From: Yao Zi Date: Wed, 13 Aug 2025 10:09:25 +0000 (+0000) Subject: clk: thead: th1520-ap: Mark drivers as DM_FLAG_PRE_RELOC X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=fbcf53680be59fd8144f865f8cfd840319cb5c0d;p=thirdparty%2Fu-boot.git clk: thead: th1520-ap: Mark drivers as DM_FLAG_PRE_RELOC It's common that UARTs are bound and probed before U-Boot relocation, in which case the clocks of UART and UART's pincontroller must be registered first. Let's apply DM_FLAG_PRE_RELOC to the driver, allowing it to bind before relocation. Signed-off-by: Yao Zi Reviewed-by: Leo Yu-Chi Liang --- diff --git a/drivers/clk/thead/clk-th1520-ap.c b/drivers/clk/thead/clk-th1520-ap.c index 822cf0809d5..6899e1b595a 100644 --- a/drivers/clk/thead/clk-th1520-ap.c +++ b/drivers/clk/thead/clk-th1520-ap.c @@ -235,6 +235,7 @@ U_BOOT_DRIVER(th1520_clk_div) = { .name = "th1520_clk_div", .id = UCLASS_CLK, .ops = &ccu_div_ops, + .flags = DM_FLAG_PRE_RELOC, }; static unsigned long th1520_pll_vco_recalc_rate(struct clk *clk, @@ -302,6 +303,7 @@ U_BOOT_DRIVER(th1520_clk_pll) = { .name = "th1520_clk_pll", .id = UCLASS_CLK, .ops = &clk_pll_ops, + .flags = DM_FLAG_PRE_RELOC, }; static struct ccu_pll cpu_pll0_clk = { @@ -1030,4 +1032,5 @@ U_BOOT_DRIVER(th1520_clk) = { .of_match = th1520_clk_match, .probe = th1520_clk_probe, .ops = &th1520_clk_ops, + .flags = DM_FLAG_PRE_RELOC, };