time interval expires. in secs. - # val-bogus-ttl: 60 - - # Should additional section of secure message also be kept clean of - # unsecure data. Useful to shield the users of this validator from - # potential bogus data in the additional section. All unsigned data - # in the additional section is removed from secure messages. - # val-clean-additional: yes - - # Turn permissive mode on to permit bogus messages. Thus, messages - # for which security checks failed will be returned to clients, - # instead of SERVFAIL. It still performs the security checks, which - # result in interesting log files and possibly the AD bit in - # replies if the message is found secure. The default is off. - # val-permissive-mode: no - - # It is possible to configure NSEC3 maximum iteration counts per - # keysize. Keep this table very short, as linear search is done. - # A message with an NSEC3 with larger count is marked insecure. - # List in ascending order the keysize and count values. - # val-nsec3-keysize-iterations: "1024 150 2048 500 4096 2500" - - # the amount of memory to use for the key cache. - # plain value in bytes or you can append k, m or G. default is "4Mb". - # key-cache-size: 4m - - # the number of slabs to use for the key cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # key-cache-slabs: 4 - - # the amount of memory to use for the negative cache (used for DLV). - # plain value in bytes or you can append k, m or G. default is "1Mb". - # neg-cache-size: 1m - - # a number of locally served zones can be configured. - # local-zone: - # local-data: "" - # o deny serves local data (if any), else, drops queries. - # o refuse serves local data (if any), else, replies with error. - # o static serves local data, else, nxdomain or nodata answer. - # o transparent serves local data, else, resolves normally . - # o redirect serves the zone data for any subdomain in the zone. - # o nodefault can be used to normally resolve AS112 zones. - # - # defaults are localhost address, reverse for 127.0.0.1 and ::1 - # and nxdomain for AS112 zones. If you configure one of these zones - # the default content is omitted, or you can omit it with 'nodefault'. - # - # If you configure local-data without specifying local-zone, by - # default a transparent local-zone is created for the data. - # - # You can add locally served data with - # local-zone: "local." static - # local-data: "mycomputer.local. IN A 192.0.2.51" - # local-data: 'mytext.local TXT "content of text record"' - # - # You can override certain queries with - # local-data: "adserver.example.com A 127.0.0.1" - # - # You can redirect a domain to a fixed address with - # (this makes example.com, www.example.com, etc, all go to 192.0.2.3) - # local-zone: "example.com" redirect - # local-data: "example.com A 192.0.2.3" - # - # Shorthand to make PTR records, "IPv4 name" or "IPv6 name". - # You can also add PTR records using local-data directly, but then - # you need to do the reverse notation yourself. - # local-data-ptr: "192.0.2.3 www.example.com" + module-config: "validator python iterator" # Python config section python: - # Script file to load - python-script: "./examples/calc.py" - -# Remote control config section. -remote-control: - # Enable remote control with unbound-control(8) here. - # set up the keys and certificates with unbound-control-setup. - # control-enable: no - - # what interfaces are listened to for remote control. - # give 0.0.0.0 and ::0 to listen to all interfaces. - # control-interface: 127.0.0.1 - # control-interface: ::1 - - # port number for remote control operations. - # control-port: 953 - - # unbound server key file. - # server-key-file: "/usr/local/etc/unbound/unbound_server.key" - - # unbound server certificate file. - # server-cert-file: "/usr/local/etc/unbound/unbound_server.pem" - - # unbound-control key file. - # control-key-file: "/usr/local/etc/unbound/unbound_control.key" - - # unbound-control certificate file. - # control-cert-file: "/usr/local/etc/unbound/unbound_control.pem" - -# Stub zones. -# Create entries like below, to make all queries for 'example.com' and -# 'example.org' go to the given list of nameservers. list zero or more -# nameservers by hostname or by ipaddress. If you set stub-prime to yes, -# the list is treated as priming hints (default is no). -# stub-zone: -# name: "example.com" -# stub-addr: 192.0.2.68 -# stub-prime: "no" -# stub-zone: -# name: "example.org" -# stub-host: ns.example.com. + # Script file to load + python-script: "./examples/calc.py" -# Forward zones -# Create entries like below, to make all queries for 'example.com' and -# 'example.org' go to the given list of servers. These servers have to handle -# recursion to other nameservers. List zero or more nameservers by hostname -# or by ipaddress. Use an entry with name "." to forward all queries. -# forward-zone: -# name: "example.com" -# forward-addr: 192.0.2.68 -# forward-addr: 192.0.2.73@5355 # forward to port 5355. -# forward-zone: -# name: "example.org" -# forward-host: fwd.example.com diff --git a/pythonmod/test-dict.conf b/pythonmod/test-dict.conf index 8f032833f..daab7250e 100644 --- a/pythonmod/test-dict.conf +++ b/pythonmod/test-dict.conf @@ -1,438 +1,18 @@ -# -# Example configuration file. -# -# See unbound.conf(5) man page. -# -# this is a comment. - -#Use this to include other text into the file. -#include: "otherfile.conf" - -# The server clause sets the main parameters. +# Example configuration file for dict.py server: - # whitespace is not necessary, but looks cleaner. - - # verbosity number, 0 is least verbose. 1 is default. verbosity: 1 - - # print statistics to the log (for every thread) every N seconds. - # Set to "" or 0 to disable. Default is disabled. - # statistics-interval: 0 - - # enable cumulative statistics, without clearing them after printing. - # statistics-cumulative: no - - # enable extended statistics (query types, answer codes, status) - # printed from unbound-control. default off, because of speed. - # extended-statistics: no - - # number of threads to create. 1 disables threading. - # num-threads: 1 - - # specify the interfaces to answer queries from by ip-address. - # The default is to listen to localhost (127.0.0.1 and ::1). - # specify 0.0.0.0 and ::0 to bind to all available interfaces. - # specify every interface on a new 'interface:' labelled line. - # The listen interfaces are not changed on reload, only on restart. interface: 0.0.0.0 - # interface: 192.0.2.154 - # interface: 2001:DB8::5 - - # enable this feature to copy the source address of queries to reply. - # Socket options are not supported on all platforms. experimental. - # interface-automatic: no - - # port to answer queries from - # port: 53 - - # specify the interfaces to send outgoing queries to authoritative - # server from by ip-address. If none, the default (all) interface - # is used. Specify every interface on a 'outgoing-interface:' line. - # outgoing-interface: 192.0.2.153 - # outgoing-interface: 2001:DB8::5 - # outgoing-interface: 2001:DB8::6 - - # number of ports to allocate per thread, determines the size of the - # port range that can be open simultaneously. - # outgoing-range: 256 - - # permit unbound to use this port number or port range for - # making outgoing queries, using an outgoing interface. - # outgoing-port-permit: 32768 - - # deny unbound the use this of port number or port range for - # making outgoing queries, using an outgoing interface. - # Use this to make sure unbound does not grab a UDP port that some - # other server on this computer needs. The default is to avoid - # IANA-assigned port numbers. - # outgoing-port-avoid: "3200-3208" - - # number of outgoing simultaneous tcp buffers to hold per thread. - # outgoing-num-tcp: 10 - - # number of incoming simultaneous tcp buffers to hold per thread. - # incoming-num-tcp: 10 - - # buffer size for handling DNS data. No messages larger than this - # size can be sent or received, by UDP or TCP. In bytes. - # msg-buffer-size: 65552 - - # the amount of memory to use for the message cache. - # plain value in bytes or you can append k, m or G. default is "4Mb". - # msg-cache-size: 4m - - # the number of slabs to use for the message cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # msg-cache-slabs: 4 - - # the number of queries that a thread gets to service. - # num-queries-per-thread: 1024 - - # if very busy, 50% queries run to completion, 50% get timeout in msec - # jostle-timeout: 200 - - # the amount of memory to use for the RRset cache. - # plain value in bytes or you can append k, m or G. default is "4Mb". - # rrset-cache-size: 4m - - # the number of slabs to use for the RRset cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # rrset-cache-slabs: 4 - - # the time to live (TTL) value cap for RRsets and messages in the - # cache. Items are not cached for longer. In seconds. - # cache-max-ttl: 86400 - - # the time to live (TTL) value for cached roundtrip times and - # EDNS version information for hosts. In seconds. - # infra-host-ttl: 900 - - # the time to live (TTL) value for cached lame delegations. In sec. - # infra-lame-ttl: 900 - - # the number of slabs to use for the Infrastructure cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # infra-cache-slabs: 4 - - # the maximum number of hosts that are cached (roundtrip times, EDNS). - # infra-cache-numhosts: 10000 - - # the maximum size of the lame zones cached per host. in bytes. - # infra-cache-lame-size: 10k - - # Enable IPv4, "yes" or "no". - # do-ip4: yes - - # Enable IPv6, "yes" or "no". - # do-ip6: yes - - # Enable UDP, "yes" or "no". - # do-udp: yes - - # Enable TCP, "yes" or "no". - # do-tcp: yes - - # Detach from the terminal, run in background, "yes" or "no". do-daemonize: no - - # control which clients are allowed to make (recursive) queries - # to this server. Specify classless netblocks with /size and action. - # By default everything is refused, except for localhost. - # Choose deny (drop message), refuse (polite error reply), - # allow (recursive ok), allow_snoop (recursive and nonrecursive ok) access-control: 0.0.0.0/0 allow - # access-control: 127.0.0.0/8 allow - # access-control: ::0/0 refuse - # access-control: ::1 allow - # access-control: ::ffff:127.0.0.1 allow - - # if given, a chroot(2) is done to the given directory. - # i.e. you can chroot to the working directory, for example, - # for extra security, but make sure all files are in that directory. - # - # If chroot is enabled, you should pass the configfile (from the - # commandline) as a full path from the original root. After the - # chroot has been performed the now defunct portion of the config - # file path is removed to be able to reread the config after a reload. - # - # All other file paths (working dir, logfile, roothints, and - # key files) can be specified in several ways: - # o as an absolute path relative to the new root. - # o as a relative path to the working directory. - # o as an absolute path relative to the original root. - # In the last case the path is adjusted to remove the unused portion. - # - # The pid file can be absolute and outside of the chroot, it is - # written just prior to performing the chroot and dropping permissions. - # - # Additionally, unbound may need to access /dev/random (for entropy). - # How to do this is specific to your OS. - # - # If you give "" no chroot is performed. The path must not end in a /. - chroot: "" - - # if given, user privileges are dropped (after binding port), - # and the given username is assumed. Default is user "unbound". - # If you give "" no privileges are dropped. + chroot: "" username: "" - - # the working directory. The relative files in this config are - # relative to this directory. If you give "" the working directory - # is not changed. directory: "" - - # the log file, "" means log to stderr. - # Use of this option sets use-syslog to "no". logfile: "" - - # Log to syslog(3) if yes. The log facility LOG_DAEMON is used to - # log to, with identity "unbound". If yes, it overrides the logfile. - # use-syslog: yes - - # the pid file. Can be an absolute path outside of chroot/work dir. pidfile: "unbound.pid" - - # file to read root hints from. - # get one from ftp://FTP.INTERNIC.NET/domain/named.cache - # root-hints: "" - - # enable to not answer id.server and hostname.bind queries. - # hide-identity: no - - # enable to not answer version.server and version.bind queries. - # hide-version: no - - # the identity to report. Leave "" or default to return hostname. - # identity: "" - - # the version to report. Leave "" or default to return package version. - # version: "" - - # the target fetch policy. - # series of integers describing the policy per dependency depth. - # The number of values in the list determines the maximum dependency - # depth the recursor will pursue before giving up. Each integer means: - # -1 : fetch all targets opportunistically, - # 0: fetch on demand, - # positive value: fetch that many targets opportunistically. - # Enclose the list of numbers between quotes (""). - # target-fetch-policy: "3 2 1 0 0" - - # Harden against very small EDNS buffer sizes. - # harden-short-bufsize: no - - # Harden against unseemly large queries. - # harden-large-queries: no - - # Harden against out of zone rrsets, to avoid spoofing attempts. - # harden-glue: yes - - # Harden against receiving dnssec-stripped data. If you turn it - # off, failing to validate dnskey data for a trustanchor will - # trigger insecure mode for that zone (like without a trustanchor). - # Default on, which insists on dnssec data for trust-anchored zones. - # harden-dnssec-stripped: yes - - # Harden the referral path by performing additional queries for - # infrastructure data. Validates the replies (if possible). - # Default off, because the lookups burden the server. Experimental - # implementation of draft-wijngaards-dnsext-resolver-side-mitigation. - # harden-referral-path: no - - # Use 0x20-encoded random bits in the query to foil spoof attempts. - # This feature is an experimental implementation of draft dns-0x20. - # use-caps-for-id: no - - # Enforce privacy of these addresses. Strips them away from answers. - # It may cause DNSSEC validation to additionally mark it as bogus. - # Protects against 'DNS Rebinding' (uses browser as network proxy). - # Only 'private-domain' and 'local-data' names are allowed to have - # these private addresses. No default. - # private-address: 10.0.0.0/8 - # private-address: 172.16.0.0/12 - # private-address: 192.168.0.0/16 - # private-address: 192.254.0.0/16 - # private-address: fd00::/8 - # private-address: fe80::/10 - - # Allow the domain (and its subdomains) to contain private addresses. - # local-data statements are allowed to contain private addresses too. - # private-domain: "example.com" - - # If nonzero, unwanted replies are not only reported in statistics, - # but also a running total is kept per thread. If it reaches the - # threshold, a warning is printed and a defensive action is taken, - # the cache is cleared to flush potential poison out of it. - # A suggested value is 10000000, the default is 0 (turned off). - # unwanted-reply-threshold: 0 - - # Do not query the following addresses. No DNS queries are sent there. - # List one address per entry. List classless netblocks with /size, - # do-not-query-address: 127.0.0.1/8 - # do-not-query-address: ::1 - - # if yes, the above default do-not-query-address entries are present. - # if no, localhost can be queried (for testing and debugging). - # do-not-query-localhost: yes - - # module configuration of the server. A string with identifiers - # separated by spaces. "iterator" or "validator iterator" - module-config: "validator python iterator" - - # File with DLV trusted keys. Same format as trust-anchor-file. - # There can be only one DLV configured, it is trusted from root down. - # Download https://secure.isc.org/ops/dlv/dlv.isc.org.key - # dlv-anchor-file: "dlv.isc.org.key" - - # File with trusted keys for validation. Specify more than one file - # with several entries, one file per entry. - # Zone file format, with DS and DNSKEY entries. - # trust-anchor-file: "" - - # Trusted key for validation. DS or DNSKEY. specify the RR on a - # single line, surrounded by "". TTL is ignored. class is IN default. - # (These examples are from August 2007 and may not be valid anymore). - # trust-anchor: "nlnetlabs.nl. DNSKEY 257 3 5 AQPzzTWMz8qSWIQlfRnPckx2BiVmkVN6LPupO3mbz7FhLSnm26n6iG9N Lby97Ji453aWZY3M5/xJBSOS2vWtco2t8C0+xeO1bc/d6ZTy32DHchpW 6rDH1vp86Ll+ha0tmwyy9QP7y2bVw5zSbFCrefk8qCUBgfHm9bHzMG1U BYtEIQ==" - # trust-anchor: "jelte.nlnetlabs.nl. DS 42860 5 1 14D739EB566D2B1A5E216A0BA4D17FA9B038BE4A" - - # File with trusted keys for validation. Specify more than one file - # with several entries, one file per entry. Like trust-anchor-file - # but has a different file format. Format is BIND-9 style format, - # the trusted-keys { name flag proto algo "key"; }; clauses are read. - # trusted-keys-file: "" - - # Override the date for validation with a specific fixed date. - # Do not set this unless you are debugging signature inception - # and expiration. "" or "0" turns the feature off. - # val-override-date: "" - - # The time to live for bogus data, rrsets and messages. This avoids - # some of the revalidation, until the time interval expires. in secs. - # val-bogus-ttl: 60 - - # Should additional section of secure message also be kept clean of - # unsecure data. Useful to shield the users of this validator from - # potential bogus data in the additional section. All unsigned data - # in the additional section is removed from secure messages. - # val-clean-additional: yes - - # Turn permissive mode on to permit bogus messages. Thus, messages - # for which security checks failed will be returned to clients, - # instead of SERVFAIL. It still performs the security checks, which - # result in interesting log files and possibly the AD bit in - # replies if the message is found secure. The default is off. - # val-permissive-mode: no - - # It is possible to configure NSEC3 maximum iteration counts per - # keysize. Keep this table very short, as linear search is done. - # A message with an NSEC3 with larger count is marked insecure. - # List in ascending order the keysize and count values. - # val-nsec3-keysize-iterations: "1024 150 2048 500 4096 2500" - - # the amount of memory to use for the key cache. - # plain value in bytes or you can append k, m or G. default is "4Mb". - # key-cache-size: 4m - - # the number of slabs to use for the key cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # key-cache-slabs: 4 - - # the amount of memory to use for the negative cache (used for DLV). - # plain value in bytes or you can append k, m or G. default is "1Mb". - # neg-cache-size: 1m - - # a number of locally served zones can be configured. - # local-zone: - # local-data: "" - # o deny serves local data (if any), else, drops queries. - # o refuse serves local data (if any), else, replies with error. - # o static serves local data, else, nxdomain or nodata answer. - # o transparent serves local data, else, resolves normally . - # o redirect serves the zone data for any subdomain in the zone. - # o nodefault can be used to normally resolve AS112 zones. - # - # defaults are localhost address, reverse for 127.0.0.1 and ::1 - # and nxdomain for AS112 zones. If you configure one of these zones - # the default content is omitted, or you can omit it with 'nodefault'. - # - # If you configure local-data without specifying local-zone, by - # default a transparent local-zone is created for the data. - # - # You can add locally served data with - # local-zone: "local." static - # local-data: "mycomputer.local. IN A 192.0.2.51" - # local-data: 'mytext.local TXT "content of text record"' - # - # You can override certain queries with - # local-data: "adserver.example.com A 127.0.0.1" - # - # You can redirect a domain to a fixed address with - # (this makes example.com, www.example.com, etc, all go to 192.0.2.3) - # local-zone: "example.com" redirect - # local-data: "example.com A 192.0.2.3" - # - # Shorthand to make PTR records, "IPv4 name" or "IPv6 name". - # You can also add PTR records using local-data directly, but then - # you need to do the reverse notation yourself. - # local-data-ptr: "192.0.2.3 www.example.com" + module-config: "validator python iterator" # Python config section python: - # Script file to load - python-script: "./examples/dict.py" - -# Remote control config section. -remote-control: - # Enable remote control with unbound-control(8) here. - # set up the keys and certificates with unbound-control-setup. - # control-enable: no - - # what interfaces are listened to for remote control. - # give 0.0.0.0 and ::0 to listen to all interfaces. - # control-interface: 127.0.0.1 - # control-interface: ::1 - - # port number for remote control operations. - # control-port: 953 - - # unbound server key file. - # server-key-file: "/usr/local/etc/unbound/unbound_server.key" - - # unbound server certificate file. - # server-cert-file: "/usr/local/etc/unbound/unbound_server.pem" - - # unbound-control key file. - # control-key-file: "/usr/local/etc/unbound/unbound_control.key" - - # unbound-control certificate file. - # control-cert-file: "/usr/local/etc/unbound/unbound_control.pem" - -# Stub zones. -# Create entries like below, to make all queries for 'example.com' and -# 'example.org' go to the given list of nameservers. list zero or more -# nameservers by hostname or by ipaddress. If you set stub-prime to yes, -# the list is treated as priming hints (default is no). -# stub-zone: -# name: "example.com" -# stub-addr: 192.0.2.68 -# stub-prime: "no" -# stub-zone: -# name: "example.org" -# stub-host: ns.example.com. + # Script file to load + python-script: "./examples/dict.py" -# Forward zones -# Create entries like below, to make all queries for 'example.com' and -# 'example.org' go to the given list of servers. These servers have to handle -# recursion to other nameservers. List zero or more nameservers by hostname -# or by ipaddress. Use an entry with name "." to forward all queries. -# forward-zone: -# name: "example.com" -# forward-addr: 192.0.2.68 -# forward-addr: 192.0.2.73@5355 # forward to port 5355. -# forward-zone: -# name: "example.org" -# forward-host: fwd.example.com diff --git a/pythonmod/test-log.conf b/pythonmod/test-log.conf index 8237e6a89..02214ba1d 100644 --- a/pythonmod/test-log.conf +++ b/pythonmod/test-log.conf @@ -1,438 +1,17 @@ -# -# Example configuration file. -# -# See unbound.conf(5) man page. -# -# this is a comment. - -#Use this to include other text into the file. -#include: "otherfile.conf" - -# The server clause sets the main parameters. +# Example configuration file for log.py server: - # whitespace is not necessary, but looks cleaner. - - # verbosity number, 0 is least verbose. 1 is default. verbosity: 1 - - # print statistics to the log (for every thread) every N seconds. - # Set to "" or 0 to disable. Default is disabled. - # statistics-interval: 0 - - # enable cumulative statistics, without clearing them after printing. - # statistics-cumulative: no - - # enable extended statistics (query types, answer codes, status) - # printed from unbound-control. default off, because of speed. - # extended-statistics: no - - # number of threads to create. 1 disables threading. - # num-threads: 1 - - # specify the interfaces to answer queries from by ip-address. - # The default is to listen to localhost (127.0.0.1 and ::1). - # specify 0.0.0.0 and ::0 to bind to all available interfaces. - # specify every interface on a new 'interface:' labelled line. - # The listen interfaces are not changed on reload, only on restart. interface: 0.0.0.0 - # interface: 192.0.2.154 - # interface: 2001:DB8::5 - - # enable this feature to copy the source address of queries to reply. - # Socket options are not supported on all platforms. experimental. - # interface-automatic: no - - # port to answer queries from - # port: 53 - - # specify the interfaces to send outgoing queries to authoritative - # server from by ip-address. If none, the default (all) interface - # is used. Specify every interface on a 'outgoing-interface:' line. - # outgoing-interface: 192.0.2.153 - # outgoing-interface: 2001:DB8::5 - # outgoing-interface: 2001:DB8::6 - - # number of ports to allocate per thread, determines the size of the - # port range that can be open simultaneously. - # outgoing-range: 256 - - # permit unbound to use this port number or port range for - # making outgoing queries, using an outgoing interface. - # outgoing-port-permit: 32768 - - # deny unbound the use this of port number or port range for - # making outgoing queries, using an outgoing interface. - # Use this to make sure unbound does not grab a UDP port that some - # other server on this computer needs. The default is to avoid - # IANA-assigned port numbers. - # outgoing-port-avoid: "3200-3208" - - # number of outgoing simultaneous tcp buffers to hold per thread. - # outgoing-num-tcp: 10 - - # number of incoming simultaneous tcp buffers to hold per thread. - # incoming-num-tcp: 10 - - # buffer size for handling DNS data. No messages larger than this - # size can be sent or received, by UDP or TCP. In bytes. - # msg-buffer-size: 65552 - - # the amount of memory to use for the message cache. - # plain value in bytes or you can append k, m or G. default is "4Mb". - # msg-cache-size: 4m - - # the number of slabs to use for the message cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # msg-cache-slabs: 4 - - # the number of queries that a thread gets to service. - # num-queries-per-thread: 1024 - - # if very busy, 50% queries run to completion, 50% get timeout in msec - # jostle-timeout: 200 - - # the amount of memory to use for the RRset cache. - # plain value in bytes or you can append k, m or G. default is "4Mb". - # rrset-cache-size: 4m - - # the number of slabs to use for the RRset cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # rrset-cache-slabs: 4 - - # the time to live (TTL) value cap for RRsets and messages in the - # cache. Items are not cached for longer. In seconds. - # cache-max-ttl: 86400 - - # the time to live (TTL) value for cached roundtrip times and - # EDNS version information for hosts. In seconds. - # infra-host-ttl: 900 - - # the time to live (TTL) value for cached lame delegations. In sec. - # infra-lame-ttl: 900 - - # the number of slabs to use for the Infrastructure cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # infra-cache-slabs: 4 - - # the maximum number of hosts that are cached (roundtrip times, EDNS). - # infra-cache-numhosts: 10000 - - # the maximum size of the lame zones cached per host. in bytes. - # infra-cache-lame-size: 10k - - # Enable IPv4, "yes" or "no". - # do-ip4: yes - - # Enable IPv6, "yes" or "no". - # do-ip6: yes - - # Enable UDP, "yes" or "no". - # do-udp: yes - - # Enable TCP, "yes" or "no". - # do-tcp: yes - - # Detach from the terminal, run in background, "yes" or "no". do-daemonize: no - - # control which clients are allowed to make (recursive) queries - # to this server. Specify classless netblocks with /size and action. - # By default everything is refused, except for localhost. - # Choose deny (drop message), refuse (polite error reply), - # allow (recursive ok), allow_snoop (recursive and nonrecursive ok) access-control: 0.0.0.0/0 allow - # access-control: 127.0.0.0/8 allow - # access-control: ::0/0 refuse - # access-control: ::1 allow - # access-control: ::ffff:127.0.0.1 allow - - # if given, a chroot(2) is done to the given directory. - # i.e. you can chroot to the working directory, for example, - # for extra security, but make sure all files are in that directory. - # - # If chroot is enabled, you should pass the configfile (from the - # commandline) as a full path from the original root. After the - # chroot has been performed the now defunct portion of the config - # file path is removed to be able to reread the config after a reload. - # - # All other file paths (working dir, logfile, roothints, and - # key files) can be specified in several ways: - # o as an absolute path relative to the new root. - # o as a relative path to the working directory. - # o as an absolute path relative to the original root. - # In the last case the path is adjusted to remove the unused portion. - # - # The pid file can be absolute and outside of the chroot, it is - # written just prior to performing the chroot and dropping permissions. - # - # Additionally, unbound may need to access /dev/random (for entropy). - # How to do this is specific to your OS. - # - # If you give "" no chroot is performed. The path must not end in a /. - chroot: "" - - # if given, user privileges are dropped (after binding port), - # and the given username is assumed. Default is user "unbound". - # If you give "" no privileges are dropped. + chroot: "" username: "" - - # the working directory. The relative files in this config are - # relative to this directory. If you give "" the working directory - # is not changed. directory: "" - - # the log file, "" means log to stderr. - # Use of this option sets use-syslog to "no". logfile: "" - - # Log to syslog(3) if yes. The log facility LOG_DAEMON is used to - # log to, with identity "unbound". If yes, it overrides the logfile. - # use-syslog: yes - - # the pid file. Can be an absolute path outside of chroot/work dir. pidfile: "unbound.pid" - - # file to read root hints from. - # get one from ftp://FTP.INTERNIC.NET/domain/named.cache - # root-hints: "" - - # enable to not answer id.server and hostname.bind queries. - # hide-identity: no - - # enable to not answer version.server and version.bind queries. - # hide-version: no - - # the identity to report. Leave "" or default to return hostname. - # identity: "" - - # the version to report. Leave "" or default to return package version. - # version: "" - - # the target fetch policy. - # series of integers describing the policy per dependency depth. - # The number of values in the list determines the maximum dependency - # depth the recursor will pursue before giving up. Each integer means: - # -1 : fetch all targets opportunistically, - # 0: fetch on demand, - # positive value: fetch that many targets opportunistically. - # Enclose the list of numbers between quotes (""). - # target-fetch-policy: "3 2 1 0 0" - - # Harden against very small EDNS buffer sizes. - # harden-short-bufsize: no - - # Harden against unseemly large queries. - # harden-large-queries: no - - # Harden against out of zone rrsets, to avoid spoofing attempts. - # harden-glue: yes - - # Harden against receiving dnssec-stripped data. If you turn it - # off, failing to validate dnskey data for a trustanchor will - # trigger insecure mode for that zone (like without a trustanchor). - # Default on, which insists on dnssec data for trust-anchored zones. - # harden-dnssec-stripped: yes - - # Harden the referral path by performing additional queries for - # infrastructure data. Validates the replies (if possible). - # Default off, because the lookups burden the server. Experimental - # implementation of draft-wijngaards-dnsext-resolver-side-mitigation. - # harden-referral-path: no - - # Use 0x20-encoded random bits in the query to foil spoof attempts. - # This feature is an experimental implementation of draft dns-0x20. - # use-caps-for-id: no - - # Enforce privacy of these addresses. Strips them away from answers. - # It may cause DNSSEC validation to additionally mark it as bogus. - # Protects against 'DNS Rebinding' (uses browser as network proxy). - # Only 'private-domain' and 'local-data' names are allowed to have - # these private addresses. No default. - # private-address: 10.0.0.0/8 - # private-address: 172.16.0.0/12 - # private-address: 192.168.0.0/16 - # private-address: 192.254.0.0/16 - # private-address: fd00::/8 - # private-address: fe80::/10 - - # Allow the domain (and its subdomains) to contain private addresses. - # local-data statements are allowed to contain private addresses too. - # private-domain: "example.com" - - # If nonzero, unwanted replies are not only reported in statistics, - # but also a running total is kept per thread. If it reaches the - # threshold, a warning is printed and a defensive action is taken, - # the cache is cleared to flush potential poison out of it. - # A suggested value is 10000000, the default is 0 (turned off). - # unwanted-reply-threshold: 0 - - # Do not query the following addresses. No DNS queries are sent there. - # List one address per entry. List classless netblocks with /size, - # do-not-query-address: 127.0.0.1/8 - # do-not-query-address: ::1 - - # if yes, the above default do-not-query-address entries are present. - # if no, localhost can be queried (for testing and debugging). - # do-not-query-localhost: yes - - # module configuration of the server. A string with identifiers - # separated by spaces. "iterator" or "validator iterator" - module-config: "validator python iterator" - - # File with DLV trusted keys. Same format as trust-anchor-file. - # There can be only one DLV configured, it is trusted from root down. - # Download https://secure.isc.org/ops/dlv/dlv.isc.org.key - # dlv-anchor-file: "dlv.isc.org.key" - - # File with trusted keys for validation. Specify more than one file - # with several entries, one file per entry. - # Zone file format, with DS and DNSKEY entries. - # trust-anchor-file: "" - - # Trusted key for validation. DS or DNSKEY. specify the RR on a - # single line, surrounded by "". TTL is ignored. class is IN default. - # (These examples are from August 2007 and may not be valid anymore). - # trust-anchor: "nlnetlabs.nl. DNSKEY 257 3 5 AQPzzTWMz8qSWIQlfRnPckx2BiVmkVN6LPupO3mbz7FhLSnm26n6iG9N Lby97Ji453aWZY3M5/xJBSOS2vWtco2t8C0+xeO1bc/d6ZTy32DHchpW 6rDH1vp86Ll+ha0tmwyy9QP7y2bVw5zSbFCrefk8qCUBgfHm9bHzMG1U BYtEIQ==" - # trust-anchor: "jelte.nlnetlabs.nl. DS 42860 5 1 14D739EB566D2B1A5E216A0BA4D17FA9B038BE4A" - - # File with trusted keys for validation. Specify more than one file - # with several entries, one file per entry. Like trust-anchor-file - # but has a different file format. Format is BIND-9 style format, - # the trusted-keys { name flag proto algo "key"; }; clauses are read. - # trusted-keys-file: "" - - # Override the date for validation with a specific fixed date. - # Do not set this unless you are debugging signature inception - # and expiration. "" or "0" turns the feature off. - # val-override-date: "" - - # The time to live for bogus data, rrsets and messages. This avoids - # some of the revalidation, until the time interval expires. in secs. - # val-bogus-ttl: 60 - - # Should additional section of secure message also be kept clean of - # unsecure data. Useful to shield the users of this validator from - # potential bogus data in the additional section. All unsigned data - # in the additional section is removed from secure messages. - # val-clean-additional: yes - - # Turn permissive mode on to permit bogus messages. Thus, messages - # for which security checks failed will be returned to clients, - # instead of SERVFAIL. It still performs the security checks, which - # result in interesting log files and possibly the AD bit in - # replies if the message is found secure. The default is off. - # val-permissive-mode: no - - # It is possible to configure NSEC3 maximum iteration counts per - # keysize. Keep this table very short, as linear search is done. - # A message with an NSEC3 with larger count is marked insecure. - # List in ascending order the keysize and count values. - # val-nsec3-keysize-iterations: "1024 150 2048 500 4096 2500" - - # the amount of memory to use for the key cache. - # plain value in bytes or you can append k, m or G. default is "4Mb". - # key-cache-size: 4m - - # the number of slabs to use for the key cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # key-cache-slabs: 4 - - # the amount of memory to use for the negative cache (used for DLV). - # plain value in bytes or you can append k, m or G. default is "1Mb". - # neg-cache-size: 1m - - # a number of locally served zones can be configured. - # local-zone: - # local-data: "" - # o deny serves local data (if any), else, drops queries. - # o refuse serves local data (if any), else, replies with error. - # o static serves local data, else, nxdomain or nodata answer. - # o transparent serves local data, else, resolves normally . - # o redirect serves the zone data for any subdomain in the zone. - # o nodefault can be used to normally resolve AS112 zones. - # - # defaults are localhost address, reverse for 127.0.0.1 and ::1 - # and nxdomain for AS112 zones. If you configure one of these zones - # the default content is omitted, or you can omit it with 'nodefault'. - # - # If you configure local-data without specifying local-zone, by - # default a transparent local-zone is created for the data. - # - # You can add locally served data with - # local-zone: "local." static - # local-data: "mycomputer.local. IN A 192.0.2.51" - # local-data: 'mytext.local TXT "content of text record"' - # - # You can override certain queries with - # local-data: "adserver.example.com A 127.0.0.1" - # - # You can redirect a domain to a fixed address with - # (this makes example.com, www.example.com, etc, all go to 192.0.2.3) - # local-zone: "example.com" redirect - # local-data: "example.com A 192.0.2.3" - # - # Shorthand to make PTR records, "IPv4 name" or "IPv6 name". - # You can also add PTR records using local-data directly, but then - # you need to do the reverse notation yourself. - # local-data-ptr: "192.0.2.3 www.example.com" + module-config: "validator python iterator" # Python config section python: - # Script file to load - python-script: "./examples/log.py" - -# Remote control config section. -remote-control: - # Enable remote control with unbound-control(8) here. - # set up the keys and certificates with unbound-control-setup. - # control-enable: no - - # what interfaces are listened to for remote control. - # give 0.0.0.0 and ::0 to listen to all interfaces. - # control-interface: 127.0.0.1 - # control-interface: ::1 - - # port number for remote control operations. - # control-port: 953 - - # unbound server key file. - # server-key-file: "/usr/local/etc/unbound/unbound_server.key" - - # unbound server certificate file. - # server-cert-file: "/usr/local/etc/unbound/unbound_server.pem" - - # unbound-control key file. - # control-key-file: "/usr/local/etc/unbound/unbound_control.key" - - # unbound-control certificate file. - # control-cert-file: "/usr/local/etc/unbound/unbound_control.pem" - -# Stub zones. -# Create entries like below, to make all queries for 'example.com' and -# 'example.org' go to the given list of nameservers. list zero or more -# nameservers by hostname or by ipaddress. If you set stub-prime to yes, -# the list is treated as priming hints (default is no). -# stub-zone: -# name: "example.com" -# stub-addr: 192.0.2.68 -# stub-prime: "no" -# stub-zone: -# name: "example.org" -# stub-host: ns.example.com. - -# Forward zones -# Create entries like below, to make all queries for 'example.com' and -# 'example.org' go to the given list of servers. These servers have to handle -# recursion to other nameservers. List zero or more nameservers by hostname -# or by ipaddress. Use an entry with name "." to forward all queries. -# forward-zone: -# name: "example.com" -# forward-addr: 192.0.2.68 -# forward-addr: 192.0.2.73@5355 # forward to port 5355. -# forward-zone: -# name: "example.org" -# forward-host: fwd.example.com + # Script file to load + python-script: "./examples/log.py" diff --git a/pythonmod/test-resgen.conf b/pythonmod/test-resgen.conf index 352ade176..a0a79e42d 100644 --- a/pythonmod/test-resgen.conf +++ b/pythonmod/test-resgen.conf @@ -1,438 +1,18 @@ -# -# Example configuration file. -# -# See unbound.conf(5) man page. -# -# this is a comment. - -#Use this to include other text into the file. -#include: "otherfile.conf" - -# The server clause sets the main parameters. +# Example configuration file for resgen.py server: - # whitespace is not necessary, but looks cleaner. - - # verbosity number, 0 is least verbose. 1 is default. verbosity: 1 - - # print statistics to the log (for every thread) every N seconds. - # Set to "" or 0 to disable. Default is disabled. - # statistics-interval: 0 - - # enable cumulative statistics, without clearing them after printing. - # statistics-cumulative: no - - # enable extended statistics (query types, answer codes, status) - # printed from unbound-control. default off, because of speed. - # extended-statistics: no - - # number of threads to create. 1 disables threading. - # num-threads: 1 - - # specify the interfaces to answer queries from by ip-address. - # The default is to listen to localhost (127.0.0.1 and ::1). - # specify 0.0.0.0 and ::0 to bind to all available interfaces. - # specify every interface on a new 'interface:' labelled line. - # The listen interfaces are not changed on reload, only on restart. interface: 0.0.0.0 - # interface: 192.0.2.154 - # interface: 2001:DB8::5 - - # enable this feature to copy the source address of queries to reply. - # Socket options are not supported on all platforms. experimental. - # interface-automatic: no - - # port to answer queries from - # port: 53 - - # specify the interfaces to send outgoing queries to authoritative - # server from by ip-address. If none, the default (all) interface - # is used. Specify every interface on a 'outgoing-interface:' line. - # outgoing-interface: 192.0.2.153 - # outgoing-interface: 2001:DB8::5 - # outgoing-interface: 2001:DB8::6 - - # number of ports to allocate per thread, determines the size of the - # port range that can be open simultaneously. - # outgoing-range: 256 - - # permit unbound to use this port number or port range for - # making outgoing queries, using an outgoing interface. - # outgoing-port-permit: 32768 - - # deny unbound the use this of port number or port range for - # making outgoing queries, using an outgoing interface. - # Use this to make sure unbound does not grab a UDP port that some - # other server on this computer needs. The default is to avoid - # IANA-assigned port numbers. - # outgoing-port-avoid: "3200-3208" - - # number of outgoing simultaneous tcp buffers to hold per thread. - # outgoing-num-tcp: 10 - - # number of incoming simultaneous tcp buffers to hold per thread. - # incoming-num-tcp: 10 - - # buffer size for handling DNS data. No messages larger than this - # size can be sent or received, by UDP or TCP. In bytes. - # msg-buffer-size: 65552 - - # the amount of memory to use for the message cache. - # plain value in bytes or you can append k, m or G. default is "4Mb". - # msg-cache-size: 4m - - # the number of slabs to use for the message cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # msg-cache-slabs: 4 - - # the number of queries that a thread gets to service. - # num-queries-per-thread: 1024 - - # if very busy, 50% queries run to completion, 50% get timeout in msec - # jostle-timeout: 200 - - # the amount of memory to use for the RRset cache. - # plain value in bytes or you can append k, m or G. default is "4Mb". - # rrset-cache-size: 4m - - # the number of slabs to use for the RRset cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # rrset-cache-slabs: 4 - - # the time to live (TTL) value cap for RRsets and messages in the - # cache. Items are not cached for longer. In seconds. - # cache-max-ttl: 86400 - - # the time to live (TTL) value for cached roundtrip times and - # EDNS version information for hosts. In seconds. - # infra-host-ttl: 900 - - # the time to live (TTL) value for cached lame delegations. In sec. - # infra-lame-ttl: 900 - - # the number of slabs to use for the Infrastructure cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # infra-cache-slabs: 4 - - # the maximum number of hosts that are cached (roundtrip times, EDNS). - # infra-cache-numhosts: 10000 - - # the maximum size of the lame zones cached per host. in bytes. - # infra-cache-lame-size: 10k - - # Enable IPv4, "yes" or "no". - # do-ip4: yes - - # Enable IPv6, "yes" or "no". - # do-ip6: yes - - # Enable UDP, "yes" or "no". - # do-udp: yes - - # Enable TCP, "yes" or "no". - # do-tcp: yes - - # Detach from the terminal, run in background, "yes" or "no". do-daemonize: no - - # control which clients are allowed to make (recursive) queries - # to this server. Specify classless netblocks with /size and action. - # By default everything is refused, except for localhost. - # Choose deny (drop message), refuse (polite error reply), - # allow (recursive ok), allow_snoop (recursive and nonrecursive ok) access-control: 0.0.0.0/0 allow - # access-control: 127.0.0.0/8 allow - # access-control: ::0/0 refuse - # access-control: ::1 allow - # access-control: ::ffff:127.0.0.1 allow - - # if given, a chroot(2) is done to the given directory. - # i.e. you can chroot to the working directory, for example, - # for extra security, but make sure all files are in that directory. - # - # If chroot is enabled, you should pass the configfile (from the - # commandline) as a full path from the original root. After the - # chroot has been performed the now defunct portion of the config - # file path is removed to be able to reread the config after a reload. - # - # All other file paths (working dir, logfile, roothints, and - # key files) can be specified in several ways: - # o as an absolute path relative to the new root. - # o as a relative path to the working directory. - # o as an absolute path relative to the original root. - # In the last case the path is adjusted to remove the unused portion. - # - # The pid file can be absolute and outside of the chroot, it is - # written just prior to performing the chroot and dropping permissions. - # - # Additionally, unbound may need to access /dev/random (for entropy). - # How to do this is specific to your OS. - # - # If you give "" no chroot is performed. The path must not end in a /. - chroot: "" - - # if given, user privileges are dropped (after binding port), - # and the given username is assumed. Default is user "unbound". - # If you give "" no privileges are dropped. + chroot: "" username: "" - - # the working directory. The relative files in this config are - # relative to this directory. If you give "" the working directory - # is not changed. directory: "" - - # the log file, "" means log to stderr. - # Use of this option sets use-syslog to "no". logfile: "" - - # Log to syslog(3) if yes. The log facility LOG_DAEMON is used to - # log to, with identity "unbound". If yes, it overrides the logfile. - # use-syslog: yes - - # the pid file. Can be an absolute path outside of chroot/work dir. pidfile: "unbound.pid" - - # file to read root hints from. - # get one from ftp://FTP.INTERNIC.NET/domain/named.cache - # root-hints: "" - - # enable to not answer id.server and hostname.bind queries. - # hide-identity: no - - # enable to not answer version.server and version.bind queries. - # hide-version: no - - # the identity to report. Leave "" or default to return hostname. - # identity: "" - - # the version to report. Leave "" or default to return package version. - # version: "" - - # the target fetch policy. - # series of integers describing the policy per dependency depth. - # The number of values in the list determines the maximum dependency - # depth the recursor will pursue before giving up. Each integer means: - # -1 : fetch all targets opportunistically, - # 0: fetch on demand, - # positive value: fetch that many targets opportunistically. - # Enclose the list of numbers between quotes (""). - # target-fetch-policy: "3 2 1 0 0" - - # Harden against very small EDNS buffer sizes. - # harden-short-bufsize: no - - # Harden against unseemly large queries. - # harden-large-queries: no - - # Harden against out of zone rrsets, to avoid spoofing attempts. - # harden-glue: yes - - # Harden against receiving dnssec-stripped data. If you turn it - # off, failing to validate dnskey data for a trustanchor will - # trigger insecure mode for that zone (like without a trustanchor). - # Default on, which insists on dnssec data for trust-anchored zones. - # harden-dnssec-stripped: yes - - # Harden the referral path by performing additional queries for - # infrastructure data. Validates the replies (if possible). - # Default off, because the lookups burden the server. Experimental - # implementation of draft-wijngaards-dnsext-resolver-side-mitigation. - # harden-referral-path: no - - # Use 0x20-encoded random bits in the query to foil spoof attempts. - # This feature is an experimental implementation of draft dns-0x20. - # use-caps-for-id: no - - # Enforce privacy of these addresses. Strips them away from answers. - # It may cause DNSSEC validation to additionally mark it as bogus. - # Protects against 'DNS Rebinding' (uses browser as network proxy). - # Only 'private-domain' and 'local-data' names are allowed to have - # these private addresses. No default. - # private-address: 10.0.0.0/8 - # private-address: 172.16.0.0/12 - # private-address: 192.168.0.0/16 - # private-address: 192.254.0.0/16 - # private-address: fd00::/8 - # private-address: fe80::/10 - - # Allow the domain (and its subdomains) to contain private addresses. - # local-data statements are allowed to contain private addresses too. - # private-domain: "example.com" - - # If nonzero, unwanted replies are not only reported in statistics, - # but also a running total is kept per thread. If it reaches the - # threshold, a warning is printed and a defensive action is taken, - # the cache is cleared to flush potential poison out of it. - # A suggested value is 10000000, the default is 0 (turned off). - # unwanted-reply-threshold: 0 - - # Do not query the following addresses. No DNS queries are sent there. - # List one address per entry. List classless netblocks with /size, - # do-not-query-address: 127.0.0.1/8 - # do-not-query-address: ::1 - - # if yes, the above default do-not-query-address entries are present. - # if no, localhost can be queried (for testing and debugging). - # do-not-query-localhost: yes - - # module configuration of the server. A string with identifiers - # separated by spaces. "iterator" or "validator iterator" - module-config: "validator python iterator" - - # File with DLV trusted keys. Same format as trust-anchor-file. - # There can be only one DLV configured, it is trusted from root down. - # Download https://secure.isc.org/ops/dlv/dlv.isc.org.key - # dlv-anchor-file: "dlv.isc.org.key" - - # File with trusted keys for validation. Specify more than one file - # with several entries, one file per entry. - # Zone file format, with DS and DNSKEY entries. - # trust-anchor-file: "" - - # Trusted key for validation. DS or DNSKEY. specify the RR on a - # single line, surrounded by "". TTL is ignored. class is IN default. - # (These examples are from August 2007 and may not be valid anymore). - # trust-anchor: "nlnetlabs.nl. DNSKEY 257 3 5 AQPzzTWMz8qSWIQlfRnPckx2BiVmkVN6LPupO3mbz7FhLSnm26n6iG9N Lby97Ji453aWZY3M5/xJBSOS2vWtco2t8C0+xeO1bc/d6ZTy32DHchpW 6rDH1vp86Ll+ha0tmwyy9QP7y2bVw5zSbFCrefk8qCUBgfHm9bHzMG1U BYtEIQ==" - # trust-anchor: "jelte.nlnetlabs.nl. DS 42860 5 1 14D739EB566D2B1A5E216A0BA4D17FA9B038BE4A" - - # File with trusted keys for validation. Specify more than one file - # with several entries, one file per entry. Like trust-anchor-file - # but has a different file format. Format is BIND-9 style format, - # the trusted-keys { name flag proto algo "key"; }; clauses are read. - # trusted-keys-file: "" - - # Override the date for validation with a specific fixed date. - # Do not set this unless you are debugging signature inception - # and expiration. "" or "0" turns the feature off. - # val-override-date: "" - - # The time to live for bogus data, rrsets and messages. This avoids - # some of the revalidation, until the time interval expires. in secs. - # val-bogus-ttl: 60 - - # Should additional section of secure message also be kept clean of - # unsecure data. Useful to shield the users of this validator from - # potential bogus data in the additional section. All unsigned data - # in the additional section is removed from secure messages. - # val-clean-additional: yes - - # Turn permissive mode on to permit bogus messages. Thus, messages - # for which security checks failed will be returned to clients, - # instead of SERVFAIL. It still performs the security checks, which - # result in interesting log files and possibly the AD bit in - # replies if the message is found secure. The default is off. - # val-permissive-mode: no - - # It is possible to configure NSEC3 maximum iteration counts per - # keysize. Keep this table very short, as linear search is done. - # A message with an NSEC3 with larger count is marked insecure. - # List in ascending order the keysize and count values. - # val-nsec3-keysize-iterations: "1024 150 2048 500 4096 2500" - - # the amount of memory to use for the key cache. - # plain value in bytes or you can append k, m or G. default is "4Mb". - # key-cache-size: 4m - - # the number of slabs to use for the key cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # key-cache-slabs: 4 - - # the amount of memory to use for the negative cache (used for DLV). - # plain value in bytes or you can append k, m or G. default is "1Mb". - # neg-cache-size: 1m - - # a number of locally served zones can be configured. - # local-zone: - # local-data: "" - # o deny serves local data (if any), else, drops queries. - # o refuse serves local data (if any), else, replies with error. - # o static serves local data, else, nxdomain or nodata answer. - # o transparent serves local data, else, resolves normally . - # o redirect serves the zone data for any subdomain in the zone. - # o nodefault can be used to normally resolve AS112 zones. - # - # defaults are localhost address, reverse for 127.0.0.1 and ::1 - # and nxdomain for AS112 zones. If you configure one of these zones - # the default content is omitted, or you can omit it with 'nodefault'. - # - # If you configure local-data without specifying local-zone, by - # default a transparent local-zone is created for the data. - # - # You can add locally served data with - # local-zone: "local." static - # local-data: "mycomputer.local. IN A 192.0.2.51" - # local-data: 'mytext.local TXT "content of text record"' - # - # You can override certain queries with - # local-data: "adserver.example.com A 127.0.0.1" - # - # You can redirect a domain to a fixed address with - # (this makes example.com, www.example.com, etc, all go to 192.0.2.3) - # local-zone: "example.com" redirect - # local-data: "example.com A 192.0.2.3" - # - # Shorthand to make PTR records, "IPv4 name" or "IPv6 name". - # You can also add PTR records using local-data directly, but then - # you need to do the reverse notation yourself. - # local-data-ptr: "192.0.2.3 www.example.com" + module-config: "validator python iterator" # Python config section python: - # Script file to load - python-script: "./examples/resgen.py" - -# Remote control config section. -remote-control: - # Enable remote control with unbound-control(8) here. - # set up the keys and certificates with unbound-control-setup. - # control-enable: no - - # what interfaces are listened to for remote control. - # give 0.0.0.0 and ::0 to listen to all interfaces. - # control-interface: 127.0.0.1 - # control-interface: ::1 - - # port number for remote control operations. - # control-port: 953 - - # unbound server key file. - # server-key-file: "/usr/local/etc/unbound/unbound_server.key" - - # unbound server certificate file. - # server-cert-file: "/usr/local/etc/unbound/unbound_server.pem" - - # unbound-control key file. - # control-key-file: "/usr/local/etc/unbound/unbound_control.key" - - # unbound-control certificate file. - # control-cert-file: "/usr/local/etc/unbound/unbound_control.pem" - -# Stub zones. -# Create entries like below, to make all queries for 'example.com' and -# 'example.org' go to the given list of nameservers. list zero or more -# nameservers by hostname or by ipaddress. If you set stub-prime to yes, -# the list is treated as priming hints (default is no). -# stub-zone: -# name: "example.com" -# stub-addr: 192.0.2.68 -# stub-prime: "no" -# stub-zone: -# name: "example.org" -# stub-host: ns.example.com. + # Script file to load + python-script: "./examples/resgen.py" -# Forward zones -# Create entries like below, to make all queries for 'example.com' and -# 'example.org' go to the given list of servers. These servers have to handle -# recursion to other nameservers. List zero or more nameservers by hostname -# or by ipaddress. Use an entry with name "." to forward all queries. -# forward-zone: -# name: "example.com" -# forward-addr: 192.0.2.68 -# forward-addr: 192.0.2.73@5355 # forward to port 5355. -# forward-zone: -# name: "example.org" -# forward-host: fwd.example.com diff --git a/pythonmod/test-resmod.conf b/pythonmod/test-resmod.conf index e716478c3..8de5fd257 100644 --- a/pythonmod/test-resmod.conf +++ b/pythonmod/test-resmod.conf @@ -1,439 +1,19 @@ -# -# Example configuration file. -# -# See unbound.conf(5) man page. -# -# this is a comment. - -#Use this to include other text into the file. -#include: "otherfile.conf" - -# The server clause sets the main parameters. +# Example configuration file for resmod.py server: - # whitespace is not necessary, but looks cleaner. - - # verbosity number, 0 is least verbose. 1 is default. verbosity: 1 - - # print statistics to the log (for every thread) every N seconds. - # Set to "" or 0 to disable. Default is disabled. - # statistics-interval: 0 - - # enable cumulative statistics, without clearing them after printing. - # statistics-cumulative: no - - # enable extended statistics (query types, answer codes, status) - # printed from unbound-control. default off, because of speed. - # extended-statistics: no - - # number of threads to create. 1 disables threading. - # num-threads: 1 - - # specify the interfaces to answer queries from by ip-address. - # The default is to listen to localhost (127.0.0.1 and ::1). - # specify 0.0.0.0 and ::0 to bind to all available interfaces. - # specify every interface on a new 'interface:' labelled line. - # The listen interfaces are not changed on reload, only on restart. interface: 0.0.0.0 - # interface: 192.0.2.154 - # interface: 2001:DB8::5 - - # enable this feature to copy the source address of queries to reply. - # Socket options are not supported on all platforms. experimental. - # interface-automatic: no - - # port to answer queries from - # port: 53 - - # specify the interfaces to send outgoing queries to authoritative - # server from by ip-address. If none, the default (all) interface - # is used. Specify every interface on a 'outgoing-interface:' line. - # outgoing-interface: 192.0.2.153 - # outgoing-interface: 2001:DB8::5 - # outgoing-interface: 2001:DB8::6 - - # number of ports to allocate per thread, determines the size of the - # port range that can be open simultaneously. - # outgoing-range: 256 - - # permit unbound to use this port number or port range for - # making outgoing queries, using an outgoing interface. - # outgoing-port-permit: 32768 - - # deny unbound the use this of port number or port range for - # making outgoing queries, using an outgoing interface. - # Use this to make sure unbound does not grab a UDP port that some - # other server on this computer needs. The default is to avoid - # IANA-assigned port numbers. - # outgoing-port-avoid: "3200-3208" - - # number of outgoing simultaneous tcp buffers to hold per thread. - # outgoing-num-tcp: 10 - - # number of incoming simultaneous tcp buffers to hold per thread. - # incoming-num-tcp: 10 - - # buffer size for handling DNS data. No messages larger than this - # size can be sent or received, by UDP or TCP. In bytes. - # msg-buffer-size: 65552 - - # the amount of memory to use for the message cache. - # plain value in bytes or you can append k, m or G. default is "4Mb". - # msg-cache-size: 4m - - # the number of slabs to use for the message cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # msg-cache-slabs: 4 - - # the number of queries that a thread gets to service. - # num-queries-per-thread: 1024 - - # if very busy, 50% queries run to completion, 50% get timeout in msec - # jostle-timeout: 200 - - # the amount of memory to use for the RRset cache. - # plain value in bytes or you can append k, m or G. default is "4Mb". - # rrset-cache-size: 4m - - # the number of slabs to use for the RRset cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # rrset-cache-slabs: 4 - - # the time to live (TTL) value cap for RRsets and messages in the - # cache. Items are not cached for longer. In seconds. - # cache-max-ttl: 86400 - - # the time to live (TTL) value for cached roundtrip times and - # EDNS version information for hosts. In seconds. - # infra-host-ttl: 900 - - # the time to live (TTL) value for cached lame delegations. In sec. - # infra-lame-ttl: 900 - - # the number of slabs to use for the Infrastructure cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # infra-cache-slabs: 4 - - # the maximum number of hosts that are cached (roundtrip times, EDNS). - # infra-cache-numhosts: 10000 - - # the maximum size of the lame zones cached per host. in bytes. - # infra-cache-lame-size: 10k - - # Enable IPv4, "yes" or "no". - # do-ip4: yes - - # Enable IPv6, "yes" or "no". - # do-ip6: yes - - # Enable UDP, "yes" or "no". - # do-udp: yes - - # Enable TCP, "yes" or "no". - # do-tcp: yes - - # Detach from the terminal, run in background, "yes" or "no". do-daemonize: no - - # control which clients are allowed to make (recursive) queries - # to this server. Specify classless netblocks with /size and action. - # By default everything is refused, except for localhost. - # Choose deny (drop message), refuse (polite error reply), - # allow (recursive ok), allow_snoop (recursive and nonrecursive ok) access-control: 0.0.0.0/0 allow - # access-control: 127.0.0.0/8 allow - # access-control: ::0/0 refuse - # access-control: ::1 allow - # access-control: ::ffff:127.0.0.1 allow - - # if given, a chroot(2) is done to the given directory. - # i.e. you can chroot to the working directory, for example, - # for extra security, but make sure all files are in that directory. - # - # If chroot is enabled, you should pass the configfile (from the - # commandline) as a full path from the original root. After the - # chroot has been performed the now defunct portion of the config - # file path is removed to be able to reread the config after a reload. - # - # All other file paths (working dir, logfile, roothints, and - # key files) can be specified in several ways: - # o as an absolute path relative to the new root. - # o as a relative path to the working directory. - # o as an absolute path relative to the original root. - # In the last case the path is adjusted to remove the unused portion. - # - # The pid file can be absolute and outside of the chroot, it is - # written just prior to performing the chroot and dropping permissions. - # - # Additionally, unbound may need to access /dev/random (for entropy). - # How to do this is specific to your OS. - # - # If you give "" no chroot is performed. The path must not end in a /. - chroot: "" - - # if given, user privileges are dropped (after binding port), - # and the given username is assumed. Default is user "unbound". - # If you give "" no privileges are dropped. + chroot: "" username: "" - - # the working directory. The relative files in this config are - # relative to this directory. If you give "" the working directory - # is not changed. directory: "" - - # the log file, "" means log to stderr. - # Use of this option sets use-syslog to "no". logfile: "" - - # Log to syslog(3) if yes. The log facility LOG_DAEMON is used to - # log to, with identity "unbound". If yes, it overrides the logfile. - # use-syslog: yes - - # the pid file. Can be an absolute path outside of chroot/work dir. pidfile: "unbound.pid" - - # file to read root hints from. - # get one from ftp://FTP.INTERNIC.NET/domain/named.cache - # root-hints: "" - - # enable to not answer id.server and hostname.bind queries. - # hide-identity: no - - # enable to not answer version.server and version.bind queries. - # hide-version: no - - # the identity to report. Leave "" or default to return hostname. - # identity: "" - - # the version to report. Leave "" or default to return package version. - # version: "" - - # the target fetch policy. - # series of integers describing the policy per dependency depth. - # The number of values in the list determines the maximum dependency - # depth the recursor will pursue before giving up. Each integer means: - # -1 : fetch all targets opportunistically, - # 0: fetch on demand, - # positive value: fetch that many targets opportunistically. - # Enclose the list of numbers between quotes (""). - # target-fetch-policy: "3 2 1 0 0" - - # Harden against very small EDNS buffer sizes. - # harden-short-bufsize: no - - # Harden against unseemly large queries. - # harden-large-queries: no - - # Harden against out of zone rrsets, to avoid spoofing attempts. - # harden-glue: yes - - # Harden against receiving dnssec-stripped data. If you turn it - # off, failing to validate dnskey data for a trustanchor will - # trigger insecure mode for that zone (like without a trustanchor). - # Default on, which insists on dnssec data for trust-anchored zones. - # harden-dnssec-stripped: yes - - # Harden the referral path by performing additional queries for - # infrastructure data. Validates the replies (if possible). - # Default off, because the lookups burden the server. Experimental - # implementation of draft-wijngaards-dnsext-resolver-side-mitigation. - # harden-referral-path: no - - # Use 0x20-encoded random bits in the query to foil spoof attempts. - # This feature is an experimental implementation of draft dns-0x20. - # use-caps-for-id: no - - # Enforce privacy of these addresses. Strips them away from answers. - # It may cause DNSSEC validation to additionally mark it as bogus. - # Protects against 'DNS Rebinding' (uses browser as network proxy). - # Only 'private-domain' and 'local-data' names are allowed to have - # these private addresses. No default. - # private-address: 10.0.0.0/8 - # private-address: 172.16.0.0/12 - # private-address: 192.168.0.0/16 - # private-address: 192.254.0.0/16 - # private-address: fd00::/8 - # private-address: fe80::/10 - - # Allow the domain (and its subdomains) to contain private addresses. - # local-data statements are allowed to contain private addresses too. - # private-domain: "example.com" - - # If nonzero, unwanted replies are not only reported in statistics, - # but also a running total is kept per thread. If it reaches the - # threshold, a warning is printed and a defensive action is taken, - # the cache is cleared to flush potential poison out of it. - # A suggested value is 10000000, the default is 0 (turned off). - # unwanted-reply-threshold: 0 - - # Do not query the following addresses. No DNS queries are sent there. - # List one address per entry. List classless netblocks with /size, - # do-not-query-address: 127.0.0.1/8 - # do-not-query-address: ::1 - - # if yes, the above default do-not-query-address entries are present. - # if no, localhost can be queried (for testing and debugging). - # do-not-query-localhost: yes - - # module configuration of the server. A string with identifiers - # separated by spaces. "iterator" or "validator iterator" - #module-config: "python iterator" - module-config: "validator python iterator" - - # File with DLV trusted keys. Same format as trust-anchor-file. - # There can be only one DLV configured, it is trusted from root down. - # Download https://secure.isc.org/ops/dlv/dlv.isc.org.key - # dlv-anchor-file: "dlv.isc.org.key" - - # File with trusted keys for validation. Specify more than one file - # with several entries, one file per entry. - # Zone file format, with DS and DNSKEY entries. - # trust-anchor-file: "" - - # Trusted key for validation. DS or DNSKEY. specify the RR on a - # single line, surrounded by "". TTL is ignored. class is IN default. - # (These examples are from August 2007 and may not be valid anymore). - # trust-anchor: "nlnetlabs.nl. DNSKEY 257 3 5 AQPzzTWMz8qSWIQlfRnPckx2BiVmkVN6LPupO3mbz7FhLSnm26n6iG9N Lby97Ji453aWZY3M5/xJBSOS2vWtco2t8C0+xeO1bc/d6ZTy32DHchpW 6rDH1vp86Ll+ha0tmwyy9QP7y2bVw5zSbFCrefk8qCUBgfHm9bHzMG1U BYtEIQ==" - # trust-anchor: "jelte.nlnetlabs.nl. DS 42860 5 1 14D739EB566D2B1A5E216A0BA4D17FA9B038BE4A" - - # File with trusted keys for validation. Specify more than one file - # with several entries, one file per entry. Like trust-anchor-file - # but has a different file format. Format is BIND-9 style format, - # the trusted-keys { name flag proto algo "key"; }; clauses are read. - # trusted-keys-file: "" - - # Override the date for validation with a specific fixed date. - # Do not set this unless you are debugging signature inception - # and expiration. "" or "0" turns the feature off. - # val-override-date: "" - - # The time to live for bogus data, rrsets and messages. This avoids - # some of the revalidation, until the time interval expires. in secs. - # val-bogus-ttl: 60 - - # Should additional section of secure message also be kept clean of - # unsecure data. Useful to shield the users of this validator from - # potential bogus data in the additional section. All unsigned data - # in the additional section is removed from secure messages. - # val-clean-additional: yes - - # Turn permissive mode on to permit bogus messages. Thus, messages - # for which security checks failed will be returned to clients, - # instead of SERVFAIL. It still performs the security checks, which - # result in interesting log files and possibly the AD bit in - # replies if the message is found secure. The default is off. - # val-permissive-mode: no - - # It is possible to configure NSEC3 maximum iteration counts per - # keysize. Keep this table very short, as linear search is done. - # A message with an NSEC3 with larger count is marked insecure. - # List in ascending order the keysize and count values. - # val-nsec3-keysize-iterations: "1024 150 2048 500 4096 2500" - - # the amount of memory to use for the key cache. - # plain value in bytes or you can append k, m or G. default is "4Mb". - # key-cache-size: 4m - - # the number of slabs to use for the key cache. - # the number of slabs must be a power of 2. - # more slabs reduce lock contention, but fragment memory usage. - # key-cache-slabs: 4 - - # the amount of memory to use for the negative cache (used for DLV). - # plain value in bytes or you can append k, m or G. default is "1Mb". - # neg-cache-size: 1m - - # a number of locally served zones can be configured. - # local-zone: - # local-data: "" - # o deny serves local data (if any), else, drops queries. - # o refuse serves local data (if any), else, replies with error. - # o static serves local data, else, nxdomain or nodata answer. - # o transparent serves local data, else, resolves normally . - # o redirect serves the zone data for any subdomain in the zone. - # o nodefault can be used to normally resolve AS112 zones. - # - # defaults are localhost address, reverse for 127.0.0.1 and ::1 - # and nxdomain for AS112 zones. If you configure one of these zones - # the default content is omitted, or you can omit it with 'nodefault'. - # - # If you configure local-data without specifying local-zone, by - # default a transparent local-zone is created for the data. - # - # You can add locally served data with - # local-zone: "local." static - # local-data: "mycomputer.local. IN A 192.0.2.51" - # local-data: 'mytext.local TXT "content of text record"' - # - # You can override certain queries with - # local-data: "adserver.example.com A 127.0.0.1" - # - # You can redirect a domain to a fixed address with - # (this makes example.com, www.example.com, etc, all go to 192.0.2.3) - # local-zone: "example.com" redirect - # local-data: "example.com A 192.0.2.3" - # - # Shorthand to make PTR records, "IPv4 name" or "IPv6 name". - # You can also add PTR records using local-data directly, but then - # you need to do the reverse notation yourself. - # local-data-ptr: "192.0.2.3 www.example.com" + #module-config: "python iterator" + module-config: "validator python iterator" # Python config section python: - # Script file to load - python-script: "./examples/resmod.py" - -# Remote control config section. -remote-control: - # Enable remote control with unbound-control(8) here. - # set up the keys and certificates with unbound-control-setup. - # control-enable: no - - # what interfaces are listened to for remote control. - # give 0.0.0.0 and ::0 to listen to all interfaces. - # control-interface: 127.0.0.1 - # control-interface: ::1 - - # port number for remote control operations. - # control-port: 953 - - # unbound server key file. - # server-key-file: "/usr/local/etc/unbound/unbound_server.key" - - # unbound server certificate file. - # server-cert-file: "/usr/local/etc/unbound/unbound_server.pem" - - # unbound-control key file. - # control-key-file: "/usr/local/etc/unbound/unbound_control.key" - - # unbound-control certificate file. - # control-cert-file: "/usr/local/etc/unbound/unbound_control.pem" - -# Stub zones. -# Create entries like below, to make all queries for 'example.com' and -# 'example.org' go to the given list of nameservers. list zero or more -# nameservers by hostname or by ipaddress. If you set stub-prime to yes, -# the list is treated as priming hints (default is no). -# stub-zone: -# name: "example.com" -# stub-addr: 192.0.2.68 -# stub-prime: "no" -# stub-zone: -# name: "example.org" -# stub-host: ns.example.com. + # Script file to load + python-script: "./examples/resmod.py" -# Forward zones -# Create entries like below, to make all queries for 'example.com' and -# 'example.org' go to the given list of servers. These servers have to handle -# recursion to other nameservers. List zero or more nameservers by hostname -# or by ipaddress. Use an entry with name "." to forward all queries. -# forward-zone: -# name: "example.com" -# forward-addr: 192.0.2.68 -# forward-addr: 192.0.2.73@5355 # forward to port 5355. -# forward-zone: -# name: "example.org" -# forward-host: fwd.example.com