* gcc.target/aarch64/vect.c: Test and result vector added
for sabd and saba instructions.
* gcc.target/aarch64/vect-compile.c: Check for sabd and saba
instructions in assembly.
* gcc.target/aarch64/vect.x: Add sabd and saba test functions.
* gcc.target/aarch64/vect-fp.c: Test and result vector added
for fabd instruction.
* gcc.target/aarch64/vect-fp-compile.c: Check for fabd
instruction in assembly.
* gcc.target/aarch64/vect-fp.x: Add fabd test function.
* config/aarch64/aarch64-elf.h (REGISTER_PREFIX): Remove.
* config/aarch64/aarch64.c (aarch64_print_operand): Remove all
occurrence of REGISTER_PREFIX as its empty string.
law [Thu, 21 Mar 2013 04:42:40 +0000 (04:42 +0000)]
* tree-ssa-dom.c (record_equivalences_from_incoming_edge): Record
addititional equivalences for equality comparisons between an SSA_NAME
and a constant where the SSA_NAME was set from a widening conversion.
jason [Thu, 21 Mar 2013 03:25:35 +0000 (03:25 +0000)]
PR c++/54532
* expr.c (cplus_expand_constant): Do nothing if the class is
incomplete.
* semantics.c (reduced_constant_expression_p): Allow PTRMEM_CST.
* typeck2.c (store_init_value): Use reduced_constant_expression_p.
* decl.c (maybe_register_incomplete_var): Handle PTRMEM_CST.
(complete_vars): Likewise.
uros [Wed, 20 Mar 2013 16:49:06 +0000 (16:49 +0000)]
* config/i386/i386.md (*movti_internal): Set prefix attribute to
maybe_vex for sselog1 and ssemov types.
(*movdi_internal): Reorder operand constraints.
(*movsi_internal): Ditto. Set prefix attribute to
maybe_vex for sselog1 and ssemov types.
(*movtf_internal): Set prefix attribute to maybe_vex
for sselog1 and ssemov types.
(*movdf_internal): Ditto. Set prefix_data16 attribute for
DImode ssemov types. Reorder operand constraints.
(*movsf_internal): Set type of alternatives 3,4 to imov. Set prefix
attribute to maybe_vex for sselog1 and ssemov types. Set prefix_data16
attribute for SImode ssemov types. Reorder operand constraints.
2013-03-20 Michael Meissner <meissner@linux.vnet.ibm.com>
* config/rs6000/vector.md (VEC_R): Add 32-bit integer, binary
floating point, and decimal floating point to reload iterator.
* config/rs6000/constraints.md (wl constraint): New constraints to
return FLOAT_REGS if certain options are used to reduce the number
of separate patterns that exist in the file.
(wx constraint): Likewise.
(wz constraint): Likewise.
* config/rs6000/rs6000.c (rs6000_debug_reg_global): If
-mdebug=reg, print wg, wl, wx, and wz constraints.
(rs6000_init_hard_regno_mode_ok): Initialize new constraints.
Initialize the reload functions for 64-bit binary/decimal floating
point types.
(reg_offset_addressing_ok_p): If we are on a power7 or later, use
LFIWZX and STFIWX to load/store 32-bit decimal types, and don't
create the buffer on the stack to overcome not having a 32-bit
load and store.
(rs6000_emit_move): Likewise.
(rs6000_secondary_memory_needed_rtx): Likewise.
(rs6000_alloc_sdmode_stack_slot): Likewise.
(rs6000_preferred_reload_class): On VSX, we can create SFmode 0.0f
via xxlxor, just like DFmode 0.0.
* config/rs6000/rs6000.h (TARGET_NO_SDMODE_STACK): New macro,
define as 1 if we are running on a power7 or newer.
(enum r6000_reg_class_enum): Add new constraints.
* config/rs6000/dfp.md (movsd): Delete, combine with binary
floating point moves in rs6000.md. Combine power6x (mfpgpr) moves
with other moves by using conditional constraits (wg). Use LFIWZX
and STFIWX for loading SDmode on power7. Use xxlxor to create
0.0f.
(movsd splitter): Likewise.
(movsd_hardfloat): Likewise.
(movsd_softfloat): Likewise.
* config/rs6000/rs6000.md (FMOVE32): New iterators to combine
binary and decimal floating point moves.
(fmove_ok): New attributes to combine binary and decimal floating
point moves, and to combine power6x (mfpgpr) moves along normal
floating moves.
(real_value_to_target): Likewise.
(f32_lr): Likewise.
(f32_lm): Likewise.
(f32_li): Likewise.
(f32_sr): Likewise.
(f32_sm): Likewise.
(f32_si): Likewise.
(movsf): Combine binary and decimal floating point moves. Combine
power6x (mfpgpr) moves with other moves by using conditional
constraits (wg). Use LFIWZX and STFIWX for loading SDmode on
power7.
(mov<mode> for SFmode/SDmode); Likewise.
(SFmode/SDmode splitters): Likewise.
(movsf_hardfloat): Likewise.
(mov<mode>_hardfloat for SFmode/SDmode): Likewise.
(movsf_softfloat): Likewise.
(mov<mode>_softfloat for SFmode/SDmode): Likewise.
* doc/md.texi (PowerPC and IBM RS6000 constraints): Document wl,
wx and wz constraints.
* config/rs6000/constraints.md (wg constraint): New constraint to
return FLOAT_REGS if -mmfpgpr (power6x) was used.
* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Add wg
constraint.
* config/rs6000/rs6000.c (rs6000_debug_reg_global): If
-mdebug=reg, print wg, wl, wx, and wz constraints.
(rs6000_init_hard_regno_mode_ok): Initialize new constraints.
Initialize the reload functions for 64-bit binary/decimal floating
point types.
(reg_offset_addressing_ok_p): If we are on a power7 or later, use
LFIWZX and STFIWX to load/store 32-bit decimal types, and don't
create the buffer on the stack to overcome not having a 32-bit
load and store.
(rs6000_emit_move): Likewise.
(rs6000_secondary_memory_needed_rtx): Likewise.
(rs6000_alloc_sdmode_stack_slot): Likewise.
(rs6000_preferred_reload_class): On VSX, we can create SFmode 0.0f
via xxlxor, just like DFmode 0.0.
* config/rs6000/dfp.md (movdd): Delete, combine with binary
floating point moves in rs6000.md. Combine power6x (mfpgpr) moves
with other moves by using conditional constraits (wg). Use LFIWZX
and STFIWX for loading SDmode on power7.
(movdd splitters): Likewise.
(movdd_hardfloat32): Likewise.
(movdd_softfloat32): Likewise.
(movdd_hardfloat64_mfpgpr): Likewise.
(movdd_hardfloat64): Likewise.
(movdd_softfloat64): Likewise.
* config/rs6000/rs6000.md (FMOVE64): New iterators to combine
64-bit binary and decimal floating point moves.
(FMOVE64X): Likewise.
(movdf): Combine 64-bit binary and decimal floating point moves.
Combine power6x (mfpgpr) moves with other moves by using
conditional constraits (wg).
(mov<mode> for DFmode/DDmode): Likewise.
(DFmode/DDmode splitters): Likewise.
(movdf_hardfloat32): Likewise.
(mov<mode>_hardfloat32 for DFmode/DDmode): Likewise.
(movdf_softfloat32): Likewise.
(movdf_hardfloat64_mfpgpr): Likewise.
(movdf_hardfloat64): Likewise.
(mov<mode>_hardfloat64 for DFmode/DDmode): Likewise.
(movdf_softfloat64): Likewise.
(mov<mode>_softfloat64 for DFmode/DDmode): Likewise.
(reload_<mode>_load): Move to later in the file so they aren't in
the middle of the floating point move insns.
(reload_<mode>_store): Likewise.
* doc/md.texi (PowerPC and IBM RS6000 constraints): Document wg
constraint.
* config/rs6000/rs6000.c (rs6000_debug_reg_global): Print out wg
constraint if -mdebug=reg.
(rs6000_initi_hard_regno_mode_ok): Enable wg constraint if
-mfpgpr. Enable using dd reload support if needed.
* config/rs6000/dfp.md (movtd): Delete, combine with 128-bit
binary and decimal floating point moves in rs6000.md.
(movtd_internal): Likewise.
* config/rs6000/rs6000.md (movdi_mfpgpr): Delete, combine with
movdi_internal64, using wg constraint for move direct operations.
(movdi_internal64): Likewise.
* config/rs6000/rs6000.c (rs6000_debug_reg_global): Print
MODES_TIEABLE_P for selected modes. Print the numerical value of
the various virtual registers. Use GPR/FPR first/last values,
instead of hard coding the register numbers. Print which modes
have reload functions registered.
(rs6000_option_override_internal): If -mdebug=reg, trace the
options settings before/after setting cpu, target and subtarget
settings.
(rs6000_secondary_reload_trace): Improve the RTL dump for
-mdebug=addr and for secondary reload failures in
rs6000_secondary_reload_inner.
(rs6000_secondary_reload_fail): Likewise.
(rs6000_secondary_reload_inner): Likewise.
* config/rs6000/rs6000.md (FIRST_GPR_REGNO): Add convenience
macros for first/last GPR and FPR registers.
(LAST_GPR_REGNO): Likewise.
(FIRST_FPR_REGNO): Likewise.
(LAST_FPR_REGNO): Likewise.
* config/rs6000/vector.md (mul<mode>3): Use the combined macro
VECTOR_UNIT_ALTIVEC_OR_VSX_P instead of separate calls to
VECTOR_UNIT_ALTIVEC_P and VECTOR_UNIT_VSX_P.
(vcond<mode><mode>): Likewise.
(vcondu<mode><mode>): Likewise.
(vector_gtu<mode>): Likewise.
(vector_gte<mode>): Likewise.
(xor<mode>3): Don't allow logical operations on TImode in 32-bit
to prevent the compiler from converting DImode operations to
TImode.
(ior<mode>3): Likewise.
(and<mode>3): Likewise.
(one_cmpl<mode>2): Likewise.
(nor<mode>3): Likewise.
(andc<mode>3): Likewise.
* config/rs6000/constraints.md (wt constraint): New constraint
that returns VSX_REGS if TImode is allowed in VSX registers.
* config/rs6000/predicates.md (easy_fp_constant): 0.0f is an easy
constant under VSX.
* config/rs6000/rs6000-modes.def (PTImode): Define, PTImode is
similar to TImode, but it is restricted to being in the GPRs.
* config/rs6000/rs6000.opt (-mvsx-timode): New switch to allow
TImode to occupy a single VSX register.
* config/rs6000/rs6000-cpus.def (ISA_2_6_MASKS_SERVER): Default to
-mvsx-timode for power7/power8.
(power7 cpu): Likewise.
(power8 cpu): Likewise.
* config/rs6000/rs6000.c (rs6000_hard_regno_nregs_internal): Make
sure that TFmode/TDmode take up two registers if they are ever
allowed in the upper VSX registers.
(rs6000_hard_regno_mode_ok): If -mvsx-timode, allow TImode in VSX
registers.
(rs6000_init_hard_regno_mode_ok): Likewise.
(rs6000_debug_reg_global): Add debugging for PTImode and wt
constraint. Print if LRA is turned on.
(rs6000_option_override_internal): Give an error if -mvsx-timode
and VSX is not enabled.
(invalid_e500_subreg): Handle PTImode, restricting it to GPRs. If
-mvsx-timode, restrict TImode to reg+reg addressing, and PTImode
to reg+offset addressing. Use PTImode when checking offset
addresses for validity.
(reg_offset_addressing_ok_p): Likewise.
(rs6000_legitimate_offset_address_p): Likewise.
(rs6000_legitimize_address): Likewise.
(rs6000_legitimize_reload_address): Likewise.
(rs6000_legitimate_address_p): Likewise.
(rs6000_eliminate_indexed_memrefs): Likewise.
(rs6000_emit_move): Likewise.
(rs6000_secondary_reload): Likewise.
(rs6000_secondary_reload_inner): Handle PTImode. Allow 64-bit
reloads to fpr registers to continue to use reg+offset addressing,
but 64-bit reloads to altivec registers need reg+reg addressing.
Drop test for PRE_MODIFY, since VSX loads/stores no longer support
it. Treat LO_SUM like a PLUS operation.
(rs6000_secondary_reload_class): If type is 64-bit, prefer to use
FLOAT_REGS instead of VSX_RGS to allow use of reg+offset
addressing.
(rs6000_cannot_change_mode_class): Do not allow TImode in VSX
registers to share a register with a smaller sized type, since VSX
puts scalars in the upper 64-bits.
(print_operand): Add support for PTImode.
(rs6000_register_move_cost): Use VECTOR_MEM_VSX_P instead of
VECTOR_UNIT_VSX_P to catch types that can be loaded in VSX
registers, but don't have arithmetic support.
(rs6000_memory_move_cost): Add test for VSX.
(rs6000_opt_masks): Add -mvsx-timode.
* config/rs6000/vsx.md (VSm): Change to use 64-bit aligned moves
for TImode.
(VSs): Likewise.
(VSr): Use wt constraint for TImode.
(VSv): Drop TImode support.
(vsx_movti): Delete, replace with versions for 32-bit and 64-bit.
(vsx_movti_64bit): Likewise.
(vsx_movti_32bit): Likewise.
(vec_store_<mode>): Use VSX iterator instead of vector iterator.
(vsx_and<mode>3): Delete use of '?' constraint on inputs, just put
one '?' on the appropriate output constraint. Do not allow TImode
logical operations on 32-bit systems.
(vsx_ior<mode>3): Likewise.
(vsx_xor<mode>3): Likewise.
(vsx_one_cmpl<mode>2): Likewise.
(vsx_nor<mode>3): Likewise.
(vsx_andc<mode>3): Likewise.
(vsx_concat_<mode>): Likewise.
(vsx_xxpermdi_<mode>): Fix thinko for non V2DF/V2DI modes.
* config/rs6000/rs6000.h (MASK_VSX_TIMODE): Map from
OPTION_MASK_VSX_TIMODE.
(enum rs6000_reg_class_enum): Add RS6000_CONSTRAINT_wt.
(STACK_SAVEAREA_MODE): Use PTImode instead of TImode.
* config/rs6000/rs6000.md (INT mode attribute): Add PTImode.
(TI2 iterator): New iterator for TImode, PTImode.
(wd mode attribute): Add values for vector types.
(movti_string): Replace TI move operations with operations for
TImode and PTImode. Add support for TImode being allowed in VSX
registers.
(mov<mode>_string, TImode/PTImode): Likewise.
(movti_ppc64): Likewise.
(mov<mode>_ppc64, TImode/PTImode): Likewise.
(TI mode splitters): Likewise.
* doc/md.texi (PowerPC and IBM RS6000 constraints): Document wt
constraint.
[gcc/testsuite]
2013-03-20 Michael Meissner <meissner@linux.vnet.ibm.com>
clm [Wed, 20 Mar 2013 14:37:52 +0000 (14:37 +0000)]
gcc/
2013-03-20 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Tom de Vries <tom@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Iain Sandoe <iain@codesourcery.com>
Nathan Froyd <froydnj@codesourcery.com>
Chao-ying Fu <fu@mips.com>
* doc/extend.texi: (micromips, nomicromips, nocompression):
Document new function attributes.
* doc/invoke.texi (minterlink-compressed, mmicromips,
m14k, m14ke, m14kec): Document new options.
(minterlink-mips16): Update documentation.
* doc/md.texi (ZC, ZD): Document new constraints.
* configure.ac (gcc_cv_as_micromips): Check if linker
supports the .set micromips directive.
* configure: Regenerate.
* config.in: Regenerate.
* config/mips/mips-tables.opt: Regenerate.
* config/mips/micromips.md: New file.
* constraints.md (ZC, ZD): New constraints.
* config/mips/predicates.md (movep_src_register): New predicate.
(movep_src_operand): New predicate.
(non_volatile_mem_operand): New predicate.
* config/mips/mips.md (multimem): New type.
(length): Differentiate between 17-bit and 18-bit branch offsets.
(MOVEP1, MOVEP2): New mode iterator.
(mov_<load>l): Use ZC constraint.
(mov_<load>r): Likewise.
(mov_<store>l): Likewise.
(mov_<store>r): Likewise.
(*branch_equality<mode>_inverted): Add microMIPS support.
(*branch_equality<mode>): Likewise.
(*jump_absolute): Likewise.
(indirect_jump_<mode>): Likewise.
(tablejump_<mode>): Likewise.
(<optab>_internal): Likewise.
(sibcall_internal): Likewise.
(sibcall_value_internal): Likewise.
(prefetch): Use constraint ZD.
* config/mips/mips.opt (minterlink-compressed): New option.
(minterlink-mips16): Now an alias for minterlink-compressed.
(mmicromips): New option.
* config/mips/sync.md (sync_compare_and_swap<mode>): Use ZR constraint.
(compare_and_swap_12): Likewise.
(sync_add<mode>): Likewise.
(sync_<optab>_12): Likewise.
(sync_old_<optab>_12): Likewise.
(sync_new_<optab>_12): Likewise.
(sync_nand_12): Likewise.
(sync_old_nand_12): Likewise.
(sync_new_nand_12): Likewise.
(sync_sub<mode>): Likewise.
(sync_old_add<mode>): Likewise.
(sync_old_sub<mode>): Likewise.
(sync_new_add<mode>): Likewise.
(sync_new_sub<mode>): Likewise.
(sync_<optab><mode>): Likewise.
(sync_old_<optab><mode>): Likewise.
(sync_new_<optab><mode>): Likewise.
(sync_nand<mode>): Likewise.
(sync_old_nand<mode>): Likewise.
(sync_new_nand<mode>): Likewise.
(sync_lock_test_and_set<mode>): Likewise.
(test_and_set_12): Likewise.
(atomic_compare_and_swap<mode>): Likewise.
(atomic_exchange<mode>_llsc): Likewise.
(atomic_fetch_add<mode>_llsc): Likewise.
* config/mips/mips-cpus.def (m14kc, m14k): New processors.
* config/mips/mips-protos.h (umips_output_save_restore): New prototype.
(umips_save_restore_pattern_p): Likewise.
(umips_load_store_pair_p): Likewise.
(umips_output_load_store_pair): Likewise.
(umips_movep_target_p): Likewise.
(umips_12bit_offset_address_p): Likewise.
* config/mips/mips.c (MIPS_MAX_FIRST_STEP): Update for microMIPS.
(mips_base_mips16): Rename this...
(mips_base_compression_flags): ...to this. Update all uses.
(mips_attribute_table): Add micromips, nomicromips and nocompression.
(mips_mips16_decl_p): Delete.
(mips_nomips16_decl_p): Delete.
(mips_get_compress_on_flags): New function.
(mips_get_compress_off_flags): New function.
(mips_get_compress_mode): New function.
(mips_get_compress_on_name): New function.
(mips_get_compress_off_name): New function.
(mips_insert_attributes): Support multiple compression types.
(mips_merge_decl_attributes): Likewise.
(umips_12bit_offset_address_p): New function.
(mips_start_function_definition): Emit .set micromips directive.
(mips_call_may_need_jalx_p): New function.
(mips_function_ok_for_sibcall): Add microMIPS support.
(mips_print_operand_punctuation): Support short delay slots and
compact jumps.
(umips_swm_mask, umips_swm_encoding): New.
(umips_build_save_restore): New function.
(mips_for_each_saved_gpr_and_fpr): Add microMIPS support.
(was_mips16_p): Remove.
(old_compression_mode): New.
(mips_set_compression_mode): New function.
(mips_set_current_function): Add microMIPS support.
(mips_option_override): Likewise.
(umips_save_restore_pattern_p): New function.
(umips_output_save_restore): New function.
(umips_load_store_pair_p_1): New function.
(umips_load_store_pair_p): New function.
(umips_output_load_store_pair_1): New function.
(umips_output_load_store_pair): New function.
(umips_movep_target_p) New function.
(mips_prepare_pch_save): Add microMIPS support.
* config/mips/mips.h (TARGET_COMPRESSION): New.
(TARGET_CPU_CPP_BUILTINS): Update macro
to use new compression flags and to support microMIPS.
(MIPS_ISA_LEVEL_SPEC): Add m14k processors.
(MIPS_ARCH_FLOAT_SPEC): Likewise.
(ISA_HAS_LWXS): Include TARGET_MICROMIPS.
(ISA_HAS_LOAD_DELAY): Exclude TARGET_MICROMIPS.
(ASM_SPEC): Support mmicromips and mno-micromips.
(M16STORE_REG_P): New macro.
(MIPS_CALL): Support TARGET_MICROMIPS.
(MICROMIPS_J): New macro.
(mips_base_mips16): Rename this...
(mips_base_compression_flags): ...to this.
(UMIPS_12BIT_OFFSET_P): New macro.
* config/mips/t-sde: (MULTILIB_OPTIONS): Add microMIPS.
(MULTILIB_DIRNAMES): Likewise.
libgcc/
2013-03-20 Catherine Moore <clm@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Chao-ying Fu <fu@mips.com>
* config/mips/mips16.S: Don't build for microMIPS.
* config/mips/linux-unwind.h: Handle microMIPS frame.
* config/mips/crtn.S (fini, init): New labels.
gcc/testsuite/
2013-03-20 Catherine Moore <clm@codesourcery.com>
Richard Sandiford <rdsandiford@googlemail.com>
* gcc.target/mips/mips.exp: Add microMIPS support.
* gcc.target/mips/umips-movep-2.c: New test.
* gcc.target/mips/umips-lwp-2.c: New test.
* gcc.target/mips/umips-swp-5.c: New test.
* gcc.target/mips/umips-constraints-1.c: New test.
* gcc.target/mips/umips-lwp-3.c: New test.
* gcc.target/mips/umips-swp-6.c: New test.
* gcc.target/mips/umips-constraints-2.c: New test.
* gcc.target/mips/umips-save-restore-1.c: New test.
* gcc.target/mips/umips-lwp-4.c: New test.
* gcc.target/mips/umips-swp-7.c: New test.
* gcc.target/mips/umips-save-restore-2.c: New test.
* gcc.target/mips/umips-lwp-swp-volatile.c: New test.
* gcc.target/mips/umips-lwp-5.c: New test.
* gcc.target/mips/umips-save-restore-3.c: New test.
* gcc.target/mips/umips-lwp-6.c: New test.
* gcc.target/mips/umips-swp-1.c: New test.
* gcc.target/mips/umips-lwp-7.c: New test.
* gcc.target/mips/umips-swp-2.c: New test.
* gcc.target/mips/umips-lwp-8.c: New test.
* gcc.target/mips/umips-swp-3.c: New test.
* gcc.target/mips/umips-movep-1.c: New test.
* gcc.target/mips/umips-lwp-1.c: New test.
* gcc.target/mips/umips-swp-4.c: New test.
rguenth [Wed, 20 Mar 2013 09:06:24 +0000 (09:06 +0000)]
2013-03-20 Richard Biener <rguenther@suse.de>
* tree-ssa-structalias.c (struct variable_info): Add pointer
to the first field of an aggregate with sub-vars. Make
this and the pointer to the next subfield its ID.
(vi_next): New function.
(nothing_id, anything_id, readonly_id, escaped_id, nonlocal_id,
storedanything_id, integer_id): Increment by one.
(new_var_info, get_call_vi, lookup_call_clobber_vi,
get_call_clobber_vi): Adjust.
(solution_set_expand): Simplify and speedup.
(solution_set_add): Inline into ...
(set_union_with_increment): ... this. Adjust accordingly.
(do_sd_constraint): Likewise.
(do_ds_constraint): Likewise.
(do_complex_constraint): Simplify.
(build_pred_graph): Adjust.
(solve_graph): Likewise. Simplify and speedup.
(get_constraint_for_ssa_var, get_constraint_for_ptr_offset,
get_constraint_for_component_ref, get_constraint_for_1,
first_vi_for_offset, first_or_preceding_vi_for_offset,
create_function_info_for, create_variable_info_for_1,
create_variable_info_for, intra_create_variable_infos): Adjust.
(init_base_vars): Push NULL for ID zero.
(compute_points_to_sets): Adjust.
burnus [Wed, 20 Mar 2013 07:56:02 +0000 (07:56 +0000)]
2013-03-20 Tilo Schwarz <tilo@tilo-schwarz.de>
PR libfortran/51825
* io/list_read.c (nml_read_obj): Don't end the component loop on
a nested derived type, but continue with the next loop iteration.
(nml_get_obj_data): Don't move the first_nl pointer further in
the list if a qualifier was found.
jb [Tue, 19 Mar 2013 11:13:32 +0000 (11:13 +0000)]
Use C99 bool instead of enum try.
2013-03-19 Janne Blomqvist <jb@gcc.gnu.org>
* libgfortran.h: Include stdbool.h.
(enum try): Remove.
(notify_std): Change return type to bool.
* intrinsics/chmod.c: Don't include stdbool.h.
* intrinsics/execute_command_line.c: Likewise.
* io/format.c: Likewise.
* io/list_read.c (nml_parse_qualifier): Change return type to bool.
(nml_read_obj): Likewise.
(nml_get_obj_data): Likewise.
* io/transfer.c (read_block_form): Fix comment.
(write_buf): Change return type to bool.
* io/write.c: Don't include stdbool.h.
* io/write_float.def (output_float): Change return type to bool.
(output_float_FMT_G_ ## x): Change type of result variable.
* runtime/error.c (notify_std): Change return type to bool.
uros [Tue, 19 Mar 2013 07:36:15 +0000 (07:36 +0000)]
* config/i386/i386.md (*movti_internal): Merge from
*movti_internal_rex64 and *movti_internal_sse. Use x64 isa attribute.
(*movdi_internal): Merge with *movdi_internal_rex64. Use x64 and
nox64 isa attributes.
rguenth [Mon, 18 Mar 2013 13:58:29 +0000 (13:58 +0000)]
2013-03-18 Richard Biener <rguenther@suse.de>
* tree-ssa-structalias.c (find): Use gcc_checking_assert.
(unite): Likewise.
(merge_node_constraints): Likewise.
(build_succ_graph): Likewise.
(valid_graph_edge): Inline into single caller.
(unify_nodes): Likewise. Use bitmap_set_bit return value
and cache varinfo.
(scc_visit): Fix formatting and variable use.
(do_sd_constraint): Use gcc_checking_assert.
(do_ds_constraint): Likewise.
(do_complex_constraint): Likewise.
(condense_visit): Likewise. Cleanup.
(dump_pred_graph): New function.
(perform_var_substitution): Dump the pred-graph before
variable substitution.
(find_equivalent_node): Use gcc_checking_assert.
(rewrite_constraints): Guard checking loop with ENABLE_CHECKING.
rguenth [Mon, 18 Mar 2013 13:57:33 +0000 (13:57 +0000)]
2013-03-18 Richard Biener <rguenther@suse.de>
* tree-vect-loop-manip.c (vect_create_cond_for_alias_checks):
Remove cond_expr_stmt_list argument and do not gimplify the
built expression.
(vect_loop_versioning): Adjust.
* tree-vect-data-refs.c (vect_create_addr_base_for_vector_ref):
Cleanup to use less temporaries.
(vect_create_data_ref_ptr): Cleanup.
rguenth [Mon, 18 Mar 2013 10:25:42 +0000 (10:25 +0000)]
2013-03-18 Richard Biener <rguenther@suse.de>
* tree-data-ref.h (find_data_references_in_loop): Declare.
* tree-data-ref.c (get_references_in_stmt): Use a stack
vector pre-allocated in the callers.
(find_data_references_in_stmt): Adjust.
(graphite_find_data_references_in_stmt): Likewise.
(create_rdg_vertices): Likewise.
(find_data_references_in_loop): Export.
* tree-vect-data-refs.c (vect_analyze_data_ref_dependences):
Compute dependences here...
(vect_analyze_data_refs): ...not here. When we encounter
a non-vectorizable data reference in basic-block vectorization
truncate the data reference vector. Do not bother to
fixup data-dependence information for gather loads.
* tree-vect-slp.c (vect_slp_analyze_bb_1): Check the number
of data references, as reported.
rguenth [Mon, 18 Mar 2013 08:50:35 +0000 (08:50 +0000)]
2013-03-18 Richard Biener <rguenther@suse.de>
* tree-ssa-loop-manip.c (find_uses_to_rename): Do not scan the
whole function when there is nothing to do.
* tree-ssa-loop.c (pass_vectorize): Remove TODO_update_ssa.
* tree-vectorizer.c (vectorize_loops): Update virtual and
loop-closed SSA once.
* tree-vect-loop.c (vect_transform_loop): Do not update SSA here.
rguenth [Mon, 18 Mar 2013 08:46:44 +0000 (08:46 +0000)]
2013-03-18 Richard Biener <rguenther@suse.de>
PR middle-end/56113
* domwalk.c (bb_postorder): New global static.
(cmp_bb_postorder): New function.
(walk_dominator_tree): Replace scheme imposing an order for
visiting dominator sons by one sorting them at the time they
are pushed on the stack.
uros [Sun, 17 Mar 2013 19:33:40 +0000 (19:33 +0000)]
* config/i386/i386.md (isa): Add x64 and nox64.
(enabled): Define x64 for TARGET_64BIT and nox64 for !TARGET_64BIT.
(*pushtf): Enable *roF alternative for x64 isa only.
(*pushxf): Merge with *pushxf_nointeger. Use Yx*r constraint. Set
mode attribute of integer alternatives to DImode for TARGET_64BIT.
(*pushdf): Merge with *pushdf_rex64. Use x64 and nox64 isa attributes.
(*movtf_internal): Merge from *movtf_internal_rex64 and
*movtf_internal_sse. Use x64 and nox64 isa attributes.
(*movxf_internal): Merge with *movxf_internal_rex64. Use x64 and
nox64 isa attributes.
(*movdf_internal): Merge with *movdf_internal_rex64. Use x64 and
nox64 isa attributes.
* config/i386/constraints.md (Yd): Do not set for TARGET_64BIT.
jason [Sun, 17 Mar 2013 02:41:22 +0000 (02:41 +0000)]
PR c++/54277
* cp-tree.h (WILDCARD_TYPE_P): Split out from...
(MAYBE_CLASS_TYPE_P): ...here.
* semantics.c (lambda_capture_field_type): Only build a
magic decltype for wildcard types.
(lambda_proxy_type): Likewise.
(finish_non_static_data_member): Get the quals from
the object.
jason [Sun, 17 Mar 2013 02:37:09 +0000 (02:37 +0000)]
N3276
PR c++/52748
* cp-tree.h (tsubst_flags): Add tf_decltype.
* call.c (build_cxx_call): Don't build a temporary if it's set.
(build_over_call): Make sure it's only passed to build_cxx_call.
* parser.c (cp_parser_primary_expression): Add decltype_p parm.
(cp_parser_unary_expression): Likewise.
(cp_parser_cast_expression): Likewise.
(cp_parser_binary_expression): Likewise.
(cp_parser_assignment_expression): Likewise.
(cp_parser_postfix_expression): Likewise. Pass tf_decltype.
(cp_parser_explicit_instantiation): Add decltype_p. Force a
temporary for a call on the LHS of a comma.
(cp_parser_decltype): Pass true to decltype_p parms.
* pt.c (tsubst) [DECLTYPE_TYPE]: Pass tf_decltype.
(tsubst_copy_and_build): Pass tf_decltype down only for
CALL_EXPR and the RHS of COMPOUND_EXPR.
* tree.c (build_cplus_new): Call complete_type_or_maybe_complain.
jason [Sun, 17 Mar 2013 02:33:38 +0000 (02:33 +0000)]
PR c++/56095
* class.c (resolve_address_of_overloaded_function): Accept a
reference to function for target_type.
(instantiate_type): Likewise.
* pt.c (convert_nontype_argument): Pass it to
convert_nontype_argument_function.
redi [Sat, 16 Mar 2013 19:45:53 +0000 (19:45 +0000)]
PR libstdc++/56002
* include/std/mutex (lock_guard, unique_lock, lock): Define without
depending on _GLIBCXX_HAS_GTHREADS.
* testsuite/30_threads/lock_guard/cons/1.cc: Run on all targets.
projects / thirdparty / gcc.git / log
