Bart Van Assche [Tue, 19 Aug 2025 15:43:49 +0000 (08:43 -0700)]
scsi: ufs: core: Reduce the size of struct ufshcd_lrb
The size of the data structures that are used in the hot path matters
for performance (IOPS). Hence this patch that reduces the size of struct
ufshcd_lrb on 64-bit systems by 16 bytes. The size of this data
structure is reduced from 152 to 136 bytes.
Bart Van Assche [Tue, 19 Aug 2025 15:39:50 +0000 (08:39 -0700)]
scsi: ufs: core: Only collect timestamps if monitoring is enabled
Every ktime_get() call in the hot path has a measurable impact on IOPS.
Hence, only collect timestamps if the monitoring functionality is
enabled.
See also commit 1d8613a23f3c ("scsi: ufs: core: Introduce HBA
performance monitor sysfs nodes").
Cc: Can Guo <cang@codeaurora.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Daejun Park <daejun7.park@samsung.com> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250819153958.2255907-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
purex_item.iocb is defined as a 64-element u8 array, but 64 is the
minimum size and it can be allocated larger. This makes it a standard
empty flex array.
This was motivated by field-spanning write warnings during FPIN testing:
> kernel: memcpy: detected field-spanning write (size 60) of single field
> "((uint8_t *)fpin_pkt + buffer_copy_offset)"
> at drivers/scsi/qla2xxx/qla_isr.c:1221 (size 44)
I removed the outer wrapper from the iocb flex array, so that it can be
linked to 'purex_item.size' with '__counted_by'.
These changes remove the default minimum 64-byte allocation, requiring
further changes.
In 'struct scsi_qla_host' the embedded 'default_item' is now followed
by '__default_item_iocb[QLA_DEFAULT_PAYLOAD_SIZE]' to reserve space
that will be used as 'default_item.iocb'. This is wrapped using the
'TRAILING_OVERLAP()' macro helper, which effectively creates a union
between flexible-array member 'default_item.iocb' and
'__default_item_iocb'.
Since 'struct pure_item' now contains a flexible-array member, the
helper must be placed at the end of 'struct scsi_qla_host' to prevent
a '-Wflex-array-member-not-at-end' warning.
'qla24xx_alloc_purex_item()' is adjusted to no longer expect the
default minimum size to be part of 'sizeof(struct purex_item)', the
entire flexible array size is added to the structure size for
allocation.
This also slightly changes the layout of the purex_item struct, as
2-bytes of padding are added between 'size' and 'iocb'. The resulting
size is the same, but iocb is shifted 2-bytes (the original 'purex_item'
structure was padded at the end, after the 64-byte defined array size).
I don't think this is a problem.
Tested-by: Bryan Gurney <bgurney@redhat.com> Co-developed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Chris Leech <cleech@redhat.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20250813200744.17975-10-bgurney@redhat.com Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Niklas Cassel [Thu, 14 Aug 2025 17:32:25 +0000 (19:32 +0200)]
scsi: pm80xx: Use pm80xx_get_local_phy_id() to access phy array
While the current code is perfectly fine (because we verify that the
device is directly attached before using attached_phy to index the
pm8001_ha->phy array), let's use the pm80xx_get_local_phy_id() helper
anyway, to reduce the chance that someone will copy paste this pattern
to other parts of the driver.
Note that in this specific case, we still need to keep the check that
the device is not behind an expander, because we do not want to clear
attached_phy of the expander if a device behind the expander disappears
(as that would disable all the other devices behind the expander).
However, if it is the expander itself that disappears, attached_phy will
be cleared, just like it would for any other directly attached device.
Signed-off-by: Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/r/20250814173215.1765055-22-cassel@kernel.org Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Igor Pylypiv <ipylypiv@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Niklas Cassel [Thu, 14 Aug 2025 17:32:24 +0000 (19:32 +0200)]
scsi: pm80xx: Fix pm8001_abort_task() for chip_8006 when using an expander
For a direct attached device, attached_phy contains the local phy id.
For a device behind an expander, attached_phy contains the remote phy
id, not the local phy id.
The pm8001_ha->phy array only contains the phys of the HBA. It does not
contain the phys of the expander.
Thus, you cannot use attached_phy to index the pm8001_ha->phy array,
without first verifying that the device is directly attached.
Use the pm80xx_get_local_phy_id() helper to make sure that we use the
local phy id to index the array, regardless if the device is directly
attached or not.
Fixes: 869ddbdcae3b ("scsi: pm80xx: corrected SATA abort handling sequence.") Reviewed-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/r/20250814173215.1765055-21-cassel@kernel.org Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Niklas Cassel [Thu, 14 Aug 2025 17:32:22 +0000 (19:32 +0200)]
scsi: pm80xx: Use dev_parent_is_expander() helper
Make use of the dev_parent_is_expander() helper.
Signed-off-by: Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/r/20250814173215.1765055-19-cassel@kernel.org Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Igor Pylypiv <ipylypiv@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Niklas Cassel [Thu, 14 Aug 2025 17:32:21 +0000 (19:32 +0200)]
scsi: mvsas: Use dev_parent_is_expander() helper
Make use of the dev_parent_is_expander() helper.
Signed-off-by: Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/r/20250814173215.1765055-18-cassel@kernel.org Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Niklas Cassel [Thu, 14 Aug 2025 17:32:20 +0000 (19:32 +0200)]
scsi: isci: Use dev_parent_is_expander() helper
Make use of the dev_parent_is_expander() helper.
Signed-off-by: Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/r/20250814173215.1765055-17-cassel@kernel.org Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Niklas Cassel [Thu, 14 Aug 2025 17:32:19 +0000 (19:32 +0200)]
scsi: hisi_sas: Use dev_parent_is_expander() helper
Make use of the dev_parent_is_expander() helper.
Signed-off-by: Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/r/20250814173215.1765055-16-cassel@kernel.org Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Niklas Cassel [Thu, 14 Aug 2025 17:32:18 +0000 (19:32 +0200)]
scsi: libsas: Add dev_parent_is_expander() helper
Many libsas drivers check if the parent of the device is an expander.
Create a helper that the libsas drivers will use in follow up commits.
Suggested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/r/20250814173215.1765055-15-cassel@kernel.org Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Niklas Cassel [Thu, 14 Aug 2025 17:32:17 +0000 (19:32 +0200)]
scsi: pm80xx: Fix array-index-out-of-of-bounds on rmmod
Since commit f7b705c238d1 ("scsi: pm80xx: Set phy_attached to zero when
device is gone") UBSAN reports:
UBSAN: array-index-out-of-bounds in drivers/scsi/pm8001/pm8001_sas.c:786:17
index 28 is out of range for type 'pm8001_phy [16]'
on rmmod when using an expander.
For a direct attached device, attached_phy contains the local phy id.
For a device behind an expander, attached_phy contains the remote phy
id, not the local phy id.
I.e. while pm8001_ha will have pm8001_ha->chip->n_phy local phys, for a
device behind an expander, attached_phy can be much larger than
pm8001_ha->chip->n_phy (depending on the amount of phys of the
expander).
E.g. on my system pm8001_ha has 8 phys with phy ids 0-7. One of the
ports has an expander connected. The expander has 31 phys with phy ids
0-30.
The pm8001_ha->phy array only contains the phys of the HBA. It does not
contain the phys of the expander. Thus, it is wrong to use attached_phy
to index the pm8001_ha->phy array for a device behind an expander.
Thus, we can only clear phy_attached for devices that are directly
attached.
Fixes: f7b705c238d1 ("scsi: pm80xx: Set phy_attached to zero when device is gone") Reviewed-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/r/20250814173215.1765055-14-cassel@kernel.org Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Niklas Cassel [Thu, 14 Aug 2025 17:32:16 +0000 (19:32 +0200)]
scsi: pm80xx: Restore support for expanders
Commit 0f630c58e31a ("scsi: pm80xx: Do not use libsas port ID") broke
support for expanders. After the commit, devices behind an expander are
no longer detected.
Simply reverting the commit restores support for devices behind an
expander.
Instead of reverting the commit (and reintroducing a helper to get the
port), get the port directly from the lldd_port pointer in struct
asd_sas_port.
Fixes: 0f630c58e31a ("scsi: pm80xx: Do not use libsas port ID") Suggested-by: Igor Pylypiv <ipylypiv@google.com> Reviewed-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/r/20250814173215.1765055-13-cassel@kernel.org Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Wed, 13 Aug 2025 17:10:41 +0000 (10:10 -0700)]
scsi: ufs: core: Improve IOPS
Measurements have shown that IOPS improve by 2% - 3% on my UFS 4 test
setup every time a ktime_get() call is removed from the UFS driver
command processing path. Hence this patch that modifies
ufshcd_clk_scaling_start_busy() such that ktime_get() is only called if
the returned value will be used.
Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250813171049.3399387-1-bvanassche@acm.org Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge patch series "dt-bindings: ufs: qcom: Split SC7180, SM8650 and similar into separate file"
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> says:
The binding for Qualcomm SoC UFS controllers grew and it will grow
further. It already includes several conditionals, partially for
difference in handling encryption block (ICE, either as phandle or as
IO address space) but it will further grow for MCQ.
See also: https://lore.kernel.org/r/20250730082229.23475-1-quic_rdwivedi@quicinc.com
The SM8650 is first SoC coming with MCQ, which was missing in the
binding. Document this as well.
Alice Chao [Mon, 11 Aug 2025 13:11:26 +0000 (21:11 +0800)]
scsi: ufs: host: mediatek: Fix invalid access in vccqx handling
Add a NULL check before accessing the 'vccqx' pointer to prevent invalid
memory access. This ensures that the function safely handles cases where
'vccq' and 'vccq2' are not initialized, improving the robustness of the
power management code.
Peter Wang [Mon, 11 Aug 2025 13:11:25 +0000 (21:11 +0800)]
scsi: ufs: host: mediatek: Change reset sequence for improved stability
Modify the reset sequence to ensure that the device reset pin is set low
before the host is disabled. This change enhances the stability of the
reset process by ensuring the correct order of operations.
Peter Wang [Mon, 11 Aug 2025 13:11:24 +0000 (21:11 +0800)]
scsi: ufs: host: mediatek: Fix UniPro setting for MT6989
Set the UniPro attribute 0xD09E[4] bit to enable the 1144 functions
specifically for the MT6989 platform. This adjustment ensures proper
functionality and compatibility with the MT6989 hardware.
Peter Wang [Mon, 11 Aug 2025 13:11:23 +0000 (21:11 +0800)]
scsi: ufs: host: mediatek: Optimize power mode change handling
Optimize the power mode change process by skipping the adaptation
setting toggle if the requested power mode configuration is already
applied. This enhancement reduces unnecessary operations, improving
efficiency during power mode transitions.
Alice Chao [Mon, 11 Aug 2025 13:11:22 +0000 (21:11 +0800)]
scsi: ufs: host: mediatek: Assign power mode userdata before FASTAUTO mode change
Assign power mode userdata settings before transitioning to FASTAUTO
power mode. This ensures that default timeout values are set for various
parameters, enhancing the reliability and performance of the power mode
change process.
Signed-off-by: Alice Chao <alice.chao@mediatek.com> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Peter Wang <peter.wang@mediatek.com> Link: https://lore.kernel.org/r/20250811131423.3444014-7-peter.wang@mediatek.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Address a failure in switching to PWM mode by ensuring proper
configuration of power modes and adaptation settings. The changes
include checks for SLOW_MODE and adjustments to the desired working mode
and adaptation configuration based on the device's power mode and
hardware version.
Disable clock scaling for UFS versions below 4.0. Clock scaling is
unnecessary for these versions, and this change ensures that the feature
is only enabled for compatible UFS versions.
Peter Wang [Mon, 11 Aug 2025 13:11:19 +0000 (21:11 +0800)]
scsi: ufs: host: mediatek: Add debug information for Auto-Hibern8
Enhance the clock gating logic by adding debug information for the
Auto-Hibern8 (AHIT) register. This additional logging aids in
troubleshooting by providing insights into the AHIT configuration when
the clock is not turned off as expected.
Move the configuration of the Auto-Hibern8 (AHIT) timer from the
post-link stage to the 'fixup_dev_quirks' function. This change allows
setting the AHIT based on the vendor requirements:
(a) Samsung: 3.5 ms
(b) Micron: 2 ms
(c) Others: 1 ms
Additionally, the clock gating timer is adjusted based on the AHIT
scale, with a maximum setting of 10 ms. This ensures that the clock
gating delay is appropriately configured to match the AHIT settings.
scsi: ufs: qcom: dt-bindings: Split SM8650 and similar
The binding for Qualcomm SoC UFS controllers grew and it will grow
further. Split SM8650 and SM8750 UFS controllers which:
1. Do not reference ICE as IO address space, but as phandle,
2. Have same order of clocks.
3. Have MCQ I/O address space. Document that MCQ address space as
optional to maintain backwards compatibility and because Linux
drivers can operate perfectly fine without it (thus without MCQ
feature). Linux driver already uses "mcq" as possible name for
"reg-names" property.
The split allows easier review and maintenance of the binding.
scsi: ufs: qcom: dt-bindings: Split common part to qcom,ufs-common.yaml
The binding for Qualcomm SoC UFS controllers grew and it will grow
further. It already includes several conditionals, partially for
difference in handling encryption block (ICE, either as phandle or as
I/O address space) but it will further grow for MCQ.
Prepare for splitting this one big binding into several ones for common
group of devices by defining common part for all Qualcomm UFS schemas.
This only moves code, no functional impact expected.
Linus Torvalds [Sun, 10 Aug 2025 05:51:37 +0000 (08:51 +0300)]
Merge tag 'smp_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp fixes from Borislav Petkov:
- Remove an obsolete comment and fix spelling
* tag 'smp_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Remove obsolete comment from takedown_cpu()
smp: Fix spelling in on_each_cpu_cond_mask()'s doc-comment
Linus Torvalds [Sun, 10 Aug 2025 05:46:47 +0000 (08:46 +0300)]
Merge tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a wrong ioremap size in mvebu-gicp
- Remove yet another compile-test case for a driver which needs an
additional dependency
- Fix a lock inversion scenario in the IRQ unit test suite
- Remove an impossible flag situation in gic-v5
- Do not iounmap resources in gic-v5 which are managed by devm
- Make sure stale, left-over interrupts in mvebu-gicp are cleared on
driver init
- Fix a reference counting mishap in msi-lib
- Fix a dereference-before-null-ptr-check case in the riscv-imsic
irqchip driver
* tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mvebu-gicp: Use resource_size() for ioremap()
irqchip: Build IMX_MU_MSI only on ARM
genirq/test: Resolve irq lock inversion warnings
irqchip/gic-v5: Remove IRQD_RESEND_WHEN_IN_PROGRESS for ITS IRQs
irqchip/gic-v5: iwb: Fix iounmap probe failure path
irqchip/mvebu-gicp: Clear pending interrupts on init
irqchip/msi-lib: Fix fwnode refcount in msi_lib_irq_domain_select()
irqchip/riscv-imsic: Don't dereference before NULL pointer check
Linus Torvalds [Sun, 10 Aug 2025 05:15:32 +0000 (08:15 +0300)]
Merge tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix an interrupt vector setup race which leads to a non-functioning
device
- Add new Intel CPU models *and* a family: 0x12. Finally. Yippie! :-)
* tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Plug vector setup race
x86/cpu: Add new Intel CPU model numbers for Wildcatlake and Novalake
Len Brown [Sun, 10 Aug 2025 01:08:26 +0000 (21:08 -0400)]
tools/power turbostat: version 2025.09.09
Probe and display L3 Cache topology
Add ability to average an added counter
(useful for pre-integrated "counters", such as Watts)
Break the limit of 64 built-in counters.
Assorted bug fixes and minor feature tweaks
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/
may be readable by all, but
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/current_freq_khz
may be readable only by root.
Non-root turbostat users see complaints in this scenario.
Fail probe of the interface if we can't read current_freq_khz.
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Original-patch-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Zhang Rui [Wed, 11 Jun 2025 06:50:26 +0000 (14:50 +0800)]
tools/power turbostat: Fix DMR support
Together with the RAPL MSRs, there are more MSRs gone on DMR, including
PLR (Perf Limit Reasons), and IRTL (Package cstate Interrupt Response
Time Limit) MSRs. The configurable TDP info should also be retrieved
from TPMI based Intel Speed Select Technology feature.
Remove the access of these MSRs for DMR. Improve the DMR platform
feature table to make it more readable at the same time.
Fixes: 83075bd59de2 ("tools/power turbostat: Add initial support for DMR") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
tools/power turbostat: add format "average" for external attributes
External atributes with format "raw" are not printed in summary lines
for nodes/packages (or with option -S). The new format "average"
behaves like "raw" but also adds the summary data
Signed-off-by: Michael Hebenstreit <michael.hebenstreit@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Sat, 12 Jul 2025 20:16:56 +0000 (16:16 -0400)]
tools/power turbostat: Support more than 64 built-in-counters
We have out-grown the ability to use a 64-bit memory location
to inventory every possible built-in counter.
Leverage the the CPU_SET(3) macros to break this barrier.
Also, break the Joules & Watts counters into two,
since we can no longer 'or' them together...
Linus Torvalds [Sat, 9 Aug 2025 15:12:23 +0000 (18:12 +0300)]
Merge tag 'tty-6.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull TTY fix from Greg KH:
"Here is a single revert of one of the previous patches that went in
the last tty/serial merge that is breaking userspace on some platforms
(specifically powerpc, probably a few others.)
It accidentially changed the ioctl values of some tty ioctls, which
breaks xorg.
The revert has been in linux-next all this week with no reported
issues"
* tag 'tty-6.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "tty: vt: use _IO() to define ioctl numbers"
Linus Torvalds [Sat, 9 Aug 2025 05:47:28 +0000 (08:47 +0300)]
Merge tag 'block-6.17-20250808' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- MD pull request via Yu:
- mddev null-ptr-dereference fix, by Erkun
- md-cluster fail to remove the faulty disk regression fix, by
Heming
- minor cleanup, by Li Nan and Jinchao
- mdadm lifetime regression fix reported by syzkaller, by Yu Kuai
- MD pull request via Christoph
- add support for getting the FDP featuee in fabrics passthru path
(Nitesh Shetty)
- add capability to connect to an administrative controller
(Kamaljit Singh)
- fix a leak on sgl setup error (Keith Busch)
- initialize discovery subsys after debugfs is initialized
(Mohamed Khalfella)
- fix various comment typos (Bjorn Helgaas)
- remove unneeded semicolons (Jiapeng Chong)
- nvmet debugfs ordering issue fix
- Fix UAF in the tag_set in zloop
- Ensure sbitmap shallow depth covers entire set
- Reduce lock roundtrips in io context lookup
- Move scheduler tags alloc/free out of elevator and freeze lock, to
fix some lockdep found issues
- Improve robustness of queue limits checking
- Fix a regression with IO priorities, if no io context exists
* tag 'block-6.17-20250808' of git://git.kernel.dk/linux: (26 commits)
lib/sbitmap: make sbitmap_get_shallow() internal
lib/sbitmap: convert shallow_depth from one word to the whole sbitmap
nvmet: exit debugfs after discovery subsystem exits
block, bfq: Reorder struct bfq_iocq_bfqq_data
md: make rdev_addable usable for rcu mode
md/raid1: remove struct pool_info and related code
md/raid1: change r1conf->r1bio_pool to a pointer type
block: ensure discard_granularity is zero when discard is not supported
zloop: fix KASAN use-after-free of tag set
block: Fix default IO priority if there is no IO context
nvme: fix various comment typos
nvme-auth: remove unneeded semicolon
nvme-pci: fix leak on sgl setup error
nvmet: initialize discovery subsys after debugfs is initialized
nvme: add capability to connect to an administrative controller
nvmet: add support for FDP in fabrics passthru path
md: rename recovery_cp to resync_offset
md/md-cluster: handle REMOVE message earlier
md: fix create on open mddev lifetime regression
block: fix potential deadlock while running nr_hw_queue update
...
Linus Torvalds [Sat, 9 Aug 2025 05:45:08 +0000 (08:45 +0300)]
Merge tag 'io_uring-6.17-20250808' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Allow vectorized payloads for send/send-zc - like sendmsg, but
without the hassle of a msghdr.
- Fix for an integer wrap that should go to stable, spotted by syzbot.
Nothing alarming here, as you need to be root to hit this.
Nevertheless, it should get fixed.
FWIW, kudos to the syzbot crew for having much nicer reproducers now,
and with nicely annotated source code as well. This is particularly
useful as syzbot uses the raw interface rather than liburing,
historically it's been difficult to turn a syzbot reproducer into a
meaningful test case. With the recent changes, not true anymore!
* tag 'io_uring-6.17-20250808' of git://git.kernel.dk/linux:
io_uring/memmap: cast nr_pages to size_t before shifting
io_uring/net: Allow to do vectorized send
Linus Torvalds [Sat, 9 Aug 2025 05:43:24 +0000 (08:43 +0300)]
Merge tag 'spi-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There's one fix here for an issue with the CS42L43 where we were
allocating a single property for client devices as just that property
rather than a terminated array of properties like we are supposed to.
We also have an update to the MAINTAINERS file for some Renesas
devices"
* tag 'spi-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cs42l43: Property entry should be a null-terminated array
MAINTAINERS: Add entries for the RZ/V2H(P) RSPI
Linus Torvalds [Sat, 9 Aug 2025 05:41:53 +0000 (08:41 +0300)]
Merge tag 'regulator-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"This fixes an issue with the newly added code for handling large
voltage changes on regulators which require that individual voltage
changes cover a limited range, the check for convergence was broken"
* tag 'regulator-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: correct convergence check in regulator_set_voltage()
Linus Torvalds [Sat, 9 Aug 2025 05:40:28 +0000 (08:40 +0300)]
Merge tag 'regmap-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"These patches fix a lockdep issue Russell King reported with nested
regmap-irqs (unusual since regmap is generally for devices on slow
buses so devices don't get nested), plus add a missing mutex free
which I noticed while implementing a fix for that issue"
* tag 'regmap-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Avoid lockdep warnings with nested regmap-irq chips
regmap: irq: Free the regmap-irq mutex
Linus Torvalds [Sat, 9 Aug 2025 05:37:17 +0000 (08:37 +0300)]
Merge tag 'mailbox-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- aspeed: add driver and bindings for ast2700
- broadcom: add driver and bindings for bcm74110
- mediatek: fix RPM api usage
- qcom: use dev_fwnode
- pcc: support shared buffer
- misc dt-bindings cleanup
* tag 'mailbox-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox/pcc: support mailbox management of the shared buffer
mailbox: bcm74110: Fix spelling mistake
mailbox: bcm74110: remove unneeded semicolon
mailbox: aspeed: add mailbox driver for AST27XX series SoC
dt-bindings: mailbox: Add ASPEED AST2700 series SoC
dt-bindings: mailbox: Drop consumers example DTS
dt-bindings: mailbox: nvidia,tegra186-hsp: Use generic node name
dt-bindings: mailbox: Correct example indentation
dt-bindings: mailbox: ti,secure-proxy: Add missing reg maxItems
dt-bindings: mailbox: amlogic,meson-gxbb-mhu: Add missing interrupts maxItems
dt-bindings: mailbox: qcom-ipcc: document the Milos Inter-Processor Communication Controller
mailbox: Add support for bcm74110
dt-bindings: mailbox: Add support for bcm74110
mailbox: Use dev_fwnode()
mailbox: mtk-cmdq: Switch to pm_runtime_put_autosuspend()
Linus Torvalds [Sat, 9 Aug 2025 05:15:43 +0000 (08:15 +0300)]
Merge tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"As discussed: there's a small commit that removes the legacy GPIO line
value setter callbacks as they're no longer used and a big, treewide
commit that renames the new ones to the old names across all GPIO
drivers at once.
While at it: there are also two fixes that I picked up over the course
of the merge window:
- remove unused, legacy GPIO line value setters from struct gpio_chip
- rename the new set callbacks back to the original names treewide
- fix interrupt handling in gpio-mlxbf2
- revert a buggy immutable irqchip conversion"
* tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
treewide: rename GPIO set callbacks back to their original names
gpio: remove legacy GPIO line value setter callbacks
gpio: mlxbf2: use platform_get_irq_optional()
Revert "gpio: pxa: Make irq_chip immutable"
Linus Torvalds [Sat, 9 Aug 2025 05:12:41 +0000 (08:12 +0300)]
Merge tag 'sound-fix-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
- Support for ASoC AMD ACP 7.2 with new IDs
- ASoC Intel AVS and SOF fixes
- Yet more kconfig adjustments for HD-audio codecs
- TAS2781 codec fixes
- Fixes for longstanding (rather minor) bugs in Intel LPE audio and
USB-audio drivers
* tag 'sound-fix-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/cirrus: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/hdmi: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/realtek: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/ca0132: Fix missing error handling in ca0132_alt_select_out()
ASoC: SOF: Intel: hda-sdw-bpt: fix SND_SOF_SOF_HDA_SDW_BPT dependencies
ALSA: hda/tas2781: Support L"SmartAmpCalibrationData" to save calibrated data
ALSA: intel_hdmi: Fix off-by-one error in __hdmi_lpe_audio_probe()
ALSA: hda/realtek: add LG gram 16Z90R-A to alc269 fixup table
ALSA: usb-audio: Don't use printk_ratelimit for debug prints
ASoC: Intel: sof_sdw: Add quirk for Alienware Area 51 (2025) 0CCC SKU
ASoC: tas2781: Fix the wrong step for TLV on tas2781
ASoC: amd: acp: Add SoundWire SOF machine driver support for acp7.2 platform
ASoC: amd: acp: Add SoundWire legacy machine driver support for acp7.2 platform
ASoC: amd: ps: Add SoundWire pci and dma driver support for acp7.2 platform
ASoC: SOF: amd: Add sof audio support for acp7.2 platform
ASoC: Intel: avs: Fix uninitialized pointer error in probe()
ASoC: wm8962: Clear master mode when enter runtime suspend
ASoC: SOF: amd: acp-loader: Use GFP_KERNEL for DMA allocations in resume context
Linus Torvalds [Sat, 9 Aug 2025 04:58:55 +0000 (07:58 +0300)]
Merge tag 'soc-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These are a few patches to fix up bits that went missing during the
merge window: The tegra and s3c patches address trivial regressions
from conflicts, the bcm7445 makes the dt conform to the binding that
was made stricter"
* tag 'soc-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: tegra: Remove numa-node-id properties
ARM: s3c/gpio: complete the conversion to new GPIO value setters
ARM: dts: broadcom: Fix bcm7445 memory controller compatible
Linus Torvalds [Sat, 9 Aug 2025 04:35:03 +0000 (07:35 +0300)]
Merge tag 'xtensa-20250808' of https://github.com/jcmvbkbc/linux-xtensa
Pull xtensa update from Max Filippov:
- replace __ASSEMBLY__ with __ASSEMBLER__ in arch headers
* tag 'xtensa-20250808' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
xtensa: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
Linus Torvalds [Sat, 9 Aug 2025 04:26:19 +0000 (07:26 +0300)]
Merge tag 'v6.17-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a regression that broke hmac(sha3-224-s390)"
* tag 'v6.17-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hash - Increase HASH_MAX_DESCSIZE for hmac(sha3-224-s390)
Linus Torvalds [Sat, 9 Aug 2025 04:20:44 +0000 (07:20 +0300)]
Merge tag 'nfs-for-6.17-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- don't inherit NFS filesystem capabilities when crossing from one
filesystem to another
Bugfixes:
- NFS wakeup of __nfs_lookup_revalidate() needs memory barriers
- NFS improve bounds checking in nfs_fh_to_dentry()
- NFS Fix allocation errors when writing to a NFS file backed
loopback device
- NFSv4: More listxattr fixes
- SUNRPC: fix client handling of TLS alerts
- pNFS block/scsi layout fix for an uninitialised pointer
dereference
- pNFS block/scsi layout fixes for the extent encoding, stripe
mapping, and disk offset overflows
- pNFS layoutcommit work around for RPC size limitations
- pNFS/flexfiles avoid looping when handling fatal errors after
layoutget
- localio: fix various race conditions
Features and cleanups:
- Add NFSv4 support for retrieving the btime
- NFS: Allow folio migration for the case of mode == MIGRATE_SYNC
- NFS: Support using a kernel keyring to store TLS certificates
- NFSv4: Speed up delegation lookup using a hash table
- Assorted cleanups to remove unused variables and struct fields
- Assorted new tracepoints to improve debugging"
* tag 'nfs-for-6.17-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (44 commits)
NFS/localio: nfs_uuid_put() fix the wake up after unlinking the file
NFS/localio: nfs_uuid_put() fix races with nfs_open/close_local_fh()
NFS/localio: nfs_close_local_fh() fix check for file closed
NFSv4: Remove duplicate lookups, capability probes and fsinfo calls
NFS: Fix the setting of capabilities when automounting a new filesystem
sunrpc: fix client side handling of tls alerts
nfs/localio: use read_seqbegin() rather than read_seqbegin_or_lock()
NFS: Fixup allocation flags for nfsiod's __GFP_NORETRY
NFSv4.2: another fix for listxattr
NFS: Fix filehandle bounds checking in nfs_fh_to_dentry()
SUNRPC: Silence warnings about parameters not being described
NFS: Clean up pnfs_put_layout_hdr()/pnfs_destroy_layout_final()
NFS: Fix wakeup of __nfs_lookup_revalidate() in unblock_revalidate()
NFS: use a hash table for delegation lookup
NFS: track active delegations per-server
NFS: move the delegation_watermark module parameter
NFS: cleanup nfs_inode_reclaim_delegation
NFS: cleanup error handling in nfs4_server_common_setup
pNFS/flexfiles: don't attempt pnfs on fatal DS errors
NFS: drop __exit from nfs_exit_keyring
...
Linus Torvalds [Sat, 9 Aug 2025 04:12:43 +0000 (07:12 +0300)]
Merge tag 'v6.17rc-part2-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
"Non-smbdirect:
- Fix null ptr deref caused by delay in global spinlock
initialization
- Two fixes for native symlink creation with SMB3.1.1 POSIX
Extensions
- Fix for socket special file creation with SMB3.1.1 POSIX Exensions
- Reduce lock contention by splitting out mid_counter_lock
- move SMB1 transport code to separate file to reduce module size
when support for legacy servers is disabled
- Two cleanup patches: rename mid_lock to make it clearer what it
protects and one to convert mid flags to bool to make clearer
Smbdirect/RDMA restructuring and fixes:
- Fix for error handling in send done
- Remove unneeded empty packet queue
- Fix put_receive_buffer error path
- Two fixes to recv_done error paths
- Remove unused variable
- Improve response and recvmsg type handling
- Fix handling of incoming message type
- Two cleanup fixes for better handling smbdirect recv io
- Two cleanup fixes for socket spinlock
- Two patches that add socket reassembly struct
- Remove unused connection_status enum
- Use flag in common header for SMBDIRECT_RECV_IO_MAX_SGE
- Two cleanup patches to introduce and use smbdirect send io
- Two cleanup patches to introduce and use smbdirect send_io struct
- Fix to return error if rdma connect takes longer than 5 seconds
- Error logging improvements
- Fix redundand call to init_waitqueue_head
- Remove unneeded wait queue"
* tag 'v6.17rc-part2-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: (33 commits)
smb: client: only use a single wait_queue to monitor smbdirect connection status
smb: client: don't call init_waitqueue_head(&info->conn_wait) twice in _smbd_get_connection
smb: client: improve logging in smbd_conn_upcall()
smb: client: return an error if rdma_connect does not return within 5 seconds
smb: client: make use of smbdirect_socket.{send,recv}_io.mem.{cache,pool}
smb: smbdirect: add smbdirect_socket.{send,recv}_io.mem.{cache,pool}
smb: client: make use of struct smbdirect_send_io
smb: smbdirect: introduce struct smbdirect_send_io
smb: client: make use of SMBDIRECT_RECV_IO_MAX_SGE
smb: smbdirect: add SMBDIRECT_RECV_IO_MAX_SGE
smb: client: remove unused enum smbd_connection_status
smb: client: make use of smbdirect_socket.recv_io.reassembly.*
smb: smbdirect: introduce smbdirect_socket.recv_io.reassembly.*
smb: client: make use of smb: smbdirect_socket.recv_io.free.{list,lock}
smb: smbdirect: introduce smbdirect_socket.recv_io.free.{list,lock}
smb: client: make use of struct smbdirect_recv_io
smb: smbdirect: introduce struct smbdirect_recv_io
smb: client: make use of smbdirect_socket->recv_io.expected
smb: smbdirect: introduce smbdirect_socket.recv_io.expected
smb: client: remove unused smbd_connection->fragment_reassembly_remaining
...
Linus Torvalds [Sat, 9 Aug 2025 03:52:37 +0000 (06:52 +0300)]
Merge tag 'v6.17rc-part2-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix limiting repeated connections from same IP
- Fix for extracting shortname when name begins with a dot
- Four smbdirect fixes:
- three fixes to the receive path: potential unmap bug, potential
resource leaks and stale connections, and also potential use
after free race
- cleanup to remove unneeded queue
* tag 'v6.17rc-part2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
smb: server: Fix extension string in ksmbd_extract_shortname()
ksmbd: limit repeated connections from clients with the same IP
smb: server: let recv_done() avoid touching data_transfer after cleanup/move
smb: server: let recv_done() consistently call put_recvmsg/smb_direct_disconnect_rdma_connection
smb: server: make sure we call ib_dma_unmap_single() only if we called ib_dma_map_single already
smb: server: remove separate empty_recvmsg_queue
Zhang Rui [Tue, 17 Jun 2025 12:48:59 +0000 (20:48 +0800)]
tools/power turbostat: Fix bogus SysWatt for forked program
Similar to delta_cpu(), delta_platform() is called in turbostat main
loop. This ensures accurate SysWatt readings in periodic monitoring mode
$ sudo turbostat -S -q --show power -i 1
CoreTmp PkgTmp PkgWatt CorWatt GFXWatt RAMWatt PKG_% RAM_% SysWatt
60 61 6.21 1.13 0.16 0.00 0.00 0.00 13.07
58 61 6.00 1.07 0.18 0.00 0.00 0.00 12.75
58 61 5.74 1.05 0.17 0.00 0.00 0.00 12.22
58 60 6.27 1.11 0.24 0.00 0.00 0.00 13.55
However, delta_platform() is missing for forked program and causes bogus
SysWatt reporting,
$ sudo turbostat -S -q --show power sleep 1
1.004736 sec
CoreTmp PkgTmp PkgWatt CorWatt GFXWatt RAMWatt PKG_% RAM_% SysWatt
57 58 6.05 1.02 0.16 0.00 0.00 0.00 0.03
Add missing delta_platform() for forked program.
Fixes: e5f687b89bc2 ("tools/power turbostat: Add RAPL psys as a built-in counter") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Kernels configured with CONFIG_MULTIUSER=n have no cap_get_proc().
Check for ENOSYS to recognize this case, and continue on to
attempt to access the requested MSRs (such as temperature).
Signed-off-by: Calvin Owens <calvin@wbinvd.org> Signed-off-by: Len Brown <len.brown@intel.com>
Calvin Owens [Fri, 13 Jun 2025 16:54:23 +0000 (09:54 -0700)]
tools/power turbostat: Fix build with musl
turbostat.c: In function 'parse_int_file':
turbostat.c:5567:19: error: 'PATH_MAX' undeclared (first use in this function)
5567 | char path[PATH_MAX];
| ^~~~~~~~
turbostat.c: In function 'probe_graphics':
turbostat.c:6787:19: error: 'PATH_MAX' undeclared (first use in this function)
6787 | char path[PATH_MAX];
| ^~~~~~~~
Signed-off-by: Calvin Owens <calvin@wbinvd.org> Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Jens Axboe [Fri, 8 Aug 2025 12:35:14 +0000 (06:35 -0600)]
io_uring/memmap: cast nr_pages to size_t before shifting
If the allocated size exceeds UINT_MAX, then it's necessary to cast
the mr->nr_pages value to size_t to prevent it from overflowing. In
practice this isn't much of a concern as the required memory size will
have been validated upfront, and accounted to the user. And > 4GB sizes
will be necessary to make the lack of a cast a problem, which greatly
exceeds normal user locked_vm settings that are generally in the kb to
mb range. However, if root is used, then accounting isn't done, and
then it's possible to hit this issue.
Adam Young [Tue, 15 Jul 2025 00:10:07 +0000 (20:10 -0400)]
mailbox/pcc: support mailbox management of the shared buffer
Define a new, optional, callback that allows the driver to
specify how the return data buffer is allocated. If that callback
is set, mailbox/pcc.c is now responsible for reading from and
writing to the PCC shared buffer.
This also allows for proper checks of the Commnand complete flag
between the PCC sender and receiver.
For Type 4 channels, initialize the command complete flag prior
to accepting messages.
Since the mailbox does not know what memory allocation scheme
to use for response messages, the client now has an optional
callback that allows it to allocate the buffer for a response
message.
When an outbound message is written to the buffer, the mailbox
checks for the flag indicating the client wants an tx complete
notification via IRQ. Upon receipt of the interrupt It will
pair it with the outgoing message. The expected use is to
free the kernel memory buffer for the previous outgoing message.
Signed-off-by: Adam Young <admiyo@os.amperecomputing.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
- net: drop UFO packets (injected via virtio) in udp_rcv_segment()
- eth: mlx5: correctly set gso_segs when LRO is used, avoid false
positive checksum validation errors
- netpoll: prevent hanging NAPI when netcons gets enabled
- phy: mscc: fix parsing of unicast frames for PTP timestamping
- a number of device tree / OF reference leak fixes"
* tag 'net-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
pptp: fix pptp_xmit() error path
net: ti: icssg-prueth: Fix skb handling for XDP_PASS
net: Update threaded state in napi config in netif_set_threaded
selftests: netdevsim: Xfail nexthop test on slow machines
eth: fbnic: Lock the tx_dropped update
eth: fbnic: Fix tx_dropped reporting
eth: fbnic: remove the debugging trick of super high page bias
net: ftgmac100: fix potential NULL pointer access in ftgmac100_phy_disconnect
dt-bindings: net: Replace bouncing Alexandru Tachici emails
dpll: zl3073x: ZL3073X_I2C and ZL3073X_SPI should depend on NET
net/sched: mqprio: fix stack out-of-bounds write in tc entry parsing
Revert "net: mdio_bus: Use devm for getting reset GPIO"
selftests: net: packetdrill: xfail all problems on slow machines
net/packet: fix a race in packet_set_ring() and packet_notifier()
benet: fix BUG when creating VFs
net: airoha: npu: Add missing MODULE_FIRMWARE macros
net: devmem: fix DMA direction on unmapping
ipa: fix compile-testing with qcom-mdt=m
eth: fbnic: unlink NAPIs from queues on error to open
net: Add locking to protect skb->dev access in ip_output
...
Linus Torvalds [Fri, 8 Aug 2025 03:56:55 +0000 (06:56 +0300)]
Merge tag 's390-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Support MMIO read/write tracing
- Enable THP swapping and THP migration
- Unmask SLCF bit ("stateless command filtering") introduced with CEX8
cards, so that user space applications like lszcrypt could evaluate
and list this feature
- Fix the value of high_memory variable, so it considers possible
tailing offline memory blocks
- Make vmem_pte_alloc() consistent and always allocate memory of
PAGE_SIZE for page tables. This ensures a page table occupies the
whole page, as the rest of the code assumes
- Fix kernel image end address in the decompressor debug output
- Fix a typo in debug_sprintf_format_fn() comment
* tag 's390-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/debug: Fix typo in debug_sprintf_format_fn() comment
s390/boot: Fix startup debugging log
s390/mm: Allocate page table with PAGE_SIZE granularity
s390/mm: Enable THP_SWAP and THP_MIGRATION
s390: Support CONFIG_TRACE_MMIO_ACCESS
s390/mm: Set high_memory at the end of the identity mapping
s390/ap: Unmask SLCF bit in card and queue ap functions sysfs
Linus Torvalds [Fri, 8 Aug 2025 03:48:14 +0000 (06:48 +0300)]
Merge tag 'drm-next-2025-08-08' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"This is the fixes that built up in the merge window, mostly amdgpu and
xe with one i915 display fix, seems like things are pretty good for
rc1.
i915:
- DP LPFS fixes
xe:
- SRIOV: PF fixes and removal of need of module param
- Fix driver unbind around Devcoredump
- Mark xe driver as BROKEN if kernel page size is not 4kB
* tag 'drm-next-2025-08-08' of https://gitlab.freedesktop.org/drm/kernel: (28 commits)
drm/amdgpu: add missing vram lost check for LEGACY RESET
drm/amdgpu/discovery: fix fw based ip discovery
drm/amdkfd: Destroy KFD debugfs after destroy KFD wq
amdgpu/amdgpu_discovery: increase timeout limit for IFWI init
drm/amdgpu: Update SDMA firmware version check for user queue support
drm/amdgpu: Add NULL check for asic_funcs
drm/amd/display: Revert "drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL value"
drm/amd/display: fix a Null pointer dereference vulnerability
drm/amd/display: Add primary plane to commits for correct VRR handling
drm/amdgpu: update mmhub 3.3 client id mappings
drm/amdgpu: update mmhub 3.0.1 client id mappings
drm/amdgpu: Retain job->vm in amdgpu_job_prepare_job
drm/amd/display: Fix DCE 6.0 and 6.4 PLL programming.
drm/amd/display: Don't overwrite dce60_clk_mgr
drm/amdkfd: Fix checkpoint-restore on multi-xcc
drm/amd: Restore cached manual clock settings during resume
drm/amd: Restore cached power limit during resume
drm/amdgpu: Update external revid for GC v9.5.0
drm/amdgpu: Update supported modes for GC v9.5.0
Mark xe driver as BROKEN if kernel page size is not 4kB
...
Linus Torvalds [Fri, 8 Aug 2025 03:43:20 +0000 (06:43 +0300)]
Merge tag 'fbdev-for-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes for 6.17-rc1:
- Revert a patch which broke VGA console
- Fix an out-of-bounds access bug which may happen during console
resizing when a console is mapped to a frame buffer
* tag 'fbdev-for-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
Revert "vgacon: Add check for vc_origin address range in vgacon_scroll()"
fbdev: Fix vmalloc out-of-bounds write in fast_imageblit
Linus Torvalds [Fri, 8 Aug 2025 03:36:48 +0000 (06:36 +0300)]
Merge tag 'loongarch-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Complete KSave registers definition
- Support the mem=<size> kernel parameter
- Support BPF dynamic modification & trampoline
- Add MMC/SDIO controller nodes in dts
- Some bug fixes and other small changes
* tag 'loongarch-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: vDSO: Remove -nostdlib complier flag
LoongArch: dts: Add eMMC/SDIO controller support to Loongson-2K2000
LoongArch: dts: Add SDIO controller support to Loongson-2K1000
LoongArch: dts: Add SDIO controller support to Loongson-2K0500
LoongArch: BPF: Set bpf_jit_bypass_spec_v1/v4()
LoongArch: BPF: Fix the tailcall hierarchy
LoongArch: BPF: Fix jump offset calculation in tailcall
LoongArch: BPF: Add struct ops support for trampoline
LoongArch: BPF: Add basic bpf trampoline support
LoongArch: BPF: Add dynamic code modification support
LoongArch: BPF: Rename and refactor validate_code()
LoongArch: Add larch_insn_gen_{beq,bne} helpers
LoongArch: Don't use %pK through printk() in unwinder
LoongArch: Avoid in-place string operation on FDT content
LoongArch: Support mem=<size> kernel parameter
LoongArch: Make relocate_new_kernel_size be a .quad value
LoongArch: Complete KSave registers definition
Thorsten Blum [Wed, 6 Aug 2025 01:03:49 +0000 (03:03 +0200)]
smb: server: Fix extension string in ksmbd_extract_shortname()
In ksmbd_extract_shortname(), strscpy() is incorrectly called with the
length of the source string (excluding the NUL terminator) rather than
the size of the destination buffer. This results in "__" being copied
to 'extension' rather than "___" (two underscores instead of three).
Use the destination buffer size instead to ensure that the string "___"
(three underscores) is copied correctly.
Cc: stable@vger.kernel.org Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Namjae Jeon [Tue, 5 Aug 2025 09:13:13 +0000 (18:13 +0900)]
ksmbd: limit repeated connections from clients with the same IP
Repeated connections from clients with the same IP address may exhaust
the max connections and prevent other normal client connections.
This patch limit repeated connections from clients with the same IP.
Reported-by: tianshuo han <hantianshuo233@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Dave Airlie [Thu, 7 Aug 2025 19:50:02 +0000 (05:50 +1000)]
Merge tag 'drm-xe-next-fixes-2025-08-06' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
- SRIOV: PF fixes and removal of need of module param (Michal)
- Fix driver unbind around Devcoredump (Bala)
- Mark xe driver as BROKEN if kernel page size is not 4kB (Simon)
smb: client: only use a single wait_queue to monitor smbdirect connection status
There's no need for separate conn_wait and disconn_wait queues.
This will simplify the move to common code, the server code
already a single wait_queue for this.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: don't call init_waitqueue_head(&info->conn_wait) twice in _smbd_get_connection
It is already called long before we may hit this cleanup code path.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: improve logging in smbd_conn_upcall()
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: return an error if rdma_connect does not return within 5 seconds
This matches the timeout for tcp connections.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: f198186aa9bb ("CIFS: SMBD: Establish SMB Direct connection") Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Nam Cao [Thu, 7 Aug 2025 08:10:51 +0000 (10:10 +0200)]
PCI: vmd: Fix wrong kfree() in vmd_msi_free()
vmd_msi_alloc() allocates struct vmd_irq and stashes it into
irq_data->chip_data associated with the VMD's interrupt domain.
vmd_msi_free() extracts the pointer by calling irq_get_chip_data() and
frees it.
irq_get_chip_data() returns the chip_data associated with the top interrupt
domain. This worked in the past because VMD's interrupt domain was the top
domain.
But d7d8ab87e3e7 ("PCI: vmd: Switch to msi_create_parent_irq_domain()")
changed the interrupt domain hierarchy so VMD's interrupt domain is not the
top domain anymore. irq_get_chip_data() now returns the chip_data at the
MSI devices' interrupt domains. It is therefore broken for vmd_msi_free()
to kfree() this chip_data.
Fix by extracting the chip_data associated with the VMD's interrupt domain.
====================
perf/s390: Regression: Move uid filtering to BPF filters
v4: https://lore.kernel.org/bpf/20250806114227.14617-1-iii@linux.ibm.com/
v4 -> v5: Fix a typo in the commit message (Yonghong).
v3: https://lore.kernel.org/bpf/20250805130346.1225535-1-iii@linux.ibm.com/
v3 -> v4: Rename the new field to dont_enable (Alexei, Eduard).
Switch the Fixes: tag in patch 2 (Alexander, Thomas).
Fix typos in the cover letter (Thomas).
v2: https://lore.kernel.org/bpf/20250728144340.711196-1-tmricht@linux.ibm.com/
v2 -> v3: Use no_ioctl_enable in perf.
This series fixes a regression caused by moving UID filtering to BPF.
The regression affects all events that support auxiliary data, most
notably, "cycles" events on s390, but also PT events on Intel. The
symptom is missing events when UID filtering is enabled.
Patch 1 introduces a new option for the
bpf_program__attach_perf_event_opts() function.
Patch 2 makes use of it in perf, and also contains a lot of technical
details of why exactly the problem is occurring.
Thanks to Thomas Richter for the investigation and the initial version
of this fix, and to Jiri Olsa for suggestions.
This allocates the ring buffer for the event 'cycles'. With mmap()
the kernel creates the ring buffer:
perf_mmap(): kernel function to create the event's ring
| buffer to save the sampled data.
|
+-> ring_buffer_attach(): Allocates memory for ring buffer.
| The PMU has auxiliary data setup function. The
| has_aux(event) condition is true and the PMU's
| stop() is called to stop sampling. It is not
| restarted:
|
| if (has_aux(event))
| perf_event_stop(event, 0);
|
+-> cpumsf_pmu_stop():
Hardware sampling is stopped. No samples are generated and saved
anymore.
3. After the event 'cycles' has been mapped, the event is enabled a
second time in:
return immediately because event::state is already set to
PERF_EVENT_STATE_ACTIVE.
This happens on s390, because the event 'cycles' offers the possibility
to save auxilary data. The PMU callbacks setup_aux() and free_aux() are
defined. Without both callback functions, cpumsf_pmu_stop() is not
invoked and sampling continues.
To remedy this, remove the first invocation of
ioctl(..., PERF_EVENT_IOC_ENABLE, ...).
in step (1.) Create the event in step (1.) and enable it in step (3.)
after the ring buffer has been mapped.
Output after:
# ./perf record -aB --synth=no -u 0 -- ./perf test -w thloop 2
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.876 MB perf.data ]
# ./perf report --stats | grep SAMPLE
SAMPLE events: 16200 (99.5%)
SAMPLE events: 16200
#
The software event succeeded both before and after the patch:
# ./perf record -e cpu-clock -aB --synth=no -u 0 -- \
./perf test -w thloop 2
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 2.870 MB perf.data ]
# ./perf report --stats | grep SAMPLE
SAMPLE events: 53506 (99.8%)
SAMPLE events: 53506
#
Fixes: b4c658d4d63d61 ("perf target: Remove uid from target") Suggested-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Co-developed-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20250806162417.19666-3-iii@linux.ibm.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
libbpf: Add the ability to suppress perf event enablement
Automatically enabling a perf event after attaching a BPF prog to it is
not always desirable.
Add a new "dont_enable" field to struct bpf_perf_event_opts. While
introducing "enable" instead would be nicer in that it would avoid
a double negation in the implementation, it would make
DECLARE_LIBBPF_OPTS() less efficient.
Acked-by: Eduard Zingerman <eddyz87@gmail.com> Suggested-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Co-developed-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20250806162417.19666-2-iii@linux.ibm.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Yu Kuai [Thu, 7 Aug 2025 03:24:13 +0000 (11:24 +0800)]
lib/sbitmap: make sbitmap_get_shallow() internal
Because it's only used in sbitmap.c
Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250807032413.1469456-3-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yu Kuai [Thu, 7 Aug 2025 03:24:12 +0000 (11:24 +0800)]
lib/sbitmap: convert shallow_depth from one word to the whole sbitmap
Currently elevators will record internal 'async_depth' to throttle
asynchronous requests, and they both calculate shallow_dpeth based on
sb->shift, with the respect that sb->shift is the available tags in one
word.
However, sb->shift is not the availbale tags in the last word, see
__map_depth:
For consequence, if the last word is used, more tags can be get than
expected, for example, assume nr_requests=256 and there are four words,
in the worst case if user set nr_requests=32, then the first word is
the last word, and still use bits per word, which is 64, to calculate
async_depth is wrong.
One the ohter hand, due to cgroup qos, bfq can allow only one request
to be allocated, and set shallow_dpeth=1 will still allow the number
of words request to be allocated.
Fix this problems by using shallow_depth to the whole sbitmap instead
of per word, also change kyber, mq-deadline and bfq to follow this,
a new helper __map_depth_with_shallow() is introduced to calculate
available bits in each word.
nvmet: exit debugfs after discovery subsystem exits
Commit 528589947c180 ("nvmet: initialize discovery subsys after debugfs
is initialized") changed nvmet_init() to initialize nvme discovery after
"nvmet" debugfs directory is initialized. The change broke nvmet_exit()
because discovery subsystem now depends on debugfs. Debugfs should be
destroyed after discovery subsystem. Fix nvmet_exit() to do that.
Reported-by: Yi Zhang <yi.zhang@redhat.com> Closes: https://lore.kernel.org/all/CAHj4cs96AfFQpyDKF_MdfJsnOEo=2V7dQgqjFv+k3t7H-=yGhA@mail.gmail.com/ Fixes: 528589947c180 ("nvmet: initialize discovery subsys after debugfs is initialized") Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Link: https://lore.kernel.org/r/20250807053507.2794335-1-mkhalfella@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
treewide: rename GPIO set callbacks back to their original names
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
projects / thirdparty / kernel / stable.git / log
