From: Frank Wunderlich <frank-w@public-files.de>
Date: Tue, 17 Dec 2024 09:12:23 +0000 (+0100)
Subject: arm64: dts: mediatek: mt7988: Add t-phy for ssusb1
X-Git-Tag: v6.14-rc1~103^2~15^2~25
X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=f693e6ba55ae98eeb226d0bef0fd37fcae4435a3;p=thirdparty%2Flinux.git

arm64: dts: mediatek: mt7988: Add t-phy for ssusb1

USB controller needs phys for working properly.
On mt7988 ssusb0 uses a xs-phy, ssusb uses t-phy.
For now add the t-phy for ssusb1. We can reuse the mt7986 compatible
here.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-10-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---

diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index f8b01f3fff327..209d170bce7f6 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -349,6 +349,8 @@
 				 <&infracfg CLK_INFRA_133M_USB_HCK_CK_P1>,
 				 <&infracfg CLK_INFRA_USB_XHCI_CK_P1>;
 			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+			phys = <&tphyu2port0 PHY_TYPE_USB2>,
+			       <&tphyu3port0 PHY_TYPE_USB3>;
 			status = "disabled";
 		};
 
@@ -371,6 +373,29 @@
 			status = "disabled";
 		};
 
+		t-phy@11c50000 {
+			compatible = "mediatek,mt7986-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			tphyu2port0: usb-phy@11c50000 {
+				reg = <0 0x11c50000 0 0x700>;
+				clocks = <&infracfg CLK_INFRA_USB_UTMI_CK_P1>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			tphyu3port0: usb-phy@11c50700 {
+				reg = <0 0x11c50700 0 0x900>;
+				clocks = <&infracfg CLK_INFRA_USB_PIPE_CK_P1>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
 		clock-controller@11f40000 {
 			compatible = "mediatek,mt7988-xfi-pll";
 			reg = <0 0x11f40000 0 0x1000>;