From: Troy Kisky <troy.kisky@boundarydevices.com>
Date: Tue, 17 Dec 2013 01:12:56 +0000 (-0700)
Subject: ARM: dts: imx6qdl-sabrelite: move phy reset to pinctrl_enet
X-Git-Tag: v3.15-rc1~77^2~40^2~32
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=f3b0ea6118b43ee6fa97fae7c3a5a63559130140;p=thirdparty%2Fkernel%2Flinux.git

ARM: dts: imx6qdl-sabrelite: move phy reset to pinctrl_enet

This patch moves pin EIM_D23 (phy reset) from pinctrl_hog to pinctrl_enet.
It also explicitly sets the pad to 0x000b0.

Before this patch, it has the value 0x1b0b0 if using mainline u-boot.
So this patch also removes hysteresis and a 100K pullup since the pad
is always an output.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---

diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 9b78cf8285840..bbc05830c4319 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -114,7 +114,6 @@
 	imx6q-sabrelite {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x80000000
 				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x80000000
 			>;
 		};
@@ -155,6 +154,8 @@
 				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
 				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+				/* Phy reset */
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x000b0
 			>;
 		};