From: Ari Kurniawan Date: Mon, 15 Sep 2025 13:13:29 +0000 (+0700) Subject: mediatek: filogic: add support for Totolink X6000R X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=refs%2Fpull%2F20035%2Fhead;p=thirdparty%2Fopenwrt.git mediatek: filogic: add support for Totolink X6000R Specification : - SOC : Mediatek MT7981B (1.3GHz) - RAM : 256MB - Flash : 16MB SPI NOR - Ports : 4 LAN (1G) & 1 WAN (1G) - WIFI : MediaTek dual-band WiFi 6 - 2.4 GHz : b/g/n/ax, MIMO 2x2 - 5 GHz : a/n/ac/ax, MIMO 2x2 - Buttons : Reset & WPS/Mesh - LEDS : WAN (Green), Status (Red & Blue) - Power : 12V1A Install via OEM web ui: Upload the sysupgrade image to firmware upgrade page on OEM web ui Install via recovery / revert to stock firmware: 1. Unplug from power 2. Download the Sysupgrade (for openwrt installation) or OEM Factory image (for revert to stock firmware) 3. Set your computer ethernet IP to 192.168.1.X, subnet 255.255.255.0 (X=your chosen ip number ranging from 2-254) 4. Press and hold reset button while turn on / plug power adapter to the router. Wait untill ALL LAN green LED turn on, then release the reset button. 5. Plug the LAN cable from your computer into LAN 1 port then open web browser, and type in the address column : 192.168.1.1 6. Upload the sysupgrade / oem factory image 7. Wait until the router finished flashing (the router will reboot) 8. Set ethernet ip to dhcp 9. Open 192.168.1.1 (for openwrt install) / 192.168.0.1 (for OEM firmware) Signed-off-by: Ari Kurniawan Link: https://github.com/openwrt/openwrt/pull/20035 Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/mediatek/dts/mt7981b-totolink-x6000r.dts b/target/linux/mediatek/dts/mt7981b-totolink-x6000r.dts new file mode 100644 index 00000000000..aebb3b9244f --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-totolink-x6000r.dts @@ -0,0 +1,254 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include + +#include "mt7981b.dtsi" + +/ { + model = "TOTOLINK X6000R"; + compatible = "totolink,x6000r", "mediatek,mt7981"; + + aliases { + label-mac-device = &gmac0; + led-boot = &led_status; + led-failsafe = &led_status_red; + led-running = &led_status; + led-upgrade = &led_status; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + reg = <0 0x40000000 0 0x10000000>; + device_type = "memory"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "wps"; + linux,code = ; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_WAN; + color = ; + gpios = <&pio 8 GPIO_ACTIVE_LOW>; + }; + + led_status_red: led-1 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 13 GPIO_ACTIVE_LOW>; + }; + + led_status: led-2 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 15 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins &gbe_led0_pins &gbe_led1_pins>; + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + nvmem-cells = <&macaddr_factory_14>; + nvmem-cell-names = "mac-address"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&int_gbe_phy>; + label = "wan"; + + nvmem-cells = <&macaddr_factory_1a>; + nvmem-cell-names = "mac-address"; + }; +}; + +&mdio_bus { + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; + }; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_flash_pins>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "jedec,spi-nor"; + reg = <0>; + + spi-max-frequency = <52000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "BL2"; + reg = <0x00000 0x40000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "Factory"; + reg = <0x50000 0xb0000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + + macaddr_factory_14: macaddr@14 { + reg = <0x14 0x6>; + }; + + macaddr_factory_1a: macaddr@1a { + reg = <0x1a 0x6>; + }; + }; + }; + + partition@100000 { + label = "FIP"; + reg = <0x100000 0x80000>; + read-only; + }; + + partition@180000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x180000 0xe00000>; + }; + }; + }; +}; + +&pio { + spi2_flash_pins: spi2-pins { + mux { + function = "spi"; + groups = "spi2", "spi2_wp_hold"; + }; + + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; +}; + +&wifi { + status = "okay"; + nvmem-cells = <&eeprom_factory_0>; + nvmem-cell-names = "eeprom"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds index 203f460aa21..7e4512f30f8 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds @@ -207,6 +207,9 @@ teltonika,rutc50) ucidef_set_led_netdev "wan-green" "WAN" "mdio-bus:00:green:wan" "wan" "link_1000 tx rx" ucidef_set_led_netdev "wan-amber" "WAN" "mdio-bus:00:amber:wan" "wan" "link_100 link_10 tx rx" ;; +totolink,x6000r) + ucidef_set_led_netdev "wan" "wan" "green:wan" "wan" "link tx rx" + ;; tplink,fr365-v1) ucidef_set_led_netdev "port2-green-act" "port-2" "green:port2_act" "port2" "link tx rx" ucidef_set_led_netdev "port1-green-act" "port-1" "green:sfp" "port1" "link tx rx" diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index b97586e0948..6cd12bc3004 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -2012,6 +2012,17 @@ define Device/tenbay_wr3000k endef TARGET_DEVICES += tenbay_wr3000k +define Device/totolink_x6000r + DEVICE_VENDOR := TOTOLINK + DEVICE_MODEL := X6000R + DEVICE_DTS := mt7981b-totolink-x6000r + DEVICE_DTS_DIR := ../dts + IMAGES := sysupgrade.bin + IMAGE_SIZE := 14336k + DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware +endef +TARGET_DEVICES += totolink_x6000r + define Device/tplink_archer-ax80-v1 DEVICE_VENDOR := TP-Link DEVICE_MODEL := Archer AX80V1